Hi Roland, On Tue, Nov 21 2023 at 17:20 +0100, Roland Hieber <rhi@xxxxxxxxxxxxxx> wrote: > The default-on trigger has been supported in barebox since commit > 767c6b4a814a2a000f3b (2014-02-28, Sascha Hauer: "led: Add default-on > trigger"). > > Signed-off-by: Roland Hieber <rhi@xxxxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/leds/common.rst | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/leds/common.rst b/Documentation/devicetree/bindings/leds/common.rst > index 09b4e401bc2c..ad94ceb506b1 100644 > --- a/Documentation/devicetree/bindings/leds/common.rst > +++ b/Documentation/devicetree/bindings/leds/common.rst > @@ -9,6 +9,7 @@ Common leds properties > * ``net`` - LED indicates network activity (tx and rx) > * ``net-rx`` - LED indicates network activity (rx only) > * ``net-tx`` - LED indicates network activity (tx only) > + * ``default-on`` – LED is switched on by default the lines before utilize the character '-' while in your new line a '–' is used. I think this should be consistent in one or the other direction. Best regards Ulrich > * ``label``: The label for this LED. If omitted, the label is taken > from the node name (excluding the unit address). -- Pengutronix e.K. | Ulrich Ölmann | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
