On Fri, Oct 20, 2023 at 02:17:10PM +0200, Ahmad Fatoum wrote: > On i.MX8M(Q/M/N/P), barebox PBL is loaded 0x1000 bytes into ITCM > at address 0x7e00_1000. ITCM is 128K followed by 128K of DTCM. > > Therefore, in total, barebox PBL may not exceed 0x3f000. Now that we > have a common macro for defining boards, let's add a > MAX_PBL_MEMORY_SIZE_$(entrypoint) into it, so check that we don't > exceed this size at runtime. > > Boards that trip over this, should consider using get_builtin_firmware_ext > to offload binaries into barebox proper. > > Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> > --- > images/Makefile.imx | 1 + > 1 file changed, 1 insertion(+) Applied, thanks Sascha > > diff --git a/images/Makefile.imx b/images/Makefile.imx > index 50f0a64b3091..ca09853c4b6e 100644 > --- a/images/Makefile.imx > +++ b/images/Makefile.imx > @@ -26,6 +26,7 @@ $(eval > ifeq ($($(strip $(1))), y) > pblb-y += $(strip $(2)) > CFG_$(strip $(2)).pblb.imximg = $(board)/$(strip $(3)).imxcfg > + MAX_PBL_MEMORY_SIZE_$(strip $(2)) = 0x3f000 > FILE_barebox-$(strip $(4)).img = $(strip $(2)).pblb.pimximg > FILE_barebox-$(strip $(4))-s.img = $(strip $(2)).pblb.psimximg > image-y += barebox-$(strip $(4)).img > -- > 2.39.2 > > > -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
