To make SJA1105 switch work properly with bareobx, we need to configure
RGMII ref_clk.
Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
---
arch/arm/boards/protonic-imx6/board.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boards/protonic-imx6/board.c b/arch/arm/boards/protonic-imx6/board.c
index 5ca80bd306..1a5c1a7bbd 100644
--- a/arch/arm/boards/protonic-imx6/board.c
+++ b/arch/arm/boards/protonic-imx6/board.c
@@ -654,6 +654,18 @@ static int prt_imx6_init_prtvt7(struct prt_imx6_priv *priv)
return 0;
}
+static int prt_imx6_init_prtwd3(struct prt_imx6_priv *priv)
+{
+ void __iomem *iomux = (void *)MX6_IOMUXC_BASE_ADDR;
+ uint32_t val;
+
+ val = readl(iomux + IOMUXC_GPR1);
+ val |= IMX6Q_GPR1_ENET_CLK_SEL_ANATOP;
+ writel(val, iomux + IOMUXC_GPR1);
+
+ return 0;
+}
+
static int prt_imx6_rfid_fixup(struct prt_imx6_priv *priv,
struct device_node *root)
{
@@ -1116,6 +1128,7 @@ static const struct prt_machine_data prt_imx6_cfg_prtwd3[] = {
.i2c_adapter = 0,
.emmc_usdhc = 2,
.sd_usdhc = 0,
+ .init = prt_imx6_init_prtwd3,
.flags = PRT_IMX6_BOOTSRC_EMMC,
}, {
.hw_id = UINT_MAX
--
2.30.2
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
