Nomadik was mainlined once and has never got any attention. It still
doesn't have PBL support or device tree support. Remove the ancient
and likely unused architecture.
Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
arch/arm/Kconfig | 10 --
arch/arm/Makefile | 1 -
arch/arm/boards/Makefile | 1 -
arch/arm/boards/nhk8815/Makefile | 5 -
.../boards/nhk8815/defaultenv-nhk8815/config | 43 -------
arch/arm/boards/nhk8815/lowlevel.c | 12 --
arch/arm/boards/nhk8815/setup.c | 113 ------------------
arch/arm/configs/nhk8815_defconfig | 50 --------
arch/arm/include/asm/debug_ll.h | 2 -
arch/arm/include/asm/mach-types.h | 12 --
arch/arm/mach-nomadik/8815.c | 71 -----------
arch/arm/mach-nomadik/Kconfig | 23 ----
arch/arm/mach-nomadik/Makefile | 4 -
arch/arm/mach-nomadik/clock.c | 55 ---------
arch/arm/mach-nomadik/clock.h | 14 ---
arch/arm/mach-nomadik/reset.c | 42 -------
arch/arm/mach-nomadik/timer.c | 33 -----
include/mach/nomadik/board.h | 24 ----
include/mach/nomadik/fsmc.h | 30 -----
include/mach/nomadik/hardware.h | 87 --------------
include/mach/nomadik/nand.h | 15 ---
21 files changed, 647 deletions(-)
delete mode 100644 arch/arm/boards/nhk8815/Makefile
delete mode 100644 arch/arm/boards/nhk8815/defaultenv-nhk8815/config
delete mode 100644 arch/arm/boards/nhk8815/lowlevel.c
delete mode 100644 arch/arm/boards/nhk8815/setup.c
delete mode 100644 arch/arm/configs/nhk8815_defconfig
delete mode 100644 arch/arm/mach-nomadik/8815.c
delete mode 100644 arch/arm/mach-nomadik/Kconfig
delete mode 100644 arch/arm/mach-nomadik/Makefile
delete mode 100644 arch/arm/mach-nomadik/clock.c
delete mode 100644 arch/arm/mach-nomadik/clock.h
delete mode 100644 arch/arm/mach-nomadik/reset.c
delete mode 100644 arch/arm/mach-nomadik/timer.c
delete mode 100644 include/mach/nomadik/board.h
delete mode 100644 include/mach/nomadik/fsmc.h
delete mode 100644 include/mach/nomadik/hardware.h
delete mode 100644 include/mach/nomadik/nand.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7f84a1a12b..bf3240df96 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -93,15 +93,6 @@ config ARCH_MXS
select HAS_DEBUG_LL
select HAVE_PBL_MULTI_IMAGES
-config ARCH_NOMADIK
- bool "STMicroelectronics Nomadik"
- depends on 32BIT
- select CPU_ARM926T
- select CLOCKSOURCE_NOMADIK
- select HAVE_LEGACY_CLK
- help
- Support for the Nomadik platform by ST-Ericsson
-
config ARCH_OMAP_SINGLE
bool "TI OMAP"
depends on 32BIT
@@ -271,7 +262,6 @@ source "arch/arm/mach-imx/Kconfig"
source "arch/arm/mach-layerscape/Kconfig"
source "arch/arm/mach-mxs/Kconfig"
source "arch/arm/mach-mvebu/Kconfig"
-source "arch/arm/mach-nomadik/Kconfig"
source "arch/arm/mach-k3/Kconfig"
source "arch/arm/mach-omap/Kconfig"
source "arch/arm/mach-pxa/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index beb1c102c9..67362d2023 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -90,7 +90,6 @@ machine-$(CONFIG_ARCH_K3) += k3
machine-$(CONFIG_ARCH_LAYERSCAPE) += layerscape
machine-$(CONFIG_ARCH_MXS) += mxs
machine-$(CONFIG_ARCH_MVEBU) += mvebu
-machine-$(CONFIG_ARCH_NOMADIK) += nomadik
machine-$(CONFIG_ARCH_OMAP) += omap
machine-$(CONFIG_ARCH_PXA) += pxa
machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index fc7a829900..ca6f8f2137 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -63,7 +63,6 @@ obj-$(CONFIG_MACH_MX28EVK) += freescale-mx28-evk/
