On Sat, Jul 30, 2022 at 11:53:53AM +0200, Ahmad Fatoum wrote: > The i.MX8MPlus uses the ROM API for chainloading over the USB, so there > is no use for the USB_GADGET_DRIVER_ARC_PBL. Besides, it is not even > applicable, because the OTG controller on the i.MX8MPlus is a Designware > Controller. > > Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> > --- > arch/arm/mach-imx/Kconfig | 1 - > 1 file changed, 1 deletion(-) Applied, thanks Sascha > > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > index 822a47dc0470..356a91644552 100644 > --- a/arch/arm/mach-imx/Kconfig > +++ b/arch/arm/mach-imx/Kconfig > @@ -589,7 +589,6 @@ config MACH_NXP_IMX8MP_EVK > select MCI_IMX_ESDHC_PBL > select IMX8M_DRAM > select I2C_IMX_EARLY > - select USB_GADGET_DRIVER_ARC_PBL > > config MACH_NXP_IMX8MQ_EVK > bool "NXP i.MX8MQ EVK Board" > -- > 2.30.2 > > > -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |