This series focuses mainly on init handling of rpi board variants. Init of ethernet, usb and leds for known variants is generalized and serial number and machin-id support is added. This series also allows bcmgenet ethernet driver to use the hw-assigned mac address on bcm2711 based boards. Daniel Brát (5): ARM: rpi: rename function getting mac address ARM: rpi: add serial number readout ARM: rpi: rework rpi board init code ARM: rpi: add machine-id support ARM: rpi: enable reset source detection in defconfig arch/arm/boards/raspberry-pi/lowlevel.h | 3 +- arch/arm/boards/raspberry-pi/mbox-helpers.c | 29 +- arch/arm/boards/raspberry-pi/rpi-common.c | 439 +++++++++----------- arch/arm/configs/rpi_defconfig | 2 + arch/arm/configs/rpi_v8a_defconfig | 2 + arch/arm/dts/bcm2711-rpi-4.dts | 5 + arch/arm/dts/bcm2835-rpi.dts | 1 + arch/arm/dts/bcm2836-rpi-2.dts | 4 + arch/arm/dts/bcm2837-rpi-3.dts | 5 + arch/arm/mach-bcm283x/include/mach/mbox.h | 13 + 10 files changed, 265 insertions(+), 238 deletions(-) -- 2.34.1
