On 05.07.23 21:03, Marco Felsch wrote:
> The __esdhc_send_cmd checks the sdhci.timing setting and configures it
> accordingly. If the BootROM configured the device to operare in DDR mode
> we need to honor that else the PBL can't load the binary correctly from
> the eMMC. Therefore readback the sdhci mixctrl setting and set the
> sdhci.timing to DDR52. At the moment DDR52 is the fastest/highest
> transferrate the BootROM supports, so we don't need to handle HS200/400
> yet.
>
> Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
Reviewed-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
> ---
> drivers/mci/imx-esdhc-pbl.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/mci/imx-esdhc-pbl.c b/drivers/mci/imx-esdhc-pbl.c
> index 7c5febb7a8..f789f43b69 100644
> --- a/drivers/mci/imx-esdhc-pbl.c
> +++ b/drivers/mci/imx-esdhc-pbl.c
> @@ -120,6 +120,8 @@ esdhc_load_image(struct fsl_esdhc_host *host, ptrdiff_t address,
> static void imx_esdhc_init(struct fsl_esdhc_host *host,
> struct esdhc_soc_data *data)
> {
> + u32 mixctrl;
> +
> data->flags = ESDHC_FLAG_USDHC;
> host->socdata = data;
> esdhc_populate_sdhci(host);
> @@ -129,6 +131,10 @@ static void imx_esdhc_init(struct fsl_esdhc_host *host,
> FIELD_PREP(WML_WR_WML_MASK, SECTOR_WML) |
> FIELD_PREP(WML_RD_BRST_LEN, 16) |
> FIELD_PREP(WML_RD_WML_MASK, SECTOR_WML));
> +
> + mixctrl = sdhci_read32(&host->sdhci, IMX_SDHCI_MIXCTRL);
> + if (mixctrl & MIX_CTRL_DDREN)
> + host->sdhci.timing = MMC_TIMING_MMC_DDR52;
> }
>
> static int imx8m_esdhc_init(struct fsl_esdhc_host *host,
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