obj-$(CONFIG_MACH_MYIRTECH_X335X) += myirtech-x335x/
obj-$(CONFIG_MACH_NETGEAR_RN104) += netgear-rn104/
obj-$(CONFIG_MACH_NETGEAR_RN2120) += netgear-rn2120/
-obj-$(CONFIG_MACH_NOMADIK_8815NHK) += nhk8815/
obj-$(CONFIG_MACH_NVIDIA_BEAVER) += nvidia-beaver/
obj-$(CONFIG_MACH_NVIDIA_JETSON) += nvidia-jetson-tk1/
obj-$(CONFIG_MACH_NXP_IMX6ULL_EVK) += nxp-imx6ull-evk/
diff --git a/arch/arm/boards/nhk8815/Makefile b/arch/arm/boards/nhk8815/Makefile
deleted file mode 100644
index 0367fa7dd5..0000000000
--- a/arch/arm/boards/nhk8815/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-obj-y += setup.o
-lwl-y += lowlevel.o
-bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-nhk8815
diff --git a/arch/arm/boards/nhk8815/defaultenv-nhk8815/config b/arch/arm/boards/nhk8815/defaultenv-nhk8815/config
deleted file mode 100644
index c05ed2704e..0000000000
--- a/arch/arm/boards/nhk8815/defaultenv-nhk8815/config
+++ /dev/null
@@ -1,43 +0,0 @@
-#!/bin/sh
-
-# use 'dhcp' to do dhcp in barebox and in kernel
-# use 'none' if you want to skip kernel ip autoconfiguration
-ip=dhcp
-
-# or set your networking parameters here
-#eth0.ipaddr=a.b.c.d
-#eth0.netmask=a.b.c.d
-#eth0.gateway=a.b.c.d
-#eth0.serverip=a.b.c.d
-
-# can be either 'nfs', 'tftp' or 'nand'
-kernel_loc=tftp
-# can be either 'net', 'nand' or 'initrd'
-rootfs_loc=net
-
-# can be either 'jffs2' or 'ubifs'
-rootfs_type=ubifs
-rootfsimage=root.$rootfs_type
-
-#kernelimage=zImage
-kernelimage=uImage
-#kernelimage=Image
-#kernelimage=Image.lzo
-
-# Partition Size Start
-# XloaderTOC + X-Loader 256KB 0x00000000
-# Memory init function 256KB 0x00040000
-# Barebox + env 2MB 0x00080000
-# Kernel Image 3MB 0x00280000
-# JFFS2 Root filesystem 22MB 0x00580000
-# JFFS2 User Data 100MB 0x01b80000
-
-nand_parts="256k(xloader)ro,256k(meminit),2M(barebox),3M(kernel),22M(rootfs),100M(userfs),384k(free),128k(bareboxenv)"
-
-autoboot_timeout=3
-
-bootargs="root=/dev/ram0 console=ttyAMA1,115200n8 init=linuxrc"
-
-# set a fancy prompt (if support is compiled in)
-PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
-
diff --git a/arch/arm/boards/nhk8815/lowlevel.c b/arch/arm/boards/nhk8815/lowlevel.c
deleted file mode 100644
index 9ba5bbffad..0000000000
--- a/arch/arm/boards/nhk8815/lowlevel.c
+++ /dev/null
@@ -1,12 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <common.h>
-#include <linux/sizes.h>
-#include <asm/barebox-arm-head.h>
-#include <asm/barebox-arm.h>
-
-void __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2)
-{
- arm_cpu_lowlevel_init();
- barebox_arm_entry(0x0, SZ_64M, NULL);
-}
diff --git a/arch/arm/boards/nhk8815/setup.c b/arch/arm/boards/nhk8815/setup.c
deleted file mode 100644
index c7a2afdbfe..0000000000
--- a/arch/arm/boards/nhk8815/setup.c
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnio@xxxxxxxxxxxx>
-
-#include <common.h>
-#include <init.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <nand.h>
-#include <asm/armlinux.h>
-#include <asm/mach-types.h>
-#include <io.h>
-#include <envfs.h>
-
-#include <mach/nomadik/hardware.h>
-#include <mach/nomadik/board.h>
-#include <mach/nomadik/nand.h>
-#include <mach/nomadik/fsmc.h>
-
-static int nhk8815_nand_init(void)
-{
- /* FSMC setup for nand chip select (8-bit nand in 8815NHK) */
- writel(0x0000000E, FSMC_PCR(0));
- writel(0x000D0A00, FSMC_PMEM(0));
- writel(0x00100A00, FSMC_PATT(0));
-
