Re: [PATCH 3/4] video: add MIPI DBI Type C Option 3 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jan 31, 2022 at 09:03:01AM +0100, Ahmad Fatoum wrote:
> Import the Linux v5.15 state of the driver to allow easy porting of
> MIPI-DBI displays like the Ilitek 9431 added in a follow-up commit.
> 
> Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
> ---
>  commands/Kconfig             |  19 ++
>  commands/Makefile            |   1 +
>  commands/mipi_dbi.c          | 104 ++++++++
>  drivers/video/Kconfig        |  14 ++
>  drivers/video/Makefile       |   1 +
>  drivers/video/mipi_dbi.c     | 467 +++++++++++++++++++++++++++++++++++
>  include/spi/spi.h            |  20 ++
>  include/video/mipi_dbi.h     | 105 ++++++++
>  include/video/mipi_display.h | 150 +++++++++++
>  9 files changed, 881 insertions(+)
>  create mode 100644 commands/mipi_dbi.c
>  create mode 100644 drivers/video/mipi_dbi.c
>  create mode 100644 include/video/mipi_dbi.h
>  create mode 100644 include/video/mipi_display.h
> 
> diff --git a/commands/Kconfig b/commands/Kconfig
> index ba8ca5cdebce..2e13a4ed90bd 100644
> --- a/commands/Kconfig
> +++ b/commands/Kconfig
> @@ -1969,6 +1969,25 @@ config CMD_SPI
>  		  -w BIT	bits per word (default 8)
>  		  -v		verbose
>  
> +config CMD_MIPI_DBI
> +	bool
> +	depends on DRIVER_VIDEO_MIPI_DBI && SPI
> +	select PRINTF_HEXSTR
> +	prompt "mipi_dbi command"
> +	help
> +	  Write/read from MIPI DBI device on SPI bus
> +
> +	  Usage: mipi_dbi [-brcmfwv] DATA...
> +
> +	  Options:
> +		  -b BUS	SPI bus number (default 0)
> +		  -r COUNT	bytes to read
> +		  -c		chip select (default 0)
> +		  -m MODE	SPI mode (default 0)
> +		  -f HZ		max speed frequency, in Hz (default 1 MHz)
> +		  -w BIT	bits per word (default 8)
> +		  -v		verbose

This doesn't match the actual command. Copy-paste from CMD_SPI above?

> +BAREBOX_CMD_HELP_START(mipi_dbi)
> +BAREBOX_CMD_HELP_TEXT("Options:")
> +BAREBOX_CMD_HELP_OPT ("-l\t",  "list all MIPI DBI devices")
> +BAREBOX_CMD_HELP_OPT ("-d DEVICE",  "select specific device (default is first registered)")
> +BAREBOX_CMD_HELP_OPT ("-w",  "issue write command")
> +BAREBOX_CMD_HELP_END
> +
> +
>  config DRIVER_VIDEO_BACKLIGHT
>  	bool "Add backlight support"
>  	help
> @@ -178,4 +181,15 @@ config DRIVER_VIDEO_SIMPLE_PANEL
>  	  Linux Kernel implementation this one is able to understand display-timings
>  	  nodes so that it's not necessary to keep a list of all known displays
>  	  with their corresponding timings in barebox.
> +
> +config DRIVER_VIDEO_PANEL_ILITEK_ILI9341
> +	tristate "Ilitek ILI9341 240x320 QVGA panels"
> +	depends on OFTREE && SPI
> +	select DRIVER_VIDEO_MIPI_DBI
> +	select VIDEO_VPL
> +	help
> +	  Say Y here if you want to enable support for Ilitek IL9341
> +	  QVGA (240x320) RGB panels. support serial & parallel rgb
> +	  interface.

This hunk should be in 4/4.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux