On Tue, Aug 09, 2022 at 08:24:19AM +0200, Ahmad Fatoum wrote: > Instead of depending on the common code being enabled, just select it if > needed and reword the Kconfig text to fix some typos and to make > configuration easier. > > Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> > --- > drivers/net/Kconfig | 64 ++++++++++++++++++++++++--------------------- > 1 file changed, 34 insertions(+), 30 deletions(-) Applied, thanks Sascha > > diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig > index 803444cc44a4..341d02a1da5e 100644 > --- a/drivers/net/Kconfig > +++ b/drivers/net/Kconfig > @@ -55,71 +55,75 @@ config DRIVER_NET_DAVINCI_EMAC > select PHYLIB > > config DRIVER_NET_DESIGNWARE > - bool "Designware Universal MAC1000 ethernet platform support" > + bool "Designware DWMAC1000 Ethernet driver support" if COMPILE_TEST > depends on HAS_DMA > select PHYLIB > help > - This option enables support for the Synopsys > - Designware Core Univesal MAC 10M/100M/1G ethernet IP. > - > -if DRIVER_NET_DESIGNWARE > + This option is selected by platform glue drivers that contain > + a DWMAC1000-compatible Ethernet IP. > > config DRIVER_NET_DESIGNWARE_GENERIC > - bool "Designware Universal MAC ethernet generic driver" > + bool "Generic Synopsis Designware Ethernet driver" > + select DRIVER_NET_DESIGNWARE > + depends on HAS_DMA > help > - This option enables support for the Synopsys > - Designware Core Univesal MAC 10M/100M/1G ethernet IP on SoCFPGA. > + This option enables support for the generic Synopsys > + Designware Core Universal MAC 10M/100M/1G binding. Supported > + are 3.70a and 3.72. Most integrations additionally require > + access to platform-specific registers, e.g. for clocking. > + If you are on such a platform, use the platform specific > + driver instead. > > config DRIVER_NET_DESIGNWARE_SOCFPGA > - bool "Designware Universal MAC ethernet driver for SoCFPGA platforms" > - depends on ARCH_SOCFPGA || COMPILE_TEST > + bool "SOCFPGA Designware Ethernet driver" > + depends on HAS_DMA && (ARCH_SOCFPGA || COMPILE_TEST) > + select DRIVER_NET_DESIGNWARE > select MFD_SYSCON > select RESET_CONTROLLER > help > This option enables support for the Synopsys > - Designware Core Univesal MAC 10M/100M/1G ethernet IP on SoCFPGA. > + Designware Core Universal MAC 10M/100M/1G Ethernet IP on SoCFPGA. > > config DRIVER_NET_DESIGNWARE_STARFIVE > - bool "Designware Universal MAC ethernet driver for StarFive platforms" > - depends on SOC_STARFIVE || COMPILE_TEST > + bool "StarFive Designware Ethernet driver" > + depends on HAS_DMA && (SOC_STARFIVE || COMPILE_TEST) > + select DRIVER_NET_DESIGNWARE > select MFD_SYSCON > help > This option enables support for the Synopsys > - Designware Core Univesal MAC 10M/100M/1G ethernet IP on StarFive. > - > -endif > + Designware Core Universal MAC 10M/100M/1G Ethernet IP on StarFive. > > config DRIVER_NET_DESIGNWARE_EQOS > - bool "Designware Designware Ethernet QoS support" > - depends on HAS_DMA > - depends on COMMON_CLK > - depends on OFTREE > + bool "Designware EQOS (GMAC4) Ethernet driver support" if COMPILE_TEST > + depends on HAS_DMA && OFTREE > select PHYLIB > help > This option enables support for the Synopsys > Designware Ethernet Quality-of-Service (GMAC4). > > -if DRIVER_NET_DESIGNWARE_EQOS > - > config DRIVER_NET_DESIGNWARE_STM32 > - bool "Designware EQOS STM32 driver" > + bool "STM32 Designware Ethernet driver" > + depends on HAS_DMA && COMMON_CLK && OFTREE && (ARCH_STM32MP || COMPILE_TEST) > + select DRIVER_NET_DESIGNWARE_EQOS > select MFD_SYSCON > help > - This option enables support for the ethernet MAC on the STM32MP platforms. > + This option enables support for the Ethernet MAC on the STM32MP platforms. > > config DRIVER_NET_DESIGNWARE_TEGRA186 > - bool "Designware Universal MAC ethernet driver for Tegra 186 platforms" > + bool "Tegra 186/194 Designware Ethernet driver" > + depends on HAS_DMA && COMMON_CLK && OFTREE && (ARCH_TEGRA || COMPILE_TEST) > + select DRIVER_NET_DESIGNWARE_EQOS > select RESET_CONTROLLER > help > - This option enables support for the ethernet MAC on the Tegra186 & 194. > + This option enables support for the Ethernet MAC on the Tegra186 & 194. > > config DRIVER_NET_DESIGNWARE_ROCKCHIP > - bool "Designware Universal MAC ethernet driver for Rockchip platforms" > + bool "Rockchip Designware Ethernet driver" > + select DRIVER_NET_DESIGNWARE_EQOS > + depends on HAS_DMA && COMMON_CLK && OFTREE && (ARCH_ROCKCHIP || COMPILE_TEST) > select MFD_SYSCON > help > - This option enables support for the ethernet MAC on different Rockchip SoCs > - > -endif > + This option enables support for the Ethernet MAC on different Rockchip SoCs > > config DRIVER_NET_DM9K > bool "Davicom dm9k[E|A|B] ethernet driver" > -- > 2.30.2 > > > -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
