This patch imports and cleans up the SoM detection for imx8n based SoM
from u-boot.
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
---
common/boards/Kconfig | 7 +
common/boards/Makefile | 1 +
common/boards/phytec/Makefile | 4 +
common/boards/phytec/phytec-som-detection.c | 209 ++++++++++++++++++++++
common/boards/phytec/phytec-som-imx8m-detection.c | 151 ++++++++++++++++
include/phytec-som-detection.h | 69 +++++++
include/phytec-som-imx8m-detection.h | 19 ++
7 files changed, 460 insertions(+)
diff --git a/common/boards/Kconfig b/common/boards/Kconfig
index e27273b7671d..b240548b484d 100644
--- a/common/boards/Kconfig
+++ b/common/boards/Kconfig
@@ -2,3 +2,10 @@
config BOARD_QEMU_VIRT
bool
+
+config BOARD_PHYTEC_SOM_DETECTION
+ bool
+
+config BOARD_PHYTEC_SOM_IMX8M_DETECTION
+ bool
+ select BOARD_PHYTEC_SOM_DETECTION
diff --git a/common/boards/Makefile b/common/boards/Makefile
index 5b4e429c13e9..2a96ce6aec5c 100644
--- a/common/boards/Makefile
+++ b/common/boards/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_BOARD_QEMU_VIRT) += qemu-virt/
+obj-y += phytec/
diff --git a/common/boards/phytec/Makefile b/common/boards/phytec/Makefile
new file mode 100644
index 000000000000..741a0e2eb704
--- /dev/null
+++ b/common/boards/phytec/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+lwl-$(CONFIG_BOARD_PHYTEC_SOM_DETECTION) += phytec-som-detection.o
+lwl-$(CONFIG_BOARD_PHYTEC_SOM_IMX8M_DETECTION) += phytec-som-imx8m-detection.o
diff --git a/common/boards/phytec/phytec-som-detection.c b/common/boards/phytec/phytec-som-detection.c
new file mode 100644
index 000000000000..d9479f8ced69
--- /dev/null
+++ b/common/boards/phytec/phytec-som-detection.c
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@xxxxxxxxx>
+ */
+
+#include <common.h>
+#include <pbl/eeprom.h>
+#include <phytec-som-imx8m-detection.h>
+
+struct phytec_eeprom_data eeprom_data;
+
+#define POLY (0x1070U << 3)
+
+static u8 _crc8(u16 data)
+{
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ if (data & 0x8000)
+ data = data ^ POLY;
+ data = data << 1;
+ }
+
+ return data >> 8;
+}
+
+static unsigned int crc8(unsigned int crc, const u8 *vptr, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++)
+ crc = _crc8((crc ^ vptr[i]) << 8);
+
+ return crc;
+}
+
+char *phytec_get_opt(struct phytec_eeprom_data *data)
+{
+ char *opt;
+
+ if (!data)
+ data = &eeprom_data;
+
+ switch (data->api_rev) {
+ case PHYTEC_API_REV0:
+ case PHYTEC_API_REV1:
+ opt = data->data.data_api0.opt;
+ break;
+ case PHYTEC_API_REV2:
+ opt = data->data.data_api2.opt;
+ break;
+ default:
+ opt = NULL;
+ break;
+ };
+
+ return opt;
+}
+
+static int phytec_eeprom_data_init(struct pbl_i2c *i2c,
+ struct phytec_eeprom_data *data,
+ int addr, u8 phytec_som_type)
+{
+ unsigned int crc;
+ char *opt;
+ int *ptr;
+ int ret = -1, i;
+ u8 som;
+
+ if (!data)
+ data = &eeprom_data;
+
+ eeprom_read(i2c, addr, I2C_ADDR_16_BIT, data, sizeof(struct phytec_eeprom_data));
+
+ if (data->api_rev == 0xff) {
+ pr_err("%s: EEPROM is not flashed. Prototype?\n", __func__);
+ return -EINVAL;
+ }
+
+ for (i = 0, ptr = (int *)data;
+ i < sizeof(struct phytec_eeprom_data);
+ i += sizeof(ptr), ptr++)
+ if (*ptr != 0x0)
+ break;
+
+ if (i == sizeof(struct phytec_eeprom_data)) {
+ pr_err("%s: EEPROM data is all zero. Erased?\n", __func__);
+ return -EINVAL;
+ }
+
+ if (data->api_rev > PHYTEC_API_REV2) {
+ pr_err("%s: EEPROM API revision %u not supported\n",
