Use a driver private buffer as network receive buffer rather than the
globally allocated ones which will be removed soon.
Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
drivers/net/smc91111.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/net/smc91111.c b/drivers/net/smc91111.c
index d503535c25..3b23bfedfd 100644
--- a/drivers/net/smc91111.c
+++ b/drivers/net/smc91111.c
@@ -446,6 +446,7 @@ struct smc91c111_priv {
int revision;
unsigned int control_setup;
unsigned int config_setup;
+ void *rx_buf;
};
#if (SMC_DEBUG > 2 )
@@ -1302,14 +1303,14 @@ static int smc91c111_eth_rx(struct eth_device *edev)
to send the DWORDs or the bytes first, or some
mixture. A mixture might improve already slow PIO
performance */
- SMC_insl(priv, SMC91111_DATA_REG , NetRxPackets[0],
+ SMC_insl(priv, SMC91111_DATA_REG , priv->rx_buf,
packet_length >> 2);
/* read the left over bytes */
if (packet_length & 3) {
int i;
unsigned char *tail =
- (unsigned char *)(NetRxPackets[0] +
+ (unsigned char *)(priv->rx_buf +
(packet_length & ~3));
unsigned long leftover = SMC_inl(priv,
SMC91111_DATA_REG);
@@ -1320,7 +1321,7 @@ static int smc91c111_eth_rx(struct eth_device *edev)
#if SMC_DEBUG > 2
printf("Receiving Packet\n");
- print_packet( NetRxPackets[0], packet_length );
+ print_packet(priv->rx_buf, packet_length );
#endif
} else {
/* error ... */
@@ -1343,7 +1344,7 @@ static int smc91c111_eth_rx(struct eth_device *edev)
if (!is_error) {
/* Pass the packet up to the protocol layers. */
- net_receive(edev, NetRxPackets[0], packet_length);
+ net_receive(edev, priv->rx_buf, packet_length);
return 0;
}
@@ -1445,6 +1446,7 @@ static int smc91c111_probe(struct device_d *dev)
priv = edev->priv;
priv->a = access_via_32bit;
+ priv->rx_buf = xmalloc(PKTSIZE);
if (dev->platform_data) {
struct smc91c111_pdata *pdata = dev->platform_data;
--
2.30.2
