On Wed, Dec 20, 2023 at 11:47:39AM +0100, Bastian Krause wrote:
> Add a common PMIC read function to PBL which allows easy porting of
> U-Boot's pmic_reg_read() in lowlevel board code.
>
> Signed-off-by: Bastian Krause <bst@xxxxxxxxxxxxxx>
> ---
> Changes since (implicit) v1:
> - make function static inline as suggested by Ahmad
> - change void *buf to u32 *val to resemble's U-Boot's pmic_reg_read() as
> suggested by Ahmad
> ---
> include/pbl/pmic.h | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/include/pbl/pmic.h b/include/pbl/pmic.h
> index 0f882c5649d..4eeee31d46c 100644
> --- a/include/pbl/pmic.h
> +++ b/include/pbl/pmic.h
> @@ -9,6 +9,30 @@ struct pmic_config {
> u8 val;
> };
>
> +static inline void pmic_reg_read(struct pbl_i2c *i2c, int addr, u8 reg, u32 *val)
I didn't notice there is a v2 when replying to v1, so here again:
Why not make *val a u8 *?
Sascha
> +{
> + int ret;
> + u8 buf[1];
> + struct i2c_msg msg[] = {
> + {
> + .addr = addr,
> + .buf = ®,
> + .len = 1,
> + }, {
> + .addr = addr,
> + .flags = I2C_M_RD,
> + .buf = buf,
> + .len = 1,
> + },
> + };
> +
> + ret = pbl_i2c_xfer(i2c, msg, ARRAY_SIZE(msg));
> + if (ret != ARRAY_SIZE(msg))
> + pr_err("Failed to read from pmic@%x: %d\n", addr, ret);
> +
> + *val = buf[0];
> +}
> +
> static void pmic_reg_write(struct pbl_i2c *i2c, int addr, u8 reg, u8 val)
> {
> int ret;
> --
> 2.39.2
>
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
