On 18/03/2022 12:59, Sascha Hauer wrote:
> Have a look at "md -s /dev/nand0.raw 0+2112", then you can see how the
> OOB data should look like and compare it with the data read in
> omap_gpmc_read_page_bch_rom_mode(). The ".raw" is important, I saw you
> printed 2112 bytes from a non raw device. I meant to print a single
> page, on a non raw device that would be 2048.
Oh thank god, I'm not gonna lie, I was kinda worried when I saw no
non-data bytes.
> You might have to enable CONFIG_MTD_RAW_DEVICE to get the raw device.
Thanks, that's exactly why I couldn't find the raw device.
Linux writes:
> ...
> 000007f0: 0a363335 0a373335 0a383335 0a393335 536.537.538.539.
> 00000800: a060ffff 7286981b 604c42b1 002b5238 ..`....r.BL`8R+.
> 00000810: 9ed8f629 4709bc76 8b658d4d 606e000c )...v..GM.e...n`
> 00000820: 0d54d92c 98ec3c7d 0048f800 4e9ee01e ,.T.}<....H....N
> 00000830: 3b4d302e 72844fa4 ffff0099 ffffffff .0M;.O.r........
^^
Barebox writes:
> ...
> 000007f0: 0a363335 0a373335 0a383335 0a393335 536.537.538.539.
> 00000800: a060ffff 7286981b 604c42b1 002b5238 ..`....r.BL`8R+.
> 00000810: 9ed8f629 4709bc76 8b658d4d 606e000c )...v..GM.e...n`
> 00000820: 0d54d92c 98ec3c7d 0048f800 4e9ee01e ,.T.}<....H....N
> 00000830: 3b4d302e 72844fa4 ffff6e99 ffffffff .0M;.O.r.n......
^^
So, interestingly, there does appear to be a 1 byte difference as well...
I'll have a look at the code you mentioned.
Thanks again
Tibault
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
