On 10.07.23 08:36, Marco Felsch wrote: > Make use of the register definition instead of having magic numbers. No > functional change. > > Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx> Reviewed-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> > --- > arch/arm/boards/datamodul-edm-qmx6/board.c | 7 ++++--- > arch/arm/boards/embest-marsboard/board.c | 7 ++++--- > arch/arm/boards/terasic-de0-nano-soc/board.c | 7 ++++--- > arch/arm/boards/terasic-de10-nano/board.c | 7 ++++--- > arch/arm/boards/tqma6x/board.c | 7 ++++--- > 5 files changed, 20 insertions(+), 15 deletions(-) > > diff --git a/arch/arm/boards/datamodul-edm-qmx6/board.c b/arch/arm/boards/datamodul-edm-qmx6/board.c > index 9adb3ee0f8..366b64d35a 100644 > --- a/arch/arm/boards/datamodul-edm-qmx6/board.c > +++ b/arch/arm/boards/datamodul-edm-qmx6/board.c > @@ -11,6 +11,7 @@ > #include <gpio.h> > #include <of.h> > > +#include <linux/mdio.h> > #include <linux/micrel_phy.h> > #include <mfd/stmpe-i2c.h> > > @@ -48,9 +49,9 @@ static int ksz9031rn_phy_fixup(struct phy_device *dev) > * min rx data delay, max rx/tx clock delay, > * min rx/tx control delay > */ > - phy_write_mmd_indirect(dev, 4, 2, 0); > - phy_write_mmd_indirect(dev, 5, 2, 0); > - phy_write_mmd_indirect(dev, 8, 2, 0x03ff); > + phy_write_mmd_indirect(dev, 4, MDIO_MMD_WIS, 0); > + phy_write_mmd_indirect(dev, 5, MDIO_MMD_WIS, 0); > + phy_write_mmd_indirect(dev, 8, MDIO_MMD_WIS, 0x03ff); > > return 0; > } > diff --git a/arch/arm/boards/embest-marsboard/board.c b/arch/arm/boards/embest-marsboard/board.c > index 7835a9265a..7274595e2a 100644 > --- a/arch/arm/boards/embest-marsboard/board.c > +++ b/arch/arm/boards/embest-marsboard/board.c > @@ -9,6 +9,7 @@ > #include <init.h> > #include <envfs.h> > #include <mach/imx/bbu.h> > +#include <linux/mdio.h> > #include <linux/phy.h> > #include <deep-probe.h> > > @@ -19,13 +20,13 @@ static int ar8035_phy_fixup(struct phy_device *dev) > /* Ar803x phy SmartEEE feature cause link status generates glitch, > * which cause ethernet link down/up issue, so disable SmartEEE > */ > - val = phy_read_mmd_indirect(dev, 0x805d, 0x3); > + val = phy_read_mmd_indirect(dev, 0x805d, MDIO_MMD_PCS); > phy_write(dev, MII_MMD_DATA, val & ~(1 << 8)); > > - val = phy_read_mmd_indirect(dev, 0x4003, 0x3); > + val = phy_read_mmd_indirect(dev, 0x4003, MDIO_MMD_PCS); > phy_write(dev, MII_MMD_DATA, val & ~(1 << 8)); > > - val = phy_read_mmd_indirect(dev, 0x4007, 0x3); > + val = phy_read_mmd_indirect(dev, 0x4007, MDIO_MMD_PCS); > val &= 0xffe3; > val |= 0x18; > phy_write(dev, MII_MMD_DATA, val); > diff --git a/arch/arm/boards/terasic-de0-nano-soc/board.c b/arch/arm/boards/terasic-de0-nano-soc/board.c > index 19f74b784c..832160c595 100644 > --- a/arch/arm/boards/terasic-de0-nano-soc/board.c > +++ b/arch/arm/boards/terasic-de0-nano-soc/board.c > @@ -5,6 +5,7 @@ > #include <driver.h> > #include <init.h> > #include <asm/armlinux.h> > +#include <linux/mdio.h> > #include <linux/micrel_phy.h> > #include <linux/phy.h> > #include <linux/sizes.h> > @@ -18,9 +19,9 @@ static int phy_fixup(struct phy_device *dev) > * min rx data delay, max rx/tx clock delay, > * min rx/tx control delay > */ > - phy_write_mmd_indirect(dev, 4, 2, 0); > - phy_write_mmd_indirect(dev, 5, 2, 0); > - phy_write_mmd_indirect(dev, 8, 2, 0x003ff); > + phy_write_mmd_indirect(dev, 4, MDIO_MMD_WIS, 0); > + phy_write_mmd_indirect(dev, 5, MDIO_MMD_WIS, 0); > + phy_write_mmd_indirect(dev, 8, MDIO_MMD_WIS, 0x003ff); > return 0; > } > > diff --git a/arch/arm/boards/terasic-de10-nano/board.c b/arch/arm/boards/terasic-de10-nano/board.c > index 580c898012..e47d9ac841 100644 > --- a/arch/arm/boards/terasic-de10-nano/board.c > +++ b/arch/arm/boards/terasic-de10-nano/board.c > @@ -5,6 +5,7 @@ > #include <driver.h> > #include <init.h> > #include <asm/armlinux.h> > +#include <linux/mdio.h> > #include <linux/micrel_phy.h> > #include <linux/phy.h> > #include <linux/sizes.h> > @@ -18,9 +19,9 @@ static int phy_fixup(struct phy_device *dev) > * min rx data delay, max rx/tx clock delay, > * min rx/tx control delay > */ > - phy_write_mmd_indirect(dev, 4, 2, 0); > - phy_write_mmd_indirect(dev, 5, 2, 0); > - phy_write_mmd_indirect(dev, 8, 2, 0x003ff); > + phy_write_mmd_indirect(dev, 4, MDIO_MMD_WIS, 0); > + phy_write_mmd_indirect(dev, 5, MDIO_MMD_WIS, 0); > + phy_write_mmd_indirect(dev, 8, MDIO_MMD_WIS, 0x003ff); > return 0; > } > > diff --git a/arch/arm/boards/tqma6x/board.c b/arch/arm/boards/tqma6x/board.c > index 4bb7223a6e..8a91ad652a 100644 > --- a/arch/arm/boards/tqma6x/board.c > +++ b/arch/arm/boards/tqma6x/board.c > @@ -11,6 +11,7 @@ > #include <gpio.h> > #include <of.h> > > +#include <linux/mdio.h> > #include <linux/micrel_phy.h> > #include <mfd/stmpe-i2c.h> > > @@ -46,9 +47,9 @@ static int ksz9031rn_phy_fixup(struct phy_device *dev) > * min rx data delay, max rx/tx clock delay, > * min rx/tx control delay > */ > - phy_write_mmd_indirect(dev, 4, 2, 0); > - phy_write_mmd_indirect(dev, 5, 2, 0); > - phy_write_mmd_indirect(dev, 8, 2, 0x003ff); > + phy_write_mmd_indirect(dev, 4, MDIO_MMD_WIS, 0); > + phy_write_mmd_indirect(dev, 5, MDIO_MMD_WIS, 0); > + phy_write_mmd_indirect(dev, 8, MDIO_MMD_WIS, 0x003ff); > > return 0; > } -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
