On Mon, 18 Mar 2024 11:18:14 +0100, Steffen Trumtrar wrote:
> This series adds support for HS200 mode to mci-core and sdhci.
> As the host driver also needs to handle clock setup, pin control and
> host specific tuning, this series only adds HS200 support to the Arasan
> SDHCI driver.
>
> Tested on: ZynqMP
> Compile tested: for ZynqMP with/without CONFIG_MCI_TUNING
>
> [...]
Applied, thanks!
[01/15] mci: arasan: fix dma support
https://git.pengutronix.de/cgit/barebox/commit/?id=a6d9e82f515a (link may not be stable)
[02/15] ARM: zynqmp: add sd_dll_reset call
https://git.pengutronix.de/cgit/barebox/commit/?id=54a4e53cc859 (link may not be stable)
[03/15] zynqmp: firmware: add functions to set tap delay
https://git.pengutronix.de/cgit/barebox/commit/?id=d26f2505c399 (link may not be stable)
[04/15] mci: arasan: implement 25MHz quirk for zynqmp
https://git.pengutronix.de/cgit/barebox/commit/?id=6d0980c89783 (link may not be stable)
[05/15] include: mci: sync mci_timing with linux
https://git.pengutronix.de/cgit/barebox/commit/?id=312fe15bc734 (link may not be stable)
[06/15] mci: arasan: read clk phases from DT
https://git.pengutronix.de/cgit/barebox/commit/?id=3455c97f5841 (link may not be stable)
[07/15] mci: core: save the set clock as actual_clock
https://git.pengutronix.de/cgit/barebox/commit/?id=8b8c5b0e39a3 (link may not be stable)
[08/15] mci: arasan: register sdcard/sampleclk
https://git.pengutronix.de/cgit/barebox/commit/?id=82d92eff1be3 (link may not be stable)
[09/15] include: mci: add more EXT_CSD_CARD_TYPE_*
https://git.pengutronix.de/cgit/barebox/commit/?id=7dfc146ffa24 (link may not be stable)
[10/15] mci: core: parse more host capabilities from DT
https://git.pengutronix.de/cgit/barebox/commit/?id=b8ebb6ec0f94 (link may not be stable)
[11/15] mci: mci-core: add HS200 support
https://git.pengutronix.de/cgit/barebox/commit/?id=ffa59e16bb96 (link may not be stable)
[12/15] mci: mci-core: replace value with define
https://git.pengutronix.de/cgit/barebox/commit/?id=aaafc8f241e2 (link may not be stable)
[13/15] mci: sdhci: add tuning support
https://git.pengutronix.de/cgit/barebox/commit/?id=c45f2eb6451a (link may not be stable)
[14/15] mci: arasan-sdhci: add HS200 tuning support on ZynqMP
https://git.pengutronix.de/cgit/barebox/commit/?id=94d79ed7b781 (link may not be stable)
[15/15] mci: sdhci: replace sdhci_wait_idle
https://git.pengutronix.de/cgit/barebox/commit/?id=6c809314ab88 (link may not be stable)
Best regards,
--
Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
