Now that PBL firmware can be made optional, we can drop the existence
checks in the Kconfig. These were flawed anyway, because they didn't
take CONFIG_EXTRA_FIRMWARE_DIR into account and they led to issues with
build system recipes that didn't expect firmware to be required before
compilation step at oldconfig/menuconfig time.
This effectively reverts commits:
624962fb45c6 ("ARM: i.MX: make boards selectable only when firmware files are present")
4ff2e5510ec9 ("ARM: Rockchip: make boards only selectable when firmware is present")
41a89611774a ("ARM: rockchip: don't attempt building MACH_RADXA_ROCK5 without firmware")
Reported-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
---
arch/arm/mach-imx/Kconfig | 49 ----------------------------------
arch/arm/mach-rockchip/Kconfig | 6 -----
firmware/Kconfig | 39 ---------------------------
3 files changed, 94 deletions(-)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 5cd1428f9a6b..819c23bae88a 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -561,35 +561,9 @@ if 64BIT
comment "i.MX8M boards"
-if !HAVE_FIRMWARE_IMX_LPDDR4_PMU_TRAIN
-comment "LPDDR4 firmware files missing, some boards are not selectable"
-endif
-
-if !HAVE_FIRMWARE_IMX_DDR4_PMU_TRAIN
-comment "DDR4 firmware files missing, some boards are not selectable"
-endif
-
-if !HAVE_FIRMWARE_IMX8MM_ATF
-comment "i.MX8MM TF-A files missing, i.MX8MM boards are disabled"
-endif
-
-if !HAVE_FIRMWARE_IMX8MQ_ATF
-comment "i.MX8MQ TF-A files missing, i.MX8MQ boards are disabled"
-endif
-
-if !HAVE_FIRMWARE_IMX8MN_ATF
-comment "i.MX8MN TF-A files missing, i.MX8MN boards are disabled"
-endif
-
-if !HAVE_FIRMWARE_IMX8MP_ATF
-comment "i.MX8MP TF-A files missing, i.MX8MP boards are disabled"
-endif
-
config MACH_INNOCOMM_WB15
bool "InnoComm WB15 (i.MX8MM) EVK"
select ARCH_IMX8MM
- depends on HAVE_FIRMWARE_IMX_LPDDR4_PMU_TRAIN
- depends on HAVE_FIRMWARE_IMX8MM_ATF
select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
select FIRMWARE_IMX8MM_ATF
select ARM_SMCCC
@@ -622,8 +596,6 @@ config MACH_BEO_MOZART2
config MACH_MNT_REFORM
bool "MNT Reform"
select ARCH_IMX8MQ
- depends on HAVE_FIRMWARE_IMX_LPDDR4_PMU_TRAIN
- depends on HAVE_FIRMWARE_IMX8MQ_ATF
select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
select FIRMWARE_IMX8MQ_ATF
select ARM_SMCCC
@@ -633,8 +605,6 @@ config MACH_MNT_REFORM
config MACH_NXP_IMX8MM_EVK
bool "NXP i.MX8MM EVK Board"
select ARCH_IMX8MM
- depends on HAVE_FIRMWARE_IMX_LPDDR4_PMU_TRAIN
- depends on HAVE_FIRMWARE_IMX8MM_ATF
select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
select FIRMWARE_IMX8MM_ATF
select ARM_SMCCC
@@ -646,9 +616,6 @@ config MACH_NXP_IMX8MM_EVK
config MACH_NXP_IMX8MN_EVK
bool "NXP i.MX8MN EVK Board"
select ARCH_IMX8MN
- depends on HAVE_FIRMWARE_IMX_LPDDR4_PMU_TRAIN
- depends on HAVE_FIRMWARE_IMX_DDR4_PMU_TRAIN
- depends on HAVE_FIRMWARE_IMX8MN_ATF
select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
select FIRMWARE_IMX_DDR4_PMU_TRAIN
select FIRMWARE_IMX8MN_ATF
@@ -660,8 +627,6 @@ config MACH_NXP_IMX8MN_EVK
config MACH_NXP_IMX8MP_EVK
bool "NXP i.MX8MP EVK Board"
select ARCH_IMX8MP
- depends on HAVE_FIRMWARE_IMX_LPDDR4_PMU_TRAIN
- depends on HAVE_FIRMWARE_IMX8MP_ATF
select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
select FIRMWARE_IMX8MP_ATF
select ARM_SMCCC
@@ -672,8 +637,6 @@ config MACH_NXP_IMX8MP_EVK
config MACH_NXP_IMX8MQ_EVK
bool "NXP i.MX8MQ EVK Board"
select ARCH_IMX8MQ
- depends on HAVE_FIRMWARE_IMX_LPDDR4_PMU_TRAIN
- depends on HAVE_FIRMWARE_IMX8MQ_ATF
select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
select FIRMWARE_IMX8MQ_ATF
select ARM_SMCCC