- /* enable access to the chip select area */
- writel(readl(FSMC_PCR(0)) | 0x04, FSMC_PCR(0));
-
- return 0;
-}
-
-static struct nomadik_nand_platform_data nhk8815_nand_data = {
- .init = nhk8815_nand_init,
-};
-
-static struct resource nhk8815_nand_resources[] = {
- {
- .name = "nand_addr",
- .start = NAND_IO_ADDR,
- .end = NAND_IO_ADDR + 0xfff,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "nand_cmd",
- .start = NAND_IO_CMD,
- .end = NAND_IO_CMD + 0xfff,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "nand_data",
- .start = NAND_IO_DATA,
- .end = NAND_IO_DATA + 0xfff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct device nhk8815_nand_device = {
- .id = DEVICE_ID_DYNAMIC,
- .name = "nomadik_nand",
- .num_resources = ARRAY_SIZE(nhk8815_nand_resources),
- .resource = nhk8815_nand_resources,
- .platform_data = &nhk8815_nand_data,
-};
-
-static int nhk8815_mem_init(void)
-{
- st8815_add_device_sdram(64 * 1024 *1024);
-
- return 0;
-}
-mem_initcall(nhk8815_mem_init);
-
-static int nhk8815_devices_init(void)
-{
- writel(0xC37800F0, NOMADIK_GPIO1_BASE + 0x20);
- writel(0x00000000, NOMADIK_GPIO1_BASE + 0x24);
- writel(0x00000000, NOMADIK_GPIO1_BASE + 0x28);
- writel(readl(NOMADIK_SRC_BASE) | 0x8000, NOMADIK_SRC_BASE);
-
- /* Set up SMCS1 for Ethernet: sram-like, enabled, timing values */
- writel(0x0000305b, FSMC_BCR(1));
- writel(0x00033f33, FSMC_BTR(1));
-
- add_generic_device("smc91c111", DEVICE_ID_DYNAMIC, NULL, 0x34000300, 16,
- IORESOURCE_MEM, NULL);
-
- platform_device_register(&nhk8815_nand_device);
-
- armlinux_set_architecture(MACH_TYPE_NOMADIK);
-
- devfs_add_partition("nand0", 0x0000000, 0x040000, DEVFS_PARTITION_FIXED, "xloader_raw");
- devfs_add_partition("nand0", 0x0040000, 0x080000, DEVFS_PARTITION_FIXED, "meminit_raw");
- devfs_add_partition("nand0", 0x0080000, 0x200000, DEVFS_PARTITION_FIXED, "self_raw");
- dev_add_bb_dev("self_raw", "self0");
- devfs_add_partition("nand0", 0x7FE0000, 0x020000, DEVFS_PARTITION_FIXED, "env_raw");
- dev_add_bb_dev("env_raw", "env0");
-
- if (IS_ENABLED(CONFIG_DEFAULT_ENVIRONMENT_GENERIC))
- defaultenv_append_directory(defaultenv_nhk8815);
-
- return 0;
-}
-device_initcall(nhk8815_devices_init);
-
-static int nhk8815_console_init(void)
-{
- barebox_set_model("Nomadik nhk8815");
- barebox_set_hostname("nhk8815");
-
- st8815_register_uart(1);
-
- return 0;
-}
-
-console_initcall(nhk8815_console_init);
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
deleted file mode 100644
index b2816f563b..0000000000
--- a/arch/arm/configs/nhk8815_defconfig
+++ /dev/null
@@ -1,50 +0,0 @@
-CONFIG_TEXT_BASE=0x03F80000
-CONFIG_ARCH_NOMADIK=y
-CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_PROMPT="Nomadik:"
-CONFIG_HUSH_FANCY_PROMPT=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_MENU=y
-CONFIG_PASSWD_SUM_SHA1=y
-CONFIG_BOOTM_SHOW_TYPE=y
-CONFIG_PARTITION=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
-CONFIG_LONGHELP=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_GO=y
-CONFIG_CMD_LOADB=y
-CONFIG_CMD_RESET=y
-CONFIG_CMD_PARTITION=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_LOADENV=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_UNCOMPRESS=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TFTP=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_LOGIN=y
-CONFIG_CMD_MENU=y
-CONFIG_CMD_MENU_MANAGEMENT=y
