On Fri, 2022-09-30 at 14:15 +0200, Sascha Hauer wrote: > NAND boot on i.MX7 is the same as on i.MX6, just a little different. > This series adds a barebox update handler to allow writing barebox > to NAND flash. > > Sascha > > Johannes Zink (4): > mtd: nand-mxs: refactor flash layout configuration > mtd: nand-mxs: add i.MX7 FCB write support > imx-bbu-nand-fcb: isolate i.MX28 specific parts > imx-bbu-nand-fcb: extend for i.MX7 support > > Sascha Hauer (3): > mtd: nand-mxs: Factor out a bch read function > imx-bbu-nand-fcb: pass imx_handler further down > imx-bbu-nand-fcb: add fcb_read/fcb_write function hooks > > arch/arm/mach-imx/include/mach/imx7-regs.h | 3 + > common/Kconfig | 2 +- > common/imx-bbu-nand-fcb.c | 267 ++++++++++++++---- > drivers/mtd/nand/nand_mxs.c | 297 ++++++++++++++++++- > -- > include/bbu.h | 5 + > include/linux/mtd/nand_mxs.h | 4 + > include/soc/imx/imx-nand-bcb.h | 11 + > 7 files changed, 492 insertions(+), 97 deletions(-) > Tested-by: Johannes Zink <j.zink@xxxxxxxxxxxxxx> # innocomm S810 (i.MX7D) -- Pengutronix e.K. | Johannes Zink | Steuerwalder Str. 21 | https://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686| Fax: +49-5121-206917-5555 |
