On Mon, Nov 13, 2023 at 10:04:38AM +0100, Marco Felsch wrote:
> Without the proper aligned image size we may encounter host load errors
> like:
>
> | found i.MX8MP USB device [1fc9:0146]
> | No dcd table in this ivt
> | dl_command err=-1, last_trans=-1
> | 4 in err=-4, last_trans=0 00 00 00 00
>
> The reason for this is that we asked only for the required bytes while
> the host tries to send the complete image which may contain alignment
> bytes at the end.
>
> Fix this by request always 4K aligned sizes.
As discussed in mumble: This fix is not correct. It works with HABv4
enabled images, but not on images without HAB support.
Sascha
>
> Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
> ---
> arch/arm/mach-imx/romapi.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/mach-imx/romapi.c b/arch/arm/mach-imx/romapi.c
> index 1b1800f1e000..b4c63e4d7274 100644
> --- a/arch/arm/mach-imx/romapi.c
> +++ b/arch/arm/mach-imx/romapi.c
> @@ -6,6 +6,7 @@
> #include <linux/bitfield.h>
> #include <soc/imx9/flash_header.h>
> #include <asm/sections.h>
> +#include <linux/sizes.h>
> #include <mach/imx/romapi.h>
> #include <mach/imx/atf.h>
> #include <mach/imx/imx8m-regs.h>
> @@ -50,6 +51,12 @@ static int imx_bootrom_query(struct rom_api *rom_api, uint32_t type, uint32_t *_
>
> static int imx_romapi_load_stream(struct rom_api *rom_api, void *adr, size_t size)
> {
> + /*
> + * The imx-image tool align the final image size to 4K so we need to
> + * take this into account.
> + */
> + size = ALIGN(size, SZ_4K);
> +
> while (size) {
> size_t chunksize = min(size, (size_t)1024);
> int ret;
> --
> 2.39.2
>
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