-CONFIG_CMD_PASSWD=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIMEOUT=y
-CONFIG_CMD_FLASH=y
-CONFIG_NET=y
-CONFIG_NET_NFS=y
-CONFIG_NET_NETCONSOLE=y
-CONFIG_NET_RESOLV=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_DRIVER_NET_SMC91111=y
-# CONFIG_SPI is not set
-CONFIG_MTD=y
-CONFIG_NAND=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
-CONFIG_MTD_NAND_NOMADIK=y
-CONFIG_FS_CRAMFS=y
-CONFIG_FS_TFTP=y
-CONFIG_DIGEST_SHA256_GENERIC=y
diff --git a/arch/arm/include/asm/debug_ll.h b/arch/arm/include/asm/debug_ll.h
index 43baea2207..0cc3d28662 100644
--- a/arch/arm/include/asm/debug_ll.h
+++ b/arch/arm/include/asm/debug_ll.h
@@ -48,8 +48,6 @@
#include <mach/socfpga/debug_ll.h>
#elif defined CONFIG_ARCH_PXA
#include <mach/pxa/debug_ll.h>
-#elif defined CONFIG_ARCH_NOMADIK
-#include <mach/nomadik/debug_ll.h>
#elif defined CONFIG_ARCH_MXS
#include <mach/mxs/debug_ll.h>
#elif defined CONFIG_ARCH_CLPS711X
diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h
index 259dc9568a..6b446d5185 100644
--- a/arch/arm/include/asm/mach-types.h
+++ b/arch/arm/include/asm/mach-types.h
@@ -101,18 +101,6 @@ extern unsigned int __machine_arch_type;
# define machine_is_csb337() (0)
#endif
-#ifdef CONFIG_MACH_NOMADIK
-# ifdef machine_arch_type
-# undef machine_arch_type
-# define machine_arch_type __machine_arch_type
-# else
-# define machine_arch_type MACH_TYPE_NOMADIK
-# endif
-# define machine_is_nomadik() (machine_arch_type == MACH_TYPE_NOMADIK)
-#else
-# define machine_is_nomadik() (0)
-#endif
-
#ifdef CONFIG_MACH_SCB9328
# ifdef machine_arch_type
# undef machine_arch_type
diff --git a/arch/arm/mach-nomadik/8815.c b/arch/arm/mach-nomadik/8815.c
deleted file mode 100644
index 78b4ed8d5e..0000000000
--- a/arch/arm/mach-nomadik/8815.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnio@xxxxxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- *
- */
-
-#include <common.h>
-#include <init.h>
-#include <linux/clkdev.h>
-#include <mach/nomadik/hardware.h>
-#include <mach/nomadik/board.h>
-#include <asm/armlinux.h>
-#include <asm/mach-types.h>
-#include <linux/amba/bus.h>
-
-#include "clock.h"
-
-static struct clk st8815_clk_48 = {
- .rate = 48 * 1000 * 1000,
-};
-
-static struct clk st8815_clk_2_4 = {
- .rate = 2400000,
-};
-
-static struct clk st8815_dummy;
-
-void st8815_add_device_sdram(u32 size)
-{
- arm_add_mem_device("ram0", 0x00000000, size);
-}
-
-static struct clk_lookup clocks_lookups[] = {
- CLKDEV_CON_ID("apb_pclk", &st8815_dummy),
- CLKDEV_CON_ID("nomadik_mtu", &st8815_clk_2_4),
- CLKDEV_DEV_ID("uart-pl0110", &st8815_clk_48),
- CLKDEV_DEV_ID("uart-pl0111", &st8815_clk_48),
-};
-
-static int st8815_clkdev_init(void)
-{
- clkdev_add_table(clocks_lookups, ARRAY_SIZE(clocks_lookups));
-
- return 0;
-}
-postcore_initcall(st8815_clkdev_init);
-
-void st8815_register_uart(unsigned id)
-{
- resource_size_t start;
-
- switch (id) {
- case 0:
- start = NOMADIK_UART1_BASE;
- break;
- case 1:
- start = NOMADIK_UART1_BASE;
- break;
- }
- amba_apb_device_add(NULL, "uart-pl011", id, start, 4096, NULL, 0);
-}
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
deleted file mode 100644
index 8237779173..0000000000
--- a/arch/arm/mach-nomadik/Kconfig
+++ /dev/null
@@ -1,23 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-if ARCH_NOMADIK
-
-config ARCH_TEXT_BASE
- hex
- default 0x03c00000 if MACH_NOMADIK_8815NHK
-
