On Mon, 15 Apr 2024 07:27:34 +0200, Ahmad Fatoum wrote:
> A MMC may support HS200 in theory, but it's unusable due to I/O
> voltage. Unlike Linux, barebox doesn't check the I/O voltage, so it
> will attempt enabling HS200 and get told no by the card.
>
> This no currently triggered a failure of the probe:
>
> mmc1: detected MMC card version 5.0
> ERROR: mmc1: mmc_select_hs200 failed, error -5
> WARNING: mmc1: Card's startup fails with -5
> Cannot set parameter mmc1.probe: I/O error
>
> [...]
Applied, thanks!
[1/1] mci: core: don't fail MMC probe if HS200 isn't supported in HW
https://git.pengutronix.de/cgit/barebox/commit/?id=75d6a1ce692d (link may not be stable)
Best regards,
--
Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