@@ -682,8 +645,6 @@ config MACH_NXP_IMX8MQ_EVK
config MACH_PHYTEC_SOM_IMX8MQ
bool "Phytec i.MX8M SOM"
select ARCH_IMX8MQ
- depends on HAVE_FIRMWARE_IMX_LPDDR4_PMU_TRAIN
- depends on HAVE_FIRMWARE_IMX8MQ_ATF
select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
select FIRMWARE_IMX8MQ_ATF
select ARM_SMCCC
@@ -692,8 +653,6 @@ config MACH_PHYTEC_SOM_IMX8MQ
config MACH_POLYHEX_DEBIX
bool "Polyhex DEBIX Model-A/B (i.MX8MP) Board"
select ARCH_IMX8MP
- depends on HAVE_FIRMWARE_IMX_LPDDR4_PMU_TRAIN
- depends on HAVE_FIRMWARE_IMX8MP_ATF
select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
select FIRMWARE_IMX8MP_ATF
select ARM_SMCCC
@@ -704,8 +663,6 @@ config MACH_POLYHEX_DEBIX
config MACH_PROTONIC_IMX8M
bool "Protonic-Holland i.MX8Mx based boards"
select ARCH_IMX8MM
- depends on HAVE_FIRMWARE_IMX_LPDDR4_PMU_TRAIN
- depends on HAVE_FIRMWARE_IMX8MM_ATF
select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
select FIRMWARE_IMX8MM_ATF
select ARM_SMCCC
@@ -716,8 +673,6 @@ config MACH_PROTONIC_IMX8M
config MACH_TQ_MBA8MPXL
bool "TQ i.MX8MP Dual/Quad on MBa8MPxL Board"
select ARCH_IMX8MP
- depends on HAVE_FIRMWARE_IMX_LPDDR4_PMU_TRAIN
- depends on HAVE_FIRMWARE_IMX8MP_ATF
select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
select FIRMWARE_IMX8MP_ATF
select ARM_SMCCC
@@ -728,8 +683,6 @@ config MACH_TQ_MBA8MPXL
config MACH_VARISCITE_DT8MCUSTOMBOARD_IMX8MP
bool "Variscite DT8MCustomBoard with DART-MX8M-PLUS"
select ARCH_IMX8MP
- depends on HAVE_FIRMWARE_IMX_LPDDR4_PMU_TRAIN
- depends on HAVE_FIRMWARE_IMX8MP_ATF
select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
select FIRMWARE_IMX8MP_ATF
select ARM_SMCCC
@@ -740,8 +693,6 @@ config MACH_VARISCITE_DT8MCUSTOMBOARD_IMX8MP
config MACH_ZII_IMX8MQ_DEV
bool "ZII i.MX8MQ based devices"
select ARCH_IMX8MQ
- depends on HAVE_FIRMWARE_IMX_LPDDR4_PMU_TRAIN
- depends on HAVE_FIRMWARE_IMX8MQ_ATF
select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
select FIRMWARE_IMX8MQ_ATF
select ARM_SMCCC
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index a71c4ae35dd9..8cdf2c28a912 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -75,42 +75,36 @@ if 64BIT
config MACH_RK3568_EVB
select ARCH_RK3568
- depends on $(success,test -e $(srctree)/arch/arm/boards/rockchip-rk3568-evb/sdram-init.bin)
bool "RK3568 EVB"
help
Say Y here if you are using a RK3568 EVB
config MACH_RK3568_BPI_R2PRO
select ARCH_RK3568
- depends on $(success,test -e $(srctree)/arch/arm/boards/rockchip-rk3568-bpi-r2pro/sdram-init.bin)
bool "RK3568 BPI R2PRO"
help
Say Y here if you are using a RK3568 Bananpi R2 Pro
config MACH_PINE64_QUARTZ64
select ARCH_RK3568
- depends on $(success,test -e $(srctree)/arch/arm/boards/pine64-quartz64/sdram-init.bin)
bool "Pine64 Quartz64"
help
Say Y here if you are using a Pine64 Quartz64
config MACH_RADXA_ROCK3
select ARCH_RK3568
- depends on $(success,test -e $(srctree)/arch/arm/boards/radxa-rock3/sdram-init.bin)
bool "Radxa ROCK3"
help
Say Y here if you are using a Radxa ROCK3
config MACH_RADXA_ROCK5
select ARCH_RK3588
- depends on $(success,test -e $(srctree)/arch/arm/boards/radxa-rock5/sdram-init.bin)
bool "Radxa ROCK5"
help
Say Y here if you are using a Radxa ROCK5
config MACH_RADXA_CM3
select ARCH_RK3568
- depends on $(success,test -e $(srctree)/arch/arm/boards/radxa-cm3/sdram-init.bin)
bool "Radxa CM3"
help
Say Y here if you are using a Radxa CM3
diff --git a/firmware/Kconfig b/firmware/Kconfig
index 56d6d0d6c030..3328dbc0b111 100644
--- a/firmware/Kconfig
+++ b/firmware/Kconfig
@@ -20,74 +20,35 @@ config MISSING_FIRMWARE_ERROR
If in doubt, say Y and refer to the documentation on where to acquire the
needed firmware.
