regulators shall no longer be collected in an extra subnode. Move them up one level. Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> --- arch/arm/dts/imx6ull-jozacp.dtsi | 72 +++++++++++++++----------------- 1 file changed, 33 insertions(+), 39 deletions(-) diff --git a/arch/arm/dts/imx6ull-jozacp.dtsi b/arch/arm/dts/imx6ull-jozacp.dtsi index f7d35684f8..53f617d4f8 100644 --- a/arch/arm/dts/imx6ull-jozacp.dtsi +++ b/arch/arm/dts/imx6ull-jozacp.dtsi @@ -30,48 +30,42 @@ reg = <0x80000000 0x10000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_5v: 5v-regulator { - compatible = "regulator-fixed"; - regulator-name = "regulator-5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_5v: 5v-regulator { + compatible = "regulator-fixed"; + regulator-name = "regulator-5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - reg_3p3v: 3p3-regulator { - compatible = "regulator-fixed"; - regulator-name = "regulator-3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <®_5v>; - regulator-always-on; - }; + reg_3p3v: 3p3-regulator { + compatible = "regulator-fixed"; + regulator-name = "regulator-3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_5v>; + regulator-always-on; + }; - reg_1p4v: 1p4-regulator { - compatible = "regulator-fixed"; - regulator-name = "regulator-1P4V"; - regulator-min-microvolt = <1400000>; - regulator-max-microvolt = <1400000>; - vin-supply = <®_5v>; - regulator-always-on; - }; + reg_1p4v: 1p4-regulator { + compatible = "regulator-fixed"; + regulator-name = "regulator-1P4V"; + regulator-min-microvolt = <1400000>; + regulator-max-microvolt = <1400000>; + vin-supply = <®_5v>; + regulator-always-on; + }; - reg_vbus: vbus-regulator { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_vbus>; - compatible = "regulator-fixed"; - regulator-name = "regulator-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <®_5v>; - gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_vbus: vbus-regulator { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vbus>; + compatible = "regulator-fixed"; + regulator-name = "regulator-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_5v>; + gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + enable-active-high; }; usdhc2_pwrseq: usdhc2-pwrseq { -- 2.30.2