-choice
- prompt "Nomadik boards"
-
-config MACH_NOMADIK_8815NHK
- bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
- select NOMADIK_8815
- select CLKDEV_LOOKUP
-
-endchoice
-
-config NOMADIK_8815
- bool
- select ARM_AMBA
-
-endif
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
deleted file mode 100644
index 0ab83f61c8..0000000000
--- a/arch/arm/mach-nomadik/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-obj-y += clock.o reset.o timer.o
-obj-y += 8815.o
diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c
deleted file mode 100644
index e68097ade8..0000000000
--- a/arch/arm/mach-nomadik/clock.c
+++ /dev/null
@@ -1,55 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-/*
- * linux/arch/arm/mach-nomadik/clock.c
- *
- * Copyright (C) 2009 Alessandro Rubini
- */
-#include <common.h>
-#include <errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <init.h>
-#include <linux/clkdev.h>
-
-#include "clock.h"
-
-/*
- * The nomadik board uses generic clocks, but the serial pl011 file
- * calls clk_enable(), clk_disable(), clk_get_rate(), so we provide them
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
- return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/* enable and disable do nothing */
-int clk_enable(struct clk *clk)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-/* Create a clock structure with the given name */
-int nmdk_clk_create(struct clk *clk, const char *dev_id)
-{
- struct clk_lookup *clkdev;
-
- clkdev = clkdev_alloc(clk, NULL, dev_id);
- if (!clkdev)
- return -ENOMEM;
- clkdev_add(clkdev);
- return 0;
-}
diff --git a/arch/arm/mach-nomadik/clock.h b/arch/arm/mach-nomadik/clock.h
deleted file mode 100644
index eade4a68ec..0000000000
--- a/arch/arm/mach-nomadik/clock.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * linux/arch/arm/mach-nomadik/clock.h
- *
- * Copyright (C) 2009 Alessandro Rubini
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-struct clk {
- unsigned long rate;
-};
-
-int nmdk_clk_create(struct clk *clk, const char *dev_id);
diff --git a/arch/arm/mach-nomadik/reset.c b/arch/arm/mach-nomadik/reset.c
deleted file mode 100644
index d3d54de07e..0000000000
--- a/arch/arm/mach-nomadik/reset.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * mach-nomadik/include/mach/system.h
- *
- * Copyright (C) 2008 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <common.h>
-#include <init.h>
-#include <io.h>
-#include <restart.h>
-#include <mach/nomadik/hardware.h>
-
-static void __noreturn nomadik_restart_soc(struct restart_handler *rst)
-{
- void __iomem *src_rstsr = (void *)(NOMADIK_SRC_BASE + 0x18);
-
- /* FIXME: use egpio when implemented */
-
- /* Write anything to Reset status register */
- writel(1, src_rstsr);
-
- /* Not reached */
- hang();
-}
-
-static int restart_register_feature(void)
-{
- restart_handler_register_fn("soc", nomadik_restart_soc);
-
- return 0;
-}
-coredevice_initcall(restart_register_feature);
diff --git a/arch/arm/mach-nomadik/timer.c b/arch/arm/mach-nomadik/timer.c
deleted file mode 100644
index 73abbe9b91..0000000000
--- a/arch/arm/mach-nomadik/timer.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * linux/arch/arm/mach-nomadik/timer.c
- *
- * Copyright (C) 2008 STMicroelectronics
- * Copyright (C) 2009 Alessandro Rubini, somewhat based on at91sam926x
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- */