-config HAVE_FIRMWARE_IMX_LPDDR4_PMU_TRAIN
- bool
- default y
- depends on $(success,test -e $(srctree)/firmware/lpddr4_pmu_train_1d_dmem.bin)
- depends on $(success,test -e $(srctree)/firmware/lpddr4_pmu_train_1d_imem.bin)
- depends on $(success,test -e $(srctree)/firmware/lpddr4_pmu_train_2d_dmem.bin)
- depends on $(success,test -e $(srctree)/firmware/lpddr4_pmu_train_2d_imem.bin)
-
config FIRMWARE_IMX_LPDDR4_PMU_TRAIN
bool
-config HAVE_FIRMWARE_IMX_DDR4_PMU_TRAIN
- bool
- default y
- depends on $(success,test -e $(srctree)/firmware/ddr4_dmem_1d.bin)
- depends on $(success,test -e $(srctree)/firmware/ddr4_dmem_2d.bin)
- depends on $(success,test -e $(srctree)/firmware/ddr4_imem_1d.bin)
- depends on $(success,test -e $(srctree)/firmware/ddr4_imem_2d.bin)
-
config FIRMWARE_IMX_DDR4_PMU_TRAIN
bool
-config HAVE_FIRMWARE_IMX8MM_ATF
- bool
- default y
- depends on $(success,test -e $(srctree)/firmware/imx8mm-bl31.bin)
-
config FIRMWARE_IMX8MM_ATF
bool
-config HAVE_FIRMWARE_IMX8MN_ATF
- bool
- default y
- depends on $(success,test -e $(srctree)/firmware/imx8mn-bl31.bin)
-
config FIRMWARE_IMX8MN_ATF
bool
-config HAVE_FIRMWARE_IMX8MP_ATF
- bool
- default y
- depends on $(success,test -e $(srctree)/firmware/imx8mp-bl31.bin)
-
config FIRMWARE_IMX8MP_ATF
bool
-config HAVE_FIRMWARE_IMX8MQ_ATF
- bool
- default y
- depends on $(success,test -e $(srctree)/firmware/imx8mq-bl31.bin)
-
config FIRMWARE_IMX8MQ_ATF
bool
config FIRMWARE_IMX8MM_OPTEE
bool "install OP-TEE on i.MX8MM boards"
depends on FIRMWARE_IMX8MM_ATF && PBL_OPTEE
- depends on $(success,test -e $(srctree)/firmware/imx8mm-bl32.bin)
config FIRMWARE_IMX8MN_OPTEE
bool "install OP-TEE on i.MX8MN boards"
depends on FIRMWARE_IMX8MN_ATF && PBL_OPTEE
- depends on $(success,test -e $(srctree)/firmware/imx8mn-bl32.bin)
config FIRMWARE_IMX8MP_OPTEE
bool "install OP-TEE on i.MX8MP boards"
depends on FIRMWARE_IMX8MP_ATF && PBL_OPTEE
- depends on $(success,test -e $(srctree)/firmware/imx8mp-bl32.bin)
config FIRMWARE_CCBV2_OPTEE
bool
--
2.39.2
