Document the FlexSPI image and boot feature to make it easier for users to enable the support. Also document the image layout since it became more complex with FlexSPI and HAB, so a detailed overview is very helpful. Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx> --- Documentation/boards/imx.rst | 77 ++++++++++++++++++++++++++++++++++++ 1 file changed, 77 insertions(+) diff --git a/Documentation/boards/imx.rst b/Documentation/boards/imx.rst index a8f014dd1b91..1b34c12cf4c6 100644 --- a/Documentation/boards/imx.rst +++ b/Documentation/boards/imx.rst @@ -394,6 +394,83 @@ with only the image name as argument: scripts/imx/imx-usb-loader images/barebox-freescale-imx51-babbage.img +FlexSPI Boot +^^^^^^^^^^^^ + +FlexSPI boot is currently supported on: i.MX8MM, i.MX8MN and i.MX8MP. + +To generate FlexSPI/QSPI image(s) the board flash header file must specify: +``flexspi_ivtofs`` and ``flexspi_fcfbofs``. + +It is recommended to do this via the ``include/mach/imx/flexspi-imx8m*-cfg.h`` +header files due to HAB boot. In this case ``CONFIG_SPI_NXP_FLEXSPI`` must be +enabled too + +.. code-block:: none + + #include <mach/imx/flexspi-imx8mp-cfg.h> + +There are two different headers, one for the i.MX8MM and one for the i.MX8MP/N. +It's important to use the correct one because the BootROM expects the IVT and +flash configuration block (FCB) on different offsets. + +Barebox doesn't generate a separate FlexSPI image instead the same image used +for SD/MMC/USB is extended to support FlexSPI boot. This is done by adding a 2nd +IVT header and the required FCB at the required boot offsets. + +The FlexSPI boot(-image) also supports `High Assurance Boot`_ if enabled. A fully +featured image with FlexSPI and HAB support for an i.MX8MM looks like:: + + 0x0 +------------------------------------------+ + | Barebox Header | + header_gap +------------------------------------------+ + | FlexSPI Flash Configuration Block (FCFB) | + header_gap + 0x400 +------------------------------------------+ --- + | i.MX MMC/SD/USB IVT Header | | + | Boot Data +--. | + | CSF Pointer +--|--. | + header_gap + 0x1000 +------------------------------------------+ | | --- | + | i.MX FlexSPI IVT Header | | | | | Signed Area + | Boot Data +--+ | | | MMC/SD/ + | CSF Pointer +--|--|--. | Signed Area | USB + header_gap + 0x2000 +------------------------------------------+ | | | | FlexSPI | + | Barebox Prebootloader (PBL) |<-´ | | | | + | Piggydata Hash (SHA256) | | | | | + +------------------------------------------+ | | --- --- + | Command Sequence File (CSF) Slot-0 |<----´ | + +------------------------------------------+ | + | Command Sequence File (CSF) Slot-1 |<-------´ + +------------------------------------------+ --- + | Piggydata (Main Barebox Binary) | | Hashed Area + +------------------------------------------+ --- + +For i.MX8MP/N devices the image does differ slightly due to different offsets:: + + 0x0 +------------------------------------------+ + | Barebox Header | + header_gap +------------------------------------------+ --- + | i.MX MMC/SD/USB IVT Header | | + | Boot Data +--. | + | CSF Pointer +--|--. | + header_gap + 0x400 +------------------------------------------+ | | | + | FlexSPI Flash Configuration Block (FCFB) | | | | Signed Area + header_gap + 0x1000 +------------------------------------------+ | | --- | MMC/SD/ + | i.MX FlexSPI IVT Header | | | | | USB + | Boot Data +--+ | | | + | CSF Pointer +--|--|--. | Signed Area | + header_gap + 0x2000 +------------------------------------------+ | | | | FlexSPI | + | Barebox Prebootloader (PBL) |<-´ | | | | + | Piggydata Hash (SHA256) | | | | | + +------------------------------------------+ | | --- --- + | Command Sequence File (CSF) Slot-0 |<----´ | + +------------------------------------------+ | + | Command Sequence File (CSF) Slot-1 |<-------´ + +------------------------------------------+ --- + | Piggydata (Main Barebox Binary) | | Hashed Area + +------------------------------------------+ --- + +At the moment ``header_gap`` is always 32K for all supported devices. + External Boot Mode ------------------ -- 2.39.2
