On 2/25/22 11:25, Marc Kleine-Budde wrote:
On 25.02.2022 11:03:44, Bastian Krause wrote:
Activating the field return configuration returns a locked-down board
(nearly) to its open state. In order to burn the FIELD_RETURN fuse, the
CSF must contain a specific unlock command with the device's UID.
Signed-off-by: Bastian Krause <bst@xxxxxxxxxxxxxx>
---
.../include/mach/habv4-imx6-gencsf-template.h | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/mach-imx/include/mach/habv4-imx6-gencsf-template.h b/arch/arm/mach-imx/include/mach/habv4-imx6-gencsf-template.h
index a60b485292..45da2981cb 100644
--- a/arch/arm/mach-imx/include/mach/habv4-imx6-gencsf-template.h
+++ b/arch/arm/mach-imx/include/mach/habv4-imx6-gencsf-template.h
@@ -39,6 +39,18 @@ hab Engine = SETUP_HABV4_ENGINE
hab Features = SETUP_HABV4_FEATURES
#endif
+/*
+// allow fusing FIELD_RETURN
+// # ocotp0.permanent_write_enable=1
+// # mw -l -d /dev/imx-ocotp 0xb8 0x1
+hab [Unlock]
+hab Engine = OCOTP
+hab Features = FIELD RETURN
+// device-specific UID:
+// $ dd if=/sys/bus/nvmem/devices/imx-ocotp0/nvmem bs=4 skip=1 count=2 status=none | hexdump -ve '1/1 "0x%.2x, "' | sed 's/, $//'
+hab UID = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08
You probably want to comment this all out in the template...
I don't get it, that's all inside the /* commented section */.
Bastian
+*/
+
hab [Install Key]
/* verification key index in key store (0, 2...4) */
hab Verification index = 0
--
2.30.2
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