+ __func__, data->api_rev);
+ return -EINVAL;
+ }
+
+ /* We are done here for early revisions */
+ if (data->api_rev <= PHYTEC_API_REV1)
+ return 0;
+
+ crc = crc8(0, (const unsigned char *)data,
+ sizeof(struct phytec_eeprom_data));
+ pr_debug("%s: crc: %x\n", __func__, crc);
+
+ if (crc) {
+ pr_err("%s: CRC mismatch. EEPROM data is not usable\n", __func__);
+ return -EINVAL;
+ }
+
+ som = data->data.data_api2.som_no;
+ pr_debug("%s: som id: %u\n", __func__, som);
+ opt = phytec_get_opt(data);
+ if (!opt)
+ return -EINVAL;
+
+ if (IS_ENABLED(CONFIG_BOARD_PHYTEC_SOM_IMX8M_DETECTION))
+ ret = phytec_imx8m_detect(som, opt, phytec_som_type);
+
+ if (ret) {
+ pr_err("%s: SoM ID does not match. Wrong EEPROM data?\n", __func__);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+void phytec_print_som_info(struct phytec_eeprom_data *data)
+{
+ struct phytec_api2_data *api2;
+ char pcb_sub_rev;
+ unsigned int ksp_no, sub_som_type1 = -1, sub_som_type2 = -1;
+
+ if (!data)
+ data = &eeprom_data;
+
+ if (data->api_rev < PHYTEC_API_REV2)
+ return;
+
+ api2 = &data->data.data_api2;
+
+ /* Calculate PCB subrevision */
+ pcb_sub_rev = api2->pcb_sub_opt_rev & 0x0f;
+ pcb_sub_rev = pcb_sub_rev ? ((pcb_sub_rev - 1) + 'a') : ' ';
+
+ /* print standard product string */
+ if (api2->som_type <= 1) {
+ pr_info("SoM: %s-%03u-%s.%s PCB rev: %u%c\n",
+ phytec_som_type_str[api2->som_type], api2->som_no,
+ api2->opt, api2->bom_rev, api2->pcb_rev, pcb_sub_rev);
+ return;
+ }
+ /* print KSP/KSM string */
+ if (api2->som_type <= 3) {
+ ksp_no = (api2->ksp_no << 8) | api2->som_no;
+ pr_info("SoM: %s-%u ",
+ phytec_som_type_str[api2->som_type], ksp_no);
+ /* print standard product based KSP/KSM strings */
+ } else {
+ switch (api2->som_type) {
+ case 4:
+ sub_som_type1 = 0;
+ sub_som_type2 = 3;
+ break;
+ case 5:
+ sub_som_type1 = 0;
+ sub_som_type2 = 2;
+ break;
+ case 6:
+ sub_som_type1 = 1;
+ sub_som_type2 = 3;
+ break;
+ case 7:
+ sub_som_type1 = 1;
+ sub_som_type2 = 2;
+ break;
+ default:
+ break;
+ };
+
+ pr_info("SoM: %s-%03u-%s-%03u ",
+ phytec_som_type_str[sub_som_type1],
+ api2->som_no, phytec_som_type_str[sub_som_type2],
+ api2->ksp_no);
+ }
+
+ pr_cont("Option: %s BOM rev: %s PCB rev: %u%c\n", api2->opt,
+ api2->bom_rev, api2->pcb_rev, pcb_sub_rev);
+}
+
+int phytec_eeprom_data_setup(struct pbl_i2c *i2c, struct phytec_eeprom_data *data,
+ int addr, int addr_fallback, u8 cpu_type)
+{
+ int ret;
+
+ ret = phytec_eeprom_data_init(i2c, data, addr, cpu_type);
+ if (ret) {
+ pr_err("%s: init failed. Trying fall back address 0x%x\n",
+ __func__, addr_fallback);
+ ret = phytec_eeprom_data_init(i2c, data, addr_fallback, cpu_type);
+ }
+
+ if (ret)
+ pr_err("%s: EEPROM data init failed\n", __func__);
+ else
+ pr_debug("%s: init successful\n", __func__);
+
+ return ret;
+}
diff --git a/common/boards/phytec/phytec-som-imx8m-detection.c b/common/boards/phytec/phytec-som-imx8m-detection.c
new file mode 100644
index 000000000000..cc7fb6971548
--- /dev/null
+++ b/common/boards/phytec/phytec-som-imx8m-detection.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@xxxxxxxxx>
+ */
+
+#include <common.h>
+#include <mach/imx/generic.h>
+#include <phytec-som-imx8m-detection.h>
+
+extern struct phytec_eeprom_data eeprom_data;
+
+/* Check if the SoM is actually one of the following products:
+ * - i.MX8MM
+ * - i.MX8MN
+ * - i.MX8MP
+ * - i.MX8MQ
+ *
+ * Returns 0 in case it's a known SoM. Otherwise, returns -errno.