-#include <common.h>
-#include <init.h>
-#include <io.h>
-#include <mach/nomadik/hardware.h>
-
-/* Initial value for SRC control register: all timers use MXTAL/8 source */
-#define SRC_CR_INIT_MASK 0x00007fff
-#define SRC_CR_INIT_VAL 0x2aaa8000
-
-static int st8815_timer_init(void)
-{
- u32 src_cr;
-
- /* Configure timer sources in "system reset controller" ctrl reg */
- src_cr = readl(NOMADIK_SRC_BASE);
- src_cr &= SRC_CR_INIT_MASK;
- src_cr |= SRC_CR_INIT_VAL;
- writel(src_cr, NOMADIK_SRC_BASE);
-
- add_generic_device("nomadik_mtu", DEVICE_ID_SINGLE, NULL, NOMADIK_MTU0_BASE, 0x1000, IORESOURCE_MEM, NULL);
- return 0;
-}
-coredevice_initcall(st8815_timer_init);
diff --git a/include/mach/nomadik/board.h b/include/mach/nomadik/board.h
deleted file mode 100644
index 49004a6825..0000000000
--- a/include/mach/nomadik/board.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnio@xxxxxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- *
- */
-
-#ifndef __ASM_ARCH_BOARD_H
-#define __ASM_ARCH_BOARD_H
-
-void st8815_add_device_sdram(u32 size);
-
-void st8815_register_uart(unsigned id);
-
-#endif
diff --git a/include/mach/nomadik/fsmc.h b/include/mach/nomadik/fsmc.h
deleted file mode 100644
index be0f9569b5..0000000000
--- a/include/mach/nomadik/fsmc.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-/* Definitions for the Nomadik FSMC "Flexible Static Memory controller" */
-
-#ifndef __ASM_ARCH_FSMC_H
-#define __ASM_ARCH_FSMC_H
-
-#include <mach/nomadik/hardware.h>
-/*
- * Register list
- */
-
-/* bus control reg. and bus timing reg. for CS0..CS3 */
-#define FSMC_BCR(x) (NOMADIK_FSMC_VA + (x << 3))
-#define FSMC_BTR(x) (NOMADIK_FSMC_VA + (x << 3) + 0x04)
-
-/* PC-card and NAND:
- * PCR = control register
- * PMEM = memory timing
- * PATT = attribute timing
- * PIO = I/O timing
- * PECCR = ECC result
- */
-#define FSMC_PCR(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x00)
-#define FSMC_PMEM(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x08)
-#define FSMC_PATT(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x0c)
-#define FSMC_PIO(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x10)
-#define FSMC_PECCR(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x14)
-
-#endif /* __ASM_ARCH_FSMC_H */
diff --git a/include/mach/nomadik/hardware.h b/include/mach/nomadik/hardware.h
deleted file mode 100644
index 00b42cd1ff..0000000000
--- a/include/mach/nomadik/hardware.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * This file contains the hardware definitions of the Nomadik.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __MACH_NOMADIK_HARDWARE_H
-#define __MACH_NOMADIK_HARDWARE_H
-
-/* Nomadik registers live from 0x1000.0000 to 0x1023.0000 -- currently */
-#define NOMADIK_IO_VIRTUAL 0xF0000000 /* VA of IO */
-#define NOMADIK_IO_PHYSICAL 0x10000000 /* PA of IO */
-#define NOMADIK_IO_SIZE 0x00300000 /* 3MB for all regs */
-
-#ifndef CONFIG_MMU
-#define io_p2v(x) (x)
-#define io_v2p(x) (x)
-#else
-#define io_p2v(x) ((x) - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
-#define io_v2p(x) ((x) - NOMADIK_IO_VIRTUAL + NOMADIK_IO_PHYSICAL)
-#endif
-
-#define IO_ADDRESS(x) (io_p2v(x)) /* used in asm and more */
-
-/*
- * Base address defination for Nomadik Onchip Logic Block
- */
-#define NOMADIK_FSMC_BASE 0x10100000 /* FSMC registers */
