barebox is meant to boot from SD-Card on this platform, so support a barebox environment in this case for easier handling. Reviewed-by: Sam Ravnborg <sam@xxxxxxxxxxxx> Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> --- arch/arm/boards/skov-arm9cpu/board.c | 8 ++++++++ arch/arm/dts/at91-skov-arm9cpu.dts | 6 ++++++ 2 files changed, 14 insertions(+) diff --git a/arch/arm/boards/skov-arm9cpu/board.c b/arch/arm/boards/skov-arm9cpu/board.c index db6813c0e726..20507922cb24 100644 --- a/arch/arm/boards/skov-arm9cpu/board.c +++ b/arch/arm/boards/skov-arm9cpu/board.c @@ -7,6 +7,7 @@ #include <envfs.h> #include <init.h> #include <gpio.h> +#include <bootsource.h> #include <linux/sizes.h> @@ -70,6 +71,13 @@ static int skov_arm9_probe(struct device *dev) mem = mem / SZ_1M; globalvar_add_simple_int("board.mem", &mem, "%u"); + /* + * NOR first stage bootloader is at91bootstrap, so if we find traces + * of barebox in on-chip SRAM, it must mean we have booted from SD + */ + if (is_barebox_arm_head((void *)AT91SAM9263_SRAM0_BASE)) + bootsource_set_raw(BOOTSOURCE_MMC, BOOTSOURCE_INSTANCE_UNKNOWN); + return 0; } diff --git a/arch/arm/dts/at91-skov-arm9cpu.dts b/arch/arm/dts/at91-skov-arm9cpu.dts index ac1d5c0c2e6e..d04d031f4053 100644 --- a/arch/arm/dts/at91-skov-arm9cpu.dts +++ b/arch/arm/dts/at91-skov-arm9cpu.dts @@ -16,6 +16,12 @@ / { chosen { stdout-path = "serial0:115200n8"; + + environment-sd { + compatible = "barebox,environment"; + device-path = &mmc1; + file-path = "barebox.env"; + }; }; flash: nor_flash@10000000 { -- 2.39.2