+ */
+u8 phytec_imx8m_detect(u8 som, char *opt, u8 cpu_type)
+{
+ if (som == PHYTEC_IMX8MP_SOM && cpu_type == IMX_CPU_IMX8MP)
+ return 0;
+
+ if (som == PHYTEC_IMX8MM_SOM) {
+ if (((opt[0] - '0') != 0) &&
+ ((opt[1] - '0') == 0) && cpu_type == IMX_CPU_IMX8MM)
+ return 0;
+ else if (((opt[0] - '0') == 0) &&
+ ((opt[1] - '0') != 0) && cpu_type == IMX_CPU_IMX8MN)
+ return 0;
+ return -EINVAL;
+ }
+
+ if (som == PHYTEC_IMX8MQ_SOM && cpu_type == IMX_CPU_IMX8MQ)
+ return 0;
+
+ return -EINVAL;
+}
+
+/*
+ * So far all PHYTEC i.MX8M boards have RAM size definition at the
+ * same location.
+ */
+u8 phytec_get_imx8m_ddr_size(struct phytec_eeprom_data *data)
+{
+ char *opt;
+ u8 ddr_id;
+
+ if (!data)
+ data = &eeprom_data;
+
+ opt = phytec_get_opt(data);
+ if (opt)
+ ddr_id = opt[2] - '0';
+ else
+ ddr_id = PHYTEC_EEPROM_INVAL;
+
+ pr_debug("%s: ddr id: %u\n", __func__, ddr_id);
+
+ return ddr_id;
+}
+
+/*
+ * Filter SPI-NOR flash information. All i.MX8M boards have this at
+ * the same location.
+ * returns: 0x0 if no SPI is poulated. Otherwise a board depended
+ * code for the size. PHYTEC_EEPROM_INVAL when the data is invalid.
+ */
+u8 phytec_get_imx8m_spi(struct phytec_eeprom_data *data)
+{
+ char *opt;
+ u8 spi;
+
+ if (!data)
+ data = &eeprom_data;
+
+ if (data->api_rev < PHYTEC_API_REV2)
+ return PHYTEC_EEPROM_INVAL;
+
+ opt = phytec_get_opt(data);
+ if (opt)
+ spi = opt[4] - '0';
+ else
+ spi = PHYTEC_EEPROM_INVAL;
+
+ pr_debug("%s: spi: %u\n", __func__, spi);
+
+ return spi;
+}
+
+/*
+ * Filter ethernet phy information. All i.MX8M boards have this at
+ * the same location.
+ * returns: 0x0 if no ethernet phy is poulated. 0x1 if it is populated.
+ * PHYTEC_EEPROM_INVAL when the data is invalid.
+ */
+u8 phytec_get_imx8m_eth(struct phytec_eeprom_data *data)
+{
+ char *opt;
+ u8 eth;
+
+ if (!data)
+ data = &eeprom_data;
+
+ if (data->api_rev < PHYTEC_API_REV2)
+ return PHYTEC_EEPROM_INVAL;
+
+ opt = phytec_get_opt(data);
+ if (opt) {
+ eth = opt[5] - '0';
+ eth &= 0x1;
+ } else {
+ eth = PHYTEC_EEPROM_INVAL;
+ }
+
+ pr_debug("%s: eth: %u\n", __func__, eth);
+
+ return eth;
+}
+
+/*
+ * Filter RTC information.
+ * returns: 0 if no RTC is poulated. 1 if it is populated.
+ * PHYTEC_EEPROM_INVAL when the data is invalid.
+ */
+u8 phytec_get_imx8mp_rtc(struct phytec_eeprom_data *data)
+{
+ char *opt;
+ u8 rtc;
+
+ if (!data)
+ data = &eeprom_data;
+
+ if (data->api_rev < PHYTEC_API_REV2)
+ return PHYTEC_EEPROM_INVAL;
+
+ opt = phytec_get_opt(data);
+ if (opt) {
+ rtc = opt[5] - '0';
+ rtc &= 0x4;
+ rtc = !(rtc >> 2);
+ } else {
+ rtc = PHYTEC_EEPROM_INVAL;
+ }
+
+ pr_debug("%s: rtc: %u\n", __func__, rtc);
+
+ return rtc;
+}
diff --git a/include/phytec-som-detection.h b/include/phytec-som-detection.h
new file mode 100644
index 000000000000..65c7cb561e1d
--- /dev/null
+++ b/include/phytec-som-detection.h
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2020 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@xxxxxxxxx>
+ */
+
+#ifndef _PHYTEC_SOM_DETECTION_H
+#define _PHYTEC_SOM_DETECTION_H
+
+#include <common.h>
+#include <pbl/i2c.h>
+
+#define PHYTEC_MAX_OPTIONS 17
+#define PHYTEC_IMX8MQ_SOM 66
+#define PHYTEC_IMX8MM_SOM 69
+#define PHYTEC_IMX8MP_SOM 70
+
+#define PHYTEC_EEPROM_INVAL 0xff
+
+enum {
+ PHYTEC_API_REV0 = 0,
+ PHYTEC_API_REV1,
+ PHYTEC_API_REV2,
+};
+
+static const char * const phytec_som_type_str[] = {
+ "PCM",
+ "PCL",
+ "KSM",
+ "KSP",
+};
+
+struct phytec_api0_data {
+ u8 pcb_rev; /* PCB revision of SoM */
+ u8 som_type; /* SoM type */
+ u8 ksp_no; /* KSP no */
+ char opt[16]; /* SoM options */
+ u8 mac[6]; /* MAC address (optional) */
+ u8 pad[5]; /* padding */
+ u8 cksum; /* checksum */
+} __attribute__ ((__packed__));
+
+struct phytec_api2_data {
+ u8 pcb_rev; /* PCB revision of SoM */
+ u8 pcb_sub_opt_rev; /* PCB subrevision and opt revision */
+ u8 som_type; /* SoM type */
+ u8 som_no; /* SoM number */
+ u8 ksp_no; /* KSP information */
+ char opt[PHYTEC_MAX_OPTIONS]; /* SoM options */
+ char bom_rev[2]; /* BOM revision */
+ u8 mac[6]; /* MAC address (optional) */
+ u8 crc8; /* checksum */
+} __attribute__ ((__packed__));
+
+struct phytec_eeprom_data {
+ u8 api_rev;
+ union {
+ struct phytec_api0_data data_api0;
+ struct phytec_api2_data data_api2;
+ } data;
+} __attribute__ ((__packed__));
+
+char *phytec_get_opt(struct phytec_eeprom_data *data);
+int phytec_eeprom_data_setup(struct pbl_i2c *i2c, struct phytec_eeprom_data *data,
+ int addr, int addr_fallback, u8 cpu_type);
+
+void phytec_print_som_info(struct phytec_eeprom_data *data);
+
+#endif /* _PHYTEC_SOM_DETECTION_H */
diff --git a/include/phytec-som-imx8m-detection.h b/include/phytec-som-imx8m-detection.h
new file mode 100644
index 000000000000..108d40bb4030
--- /dev/null
+++ b/include/phytec-som-imx8m-detection.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2020 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@xxxxxxxxx>
+ */
+
+#ifndef _PHYTEC_SOM_IMX8M_DETECTION_H
+#define _PHYTEC_SOM_IMX8M_DETECTION_H
+
+#include <common.h>
+#include <phytec-som-detection.h>
+
+u8 phytec_imx8m_detect(u8 som, char *opt, u8 cpu_type);
+u8 phytec_get_imx8m_ddr_size(struct phytec_eeprom_data *data);
+u8 phytec_get_imx8mp_rtc(struct phytec_eeprom_data *data);
+u8 phytec_get_imx8m_spi(struct phytec_eeprom_data *data);
+u8 phytec_get_imx8m_eth(struct phytec_eeprom_data *data);
+
+#endif /* _PHYTEC_SOM_IMX8M_DETECTION_H */
--
2.39.2
