On Thu, Nov 02, 2023 at 03:12:25PM +0100, Ahmad Fatoum wrote: > Hello Sascha, > > On 03.08.23 12:49, Sascha Hauer wrote: > > This series adds initial basic support for the TI K3 Architecture. > > Currently only the AM62x is supported and within there the BeaglePlay > > board (https://www.beagleboard.org/boards/beagleplay). > > > > The current support is enough for bringing up barebox 2nd stage after > > U-Boot has initialized the SoC. The SoC boots from a FAT partition on > > SD/eMMC, the u-boot.img therein can be replaced with a barebox image. > > > > The SoC has a core dedicated to handle clocks, power domains and other > > stuff. Communication to this core is done with a mailbox interface and > > this series contains patches to implement that interface based on that > > a clk driver and a power domain driver. > > > > So far only SD/eMMC is working, so there's plenty of room to add further > > support for networking, USB, SPI and I2C. It's a start. > > let's merge this? OMG, I completely forgot about this. Just merged it. Sascha -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
