This patch series adds QSPI boot option to the IMX8 platforms. For the moment only the IMX8MN platform is supported. This has been tested with the support of the Flex SPI/QSPI driver on an IMX8MN-EVK board configured for QSPI boot (SW1:0110) and on an IMX8MN custom board with a QSPI flash. Joacim Zetterling (3): arch: arm: imx: spi: Add QSPI boot support to the IMX8 platforms scripts: imx: spi: Add QSPI boot support to IMX build image script arch: arm: imx: spi: Add QSPI boot option to the IMX8MN-EVK .../bb-cfg-param-imx8mn-evk.bin | Bin 0 -> 512 bytes .../flash-header-imx8mn-evk.imxcfg | 5 + arch/arm/boards/nxp-imx8mn-evk/lowlevel.c | 3 + arch/arm/mach-imx/Makefile | 1 + arch/arm/mach-imx/include/mach/imx-header.h | 2 + arch/arm/mach-imx/include/mach/xload.h | 1 + arch/arm/mach-imx/xload-qspi.c | 145 ++++++++++++++++++ scripts/imx/imx-image.c | 25 +++ scripts/imx/imx.c | 67 +++++++- 9 files changed, 248 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boards/nxp-imx8mn-evk/bb-cfg-param-imx8mn-evk.bin create mode 100644 arch/arm/mach-imx/xload-qspi.c -- 2.25.1 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox