The current code checks only if "/firmware/optee" exist on the builtin
dtb and applys the fixup if not found and if found nothing is done. If a
builtin dts contains the node but an external don't the fixup won't be
applied. Also if the external dts does have a node + the reserved memory
region nodes but the barebox builtin dts don't we do add additional
reserved memory nodes which may conflict due to different name scheme:
<name> vs. <name>@<addr>.
Move the "/firmware/optee" check into the of_optee_fixup() so the check
is done on the correct dtb root nodes.
Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
---
arch/arm/mach-imx/imx8m.c | 3 +--
drivers/tee/optee/of.c | 6 +++++-
2 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-imx/imx8m.c b/arch/arm/mach-imx/imx8m.c
index 6f8574199113..03d6e7f64cde 100644
--- a/arch/arm/mach-imx/imx8m.c
+++ b/arch/arm/mach-imx/imx8m.c
@@ -67,8 +67,7 @@ static int imx8m_init(const char *cputypestr)
imx_set_reset_reason(src + IMX7_SRC_SRSR, imx7_reset_reasons);
pr_info("%s unique ID: %llx\n", cputypestr, imx8m_uid());
- if (IS_ENABLED(CONFIG_PBL_OPTEE) && tzc380_is_enabled() &&
- !of_find_node_by_path_from(NULL, "/firmware/optee")) {
+ if (IS_ENABLED(CONFIG_PBL_OPTEE) && tzc380_is_enabled()) {
static struct of_optee_fixup_data optee_fixup_data = {
.shm_size = CONFIG_OPTEE_SHM_SIZE,
.method = "smc",
diff --git a/drivers/tee/optee/of.c b/drivers/tee/optee/of.c
index cdf650592e90..2ff1f01964c8 100644
--- a/drivers/tee/optee/of.c
+++ b/drivers/tee/optee/of.c
@@ -9,12 +9,16 @@
int of_optee_fixup(struct device_node *root, void *_data)
{
struct of_optee_fixup_data *fixup_data = _data;
+ const char *optee_of_path = "/firmware/optee";
struct resource res = {};
struct device_node *node;
u64 optee_membase;
int ret;
- node = of_create_node(root, "/firmware/optee");
+ if (of_find_node_by_path_from(NULL, optee_of_path))
+ return 0;
+
+ node = of_create_node(root, optee_of_path);
if (!node)
return -ENOMEM;
--
2.39.2