-#define NOMADIK_SDRAMC_BASE 0x10110000 /* SDRAM Controller */
-#define NOMADIK_CLCDC_BASE 0x10120000 /* CLCD Controller */
-#define NOMADIK_MDIF_BASE 0x10120000 /* MDIF */
-#define NOMADIK_DMA0_BASE 0x10130000 /* DMA0 Controller */
-#define NOMADIK_IC_BASE 0x10140000 /* Vectored Irq Controller */
-#define NOMADIK_DMA1_BASE 0x10150000 /* DMA1 Controller */
-#define NOMADIK_USB_BASE 0x10170000 /* USB-OTG conf reg base */
-#define NOMADIK_CRYP_BASE 0x10180000 /* Crypto processor */
-#define NOMADIK_SHA1_BASE 0x10190000 /* SHA-1 Processor */
-#define NOMADIK_XTI_BASE 0x101A0000 /* XTI */
-#define NOMADIK_RNG_BASE 0x101B0000 /* Random number generator */
-#define NOMADIK_SRC_BASE 0x101E0000 /* SRC base */
-#define NOMADIK_WDOG_BASE 0x101E1000 /* Watchdog */
-#define NOMADIK_MTU0_BASE 0x101E2000 /* Multiple Timer 0 */
-#define NOMADIK_MTU1_BASE 0x101E3000 /* Multiple Timer 1 */
-#define NOMADIK_GPIO0_BASE 0x101E4000 /* GPIO0 */
-#define NOMADIK_GPIO1_BASE 0x101E5000 /* GPIO1 */
-#define NOMADIK_GPIO2_BASE 0x101E6000 /* GPIO2 */
-#define NOMADIK_GPIO3_BASE 0x101E7000 /* GPIO3 */
-#define NOMADIK_RTC_BASE 0x101E8000 /* Real Time Clock base */
-#define NOMADIK_PMU_BASE 0x101E9000 /* Power Management Unit */
-#define NOMADIK_OWM_BASE 0x101EA000 /* One wire master */
-#define NOMADIK_SCR_BASE 0x101EF000 /* Secure Control registers */
-#define NOMADIK_MSP2_BASE 0x101F0000 /* MSP 2 interface */
-#define NOMADIK_MSP1_BASE 0x101F1000 /* MSP 1 interface */
-#define NOMADIK_UART2_BASE 0x101F2000 /* UART 2 interface */
-#define NOMADIK_SSIRx_BASE 0x101F3000 /* SSI 8-ch rx interface */
-#define NOMADIK_SSITx_BASE 0x101F4000 /* SSI 8-ch tx interface */
-#define NOMADIK_MSHC_BASE 0x101F5000 /* Memory Stick(Pro) Host */
-#define NOMADIK_SDI_BASE 0x101F6000 /* SD-card/MM-Card */
-#define NOMADIK_I2C1_BASE 0x101F7000 /* I2C1 interface */
-#define NOMADIK_I2C0_BASE 0x101F8000 /* I2C0 interface */
-#define NOMADIK_MSP0_BASE 0x101F9000 /* MSP 0 interface */
-#define NOMADIK_FIRDA_BASE 0x101FA000 /* FIrDA interface */
-#define NOMADIK_UART1_BASE 0x101FB000 /* UART 1 interface */
-#define NOMADIK_SSP_BASE 0x101FC000 /* SSP interface */
-#define NOMADIK_UART0_BASE 0x101FD000 /* UART 0 interface */
-#define NOMADIK_SGA_BASE 0x101FE000 /* SGA interface */
-#define NOMADIK_L2CC_BASE 0x10210000 /* L2 Cache controller */
-
-/* Other ranges, not for p2v/v2p */
-#define NOMADIK_BACKUP_RAM 0x80010000
-#define NOMADIK_EBROM 0x80000000 /* Embedded boot ROM */
-#define NOMADIK_HAMACV_DMEM_BASE 0xA0100000 /* HAMACV Data Memory Start */
-#define NOMADIK_HAMACV_DMEM_END 0xA01FFFFF /* HAMACV Data Memory End */
-#define NOMADIK_HAMACA_DMEM 0xA0200000 /* HAMACA Data Memory Space */
-
-#define NOMADIK_FSMC_VA IO_ADDRESS(NOMADIK_FSMC_BASE)
-#define NOMADIK_MTU0_VA IO_ADDRESS(NOMADIK_MTU0_BASE)
-#define NOMADIK_MTU1_VA IO_ADDRESS(NOMADIK_MTU1_BASE)
-
-#endif /* __MACH_NOMADIK_HARDWARE_H */
diff --git a/include/mach/nomadik/nand.h b/include/mach/nomadik/nand.h
deleted file mode 100644
index 419db3e33c..0000000000
--- a/include/mach/nomadik/nand.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#ifndef __ASM_ARCH_NAND_H
-#define __ASM_ARCH_NAND_H
-
-struct nomadik_nand_platform_data {
- int options;
- int (*init) (void);
-};
-
-#define NAND_IO_DATA 0x40000000
-#define NAND_IO_CMD 0x40800000
-#define NAND_IO_ADDR 0x41000000
-
-#endif /* __ASM_ARCH_NAND_H */
--
2.39.2
