On Mon, Nov 27, 2023 at 07:40:28AM +0100, Ahmad Fatoum wrote: > STM32MP15 in trusted mode and STM32MP13 by default use OP-TEE as secure > monitor and some resets, clocks and voltage regulators are off-limits > to the normal world. > > This series syncs barebox SCMI support with v6.6 and adds OP-TEE as > transport alongside SMCCC. This series has been tested on: > > - STM32MP15 + OP-TEE + OP-TEE shm > - STM32MP13 + OP-TEE + OP-TEE shm > - STM32MP15 + OP-TEE + CFG_STM32MP1_SCMI_SIP > - STM32MP15 + TF-A as SCMI provider (no OP-TEE) > > This series depends on the OP-TEE infrastructure added in > <M20231127063559.2205776-1-a.fatoum@xxxxxxxxxxxxxx> > > Ahmad Fatoum (6): > firmware: arm_scmi: sync with Linux v6.6 > ARM: dts: stm32mp: dk1/2: build SCMI-enabled device tree > nvmem: bsec: add support for STM32 bsec pseudo TA > ARM: dts: stm32mp: ev1: build extra device tree with SCMI > ARM: dts: stm32mp: add dtsi for SMC SiP-based SCMI > ARM: dts: stm32mp: lxa-mc1: build SCMI-enabled DT Applied, thanks Sascha > > arch/arm/dts/Makefile | 7 +- > arch/arm/dts/stm32mp1-scmi-smc.dtsi | 49 + > arch/arm/dts/stm32mp157a-dk1-scmi.dts | 4 + > arch/arm/dts/stm32mp157c-dk2-scmi.dts | 4 + > arch/arm/dts/stm32mp157c-ev1-scmi.dts | 20 + > arch/arm/dts/stm32mp157c-lxa-mc1-scmi.dts | 63 + > drivers/clk/clk-scmi.c | 100 +- > drivers/firmware/Kconfig | 12 +- > drivers/firmware/arm_scmi/Kconfig | 86 + > drivers/firmware/arm_scmi/Makefile | 18 +- > drivers/firmware/arm_scmi/base.c | 85 +- > drivers/firmware/arm_scmi/bus.c | 356 ++++- > drivers/firmware/arm_scmi/clock.c | 292 ++-- > drivers/firmware/arm_scmi/common.h | 315 ++-- > drivers/firmware/arm_scmi/driver.c | 1668 +++++++++++++------- > drivers/firmware/arm_scmi/msg.c | 93 ++ > drivers/firmware/arm_scmi/optee.c | 614 +++++++ > drivers/firmware/arm_scmi/power.c | 229 +++ > drivers/firmware/arm_scmi/protocols.h | 325 ++++ > drivers/firmware/arm_scmi/reset.c | 67 +- > drivers/firmware/arm_scmi/scmi_pm_domain.c | 135 ++ > drivers/firmware/arm_scmi/sensors.c | 936 +++++++++++ > drivers/firmware/arm_scmi/shmem.c | 53 +- > drivers/firmware/arm_scmi/smc.c | 86 +- > drivers/firmware/arm_scmi/voltage.c | 204 ++- > drivers/nvmem/Kconfig | 6 + > drivers/nvmem/Makefile | 1 + > drivers/nvmem/bsec.c | 133 +- > drivers/nvmem/stm32-bsec-optee-ta.c | 298 ++++ > drivers/nvmem/stm32-bsec-optee-ta.h | 85 + > drivers/regulator/scmi-regulator.c | 13 +- > drivers/reset/reset-scmi.c | 2 +- > include/linux/scmi_protocol.h | 94 +- > 33 files changed, 5216 insertions(+), 1237 deletions(-) > create mode 100644 arch/arm/dts/stm32mp1-scmi-smc.dtsi > create mode 100644 arch/arm/dts/stm32mp157a-dk1-scmi.dts > create mode 100644 arch/arm/dts/stm32mp157c-dk2-scmi.dts > create mode 100644 arch/arm/dts/stm32mp157c-ev1-scmi.dts > create mode 100644 arch/arm/dts/stm32mp157c-lxa-mc1-scmi.dts > create mode 100644 drivers/firmware/arm_scmi/Kconfig > create mode 100644 drivers/firmware/arm_scmi/msg.c > create mode 100644 drivers/firmware/arm_scmi/optee.c > create mode 100644 drivers/firmware/arm_scmi/power.c > create mode 100644 drivers/firmware/arm_scmi/protocols.h > create mode 100644 drivers/firmware/arm_scmi/scmi_pm_domain.c > create mode 100644 drivers/firmware/arm_scmi/sensors.c > create mode 100644 drivers/nvmem/stm32-bsec-optee-ta.c > create mode 100644 drivers/nvmem/stm32-bsec-optee-ta.h > > -- > 2.39.2 > > > -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
