Re: [PATCH 1/2] raspi: support to read vc values via dt-2nd boot

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02.08.23 12:49, Denis Osterland-Heim wrote:
> From: Denis OSTERLAND-HEIM <denis.osterland@xxxxxxxxx>
> 
> In case of boot via dt-2nd pbl does not copy dtb, because it is not
> executed. With this patch the values were read and registered as
> fix-ups. It also adds a inif function that only fix-ups the ethernet
> MAC address.
> 
> Signed-off-by: Denis OSTERLAND-HEIM <denis.osterland@xxxxxxxxx>

Acked-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>

> ---
>  arch/arm/boards/raspberry-pi/rpi-common.c | 32 ++++++++++++++---------
>  1 file changed, 20 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/arm/boards/raspberry-pi/rpi-common.c
> b/arch/arm/boards/raspberry-pi/rpi-common.c
> index 56e7eebd61..2f525e7d70 100644
> --- a/arch/arm/boards/raspberry-pi/rpi-common.c
> +++ b/arch/arm/boards/raspberry-pi/rpi-common.c
> @@ -110,6 +110,12 @@ static void rpi_add_led(void)
>                 led_set_trigger(LED_TRIGGER_HEARTBEAT, &l->led);
>  }
>  
> +static int rpi_eth_init(struct rpi_priv *priv)
> +{
> +       rpi_set_usbethaddr();
> +       return 0;
> +}
> +
>  static int rpi_b_init(struct rpi_priv *priv)
>  {
>         rpi_leds[0].gpio = 16;
> @@ -276,16 +282,12 @@ static u32 rpi_boot_mode, rpi_boot_part;
>   * Some parameters are defined here:
>   *
> https://www.raspberrypi.com/documentation/computers/configuration.html#part4
>   */
> -static void rpi_vc_fdt_parse(void *fdt)
> +static void rpi_vc_fdt_parse(struct device_node *root)
>  {
>         int ret;
> -       struct device_node *root, *chosen, *bootloader, *memory;
> +       struct device_node *chosen, *bootloader, *memory;
>         char *str;
>  
> -       root = of_unflatten_dtb(fdt, INT_MAX);
> -       if (IS_ERR(root))
> -               return;
> -
>         str = of_read_vc_string(root, "serial-number");
>         if (str) {
>                 barebox_set_serial_number(str);
> @@ -363,7 +365,7 @@ static void rpi_vc_fdt_parse(void *fdt)
>         return;
>  }
>  
> -static void rpi_vc_fdt(void)
> +static struct device_node *rpi_vc_fdt(void)
>  {
>         void *saved_vc_fdt;
>         struct fdt_header *oftree;
> @@ -379,17 +381,17 @@ static void rpi_vc_fdt(void)
>                 if (oftree->totalsize)
>                         pr_err("there was an error copying fdt in pbl:
> %d\n",
>                                         be32_to_cpu(oftree-
>> totalsize));
> -               return;
> +               return ERR_PTR(-EINVAL);
>         }
>  
>         if (magic != FDT_MAGIC)
> -               return;
> +               return ERR_PTR(-EINVAL);
>  
>         size = be32_to_cpu(oftree->totalsize);
>         if (write_file("/vc.dtb", saved_vc_fdt, size))
>                 pr_err("failed to save videocore fdt to a file\n");
> -
> -       rpi_vc_fdt_parse(saved_vc_fdt);
> +       
> +       return of_unflatten_dtb(saved_vc_fdt, INT_MAX);
>  }
>  
>  static void rpi_set_kernel_name(void) {
> @@ -452,6 +454,7 @@ static int rpi_devices_probe(struct device *dev)
>         const struct rpi_machine_data *dcfg;
>         struct regulator *reg;
>         struct rpi_priv *priv;
> +       struct device_node *root;
>         const char *name, *ptr;
>         char *hostname;
>         int ret;
> @@ -480,7 +483,8 @@ static int rpi_devices_probe(struct device *dev)
>         bcm2835_register_fb();
>         armlinux_set_architecture(MACH_TYPE_BCM2708);
>         rpi_env_init();
> -       rpi_vc_fdt();
> +       root = rpi_vc_fdt();
> +       rpi_vc_fdt_parse(IS_ERR(root) ? priv->dev->device_node : root);
>         rpi_set_kernel_name();
>  
>         if (dcfg && dcfg->init)
> @@ -599,6 +603,7 @@ static const struct rpi_machine_data rpi_3_ids[] =
> {
>                 .init = rpi_b_plus_init,
>         }, {
>                 .hw_id = BCM2837_BOARD_REV_CM3,
> +               .init = rpi_eth_init,
>         }, {
>                 .hw_id = BCM2837B0_BOARD_REV_CM3_PLUS,
>         }, {
> @@ -611,10 +616,13 @@ static const struct rpi_machine_data rpi_3_ids[]
> = {
>  static const struct rpi_machine_data rpi_4_ids[] = {
>         {
>                 .hw_id = BCM2711_BOARD_REV_4_B,
> +               .init = rpi_eth_init,
>         }, {
>                 .hw_id = BCM2711_BOARD_REV_400,
> +               .init = rpi_eth_init,
>         }, {
>                 .hw_id = BCM2711_BOARD_REV_CM4,
> +               .init = rpi_eth_init,
>         }, {
>                 .hw_id = U8_MAX
>         },

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |





[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux