When running the i.MX8MP in nominal drive mode, a number of clocks are validated only up to 600MHz: m7_core, audio_axi, vpu_bus, gpu_axi, noc_io, vpu_g1. Let's configure PLL3 as 600MHz to make it a suitable parent for these clocks. The upstream Linux DTs don't yet use PLL3, but this aligns us with U-Boot's boot-time configuration. While at it, we also add a comment about how pll1 and pll2 are configured. Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> --- arch/arm/mach-imx/imx8m.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-imx/imx8m.c b/arch/arm/mach-imx/imx8m.c index d798c52c6a6e..211b4f782199 100644 --- a/arch/arm/mach-imx/imx8m.c +++ b/arch/arm/mach-imx/imx8m.c @@ -77,6 +77,13 @@ static void __imx8m_early_clock_init(int cpu_type) imx8m_ccgr_clock_enable(IMX8M_CCM_CCGR_DDR1); + /* + * The gate is not exported to clk tree, so configure them here. + * According to ANAMIX SPEC + * sys pll1 fixed at 800MHz + * sys pll2 fixed at 1GHz + * Here we only enable the outputs. + */ val = readl(ana + IMX8MM_CCM_ANALOG_SYS_PLL1_GEN_CTRL); val |= INTPLL_CLKE_MASK | INTPLL_DIV2_CLKE_MASK | INTPLL_DIV3_CLKE_MASK | INTPLL_DIV4_CLKE_MASK | @@ -100,7 +107,7 @@ static void __imx8m_early_clock_init(int cpu_type) IMX8M_CCM_TARGET_ROOTn_MUX(3)); imx8m_ccgr_clock_enable(IMX8M_CCM_CCGR_GIC); - if (cpu_type == IMX_CPU_IMX8MN) + if (cpu_type == IMX_CPU_IMX8MN || cpu_type == IMX_CPU_IMX8MP) pll3_freq = 600000000UL; else pll3_freq = 750000000UL; -- 2.39.2
