[PATCH] i2c: add pmic_reg_read() for PBL use

[Bastian Krause <bst@xxxxxxxxxxxxxx>]

Add a common PMIC read function to PBL which allows easy porting of
U-Boot's pmic_reg_read() in lowlevel board code.

Signed-off-by: Bastian Krause <bst@xxxxxxxxxxxxxx>
---
 include/pbl/pmic.h | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/include/pbl/pmic.h b/include/pbl/pmic.h
index 0f882c5649d..bd0583370ec 100644
--- a/include/pbl/pmic.h
+++ b/include/pbl/pmic.h
@@ -9,6 +9,27 @@ struct pmic_config {
 	u8 val;
 };
 
+static void pmic_reg_read(struct pbl_i2c *i2c, int addr, u8 reg, void *buf)
+{
+	int ret;
+	struct i2c_msg msg[] = {
+		{
+			.addr = addr,
+			.buf = &reg,
+			.len = 1,
+		}, {
+			.addr = addr,
+			.flags = I2C_M_RD,
+			.buf = buf,
+			.len = 1,
+		},
+	};
+
+	ret = pbl_i2c_xfer(i2c, msg, ARRAY_SIZE(msg));
+	if (ret != ARRAY_SIZE(msg))
+		pr_err("Failed to read from pmic@%x: %d\n", addr, ret);
+}
+
 static void pmic_reg_write(struct pbl_i2c *i2c, int addr, u8 reg, u8 val)
 {
 	int ret;
-- 
2.39.2