barebox is meant to boot from SD-Card on this platform, so support a
barebox environment in this case for easier handling.
Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
---
v3:
- new patch
---
arch/arm/boards/skov-arm9cpu/board.c | 8 ++++++++
arch/arm/dts/at91-skov-arm9cpu.dts | 6 ++++++
2 files changed, 14 insertions(+)
diff --git a/arch/arm/boards/skov-arm9cpu/board.c b/arch/arm/boards/skov-arm9cpu/board.c
index db6813c0e726..20507922cb24 100644
--- a/arch/arm/boards/skov-arm9cpu/board.c
+++ b/arch/arm/boards/skov-arm9cpu/board.c
@@ -7,6 +7,7 @@
#include <envfs.h>
#include <init.h>
#include <gpio.h>
+#include <bootsource.h>
#include <linux/sizes.h>
@@ -70,6 +71,13 @@ static int skov_arm9_probe(struct device *dev)
mem = mem / SZ_1M;
globalvar_add_simple_int("board.mem", &mem, "%u");
+ /*
+ * NOR first stage bootloader is at91bootstrap, so if we find traces
+ * of barebox in on-chip SRAM, it must mean we have booted from SD
+ */
+ if (is_barebox_arm_head((void *)AT91SAM9263_SRAM0_BASE))
+ bootsource_set_raw(BOOTSOURCE_MMC, BOOTSOURCE_INSTANCE_UNKNOWN);
+
return 0;
}
diff --git a/arch/arm/dts/at91-skov-arm9cpu.dts b/arch/arm/dts/at91-skov-arm9cpu.dts
index ac1d5c0c2e6e..d04d031f4053 100644
--- a/arch/arm/dts/at91-skov-arm9cpu.dts
+++ b/arch/arm/dts/at91-skov-arm9cpu.dts
@@ -16,6 +16,12 @@ / {
chosen {
stdout-path = "serial0:115200n8";
+
+ environment-sd {
+ compatible = "barebox,environment";
+ device-path = &mmc1;
+ file-path = "barebox.env";
+ };
};
flash: nor_flash@10000000 {
--
2.39.2
