On Tue, Aug 31, 2021 at 08:47:15AM +0200, Steffen Trumtrar wrote: > From: Steffen Trumtrar <str@xxxxxxxxxxxxxx> > > The patch > > 0a47bce1b03fd236384e904dca005c0870ce8684 > mci: imx-esdhc: Use common DMA helpers > > converted the imx-esdhc driver to use the DMA helpers introduced with > > 60b608b2714472aa22862a20d04f267cbbac0863 > mci: sdhci: Add DMA transfer helpers > > The common DMA helpers however break support for BE-variants (e.g. > Layerscape) as the BLKATTR register seems to be a 32-bit register which > internally switches bytes when used with two 16-bit write accesses. > As the alignment should also work for LE-SDHCI-variants convert the two > 16-bit accesses to one 32-bit access. > > Signed-off-by: Steffen Trumtrar <str@xxxxxxxxxxxxxx> > --- > drivers/mci/sdhci.c | 5 ++--- > 1 file changed, 2 insertions(+), 3 deletions(-) Applied, thanks Sascha > > diff --git a/drivers/mci/sdhci.c b/drivers/mci/sdhci.c > index aca4a5a6f911..8b5520d6827a 100644 > --- a/drivers/mci/sdhci.c > +++ b/drivers/mci/sdhci.c > @@ -129,9 +129,8 @@ void sdhci_setup_data_pio(struct sdhci *sdhci, struct mci_data *data) > if (!data) > return; > > - sdhci_write16(sdhci, SDHCI_BLOCK_SIZE, sdhci->sdma_boundary | > - SDHCI_TRANSFER_BLOCK_SIZE(data->blocksize)); > - sdhci_write16(sdhci, SDHCI_BLOCK_COUNT, data->blocks); > + sdhci_write32(sdhci, SDHCI_BLOCK_SIZE, sdhci->sdma_boundary | > + SDHCI_TRANSFER_BLOCK_SIZE(data->blocksize) | data->blocks << 16); > } > > void sdhci_setup_data_dma(struct sdhci *sdhci, struct mci_data *data, > -- > 2.30.2 > > > _______________________________________________ > barebox mailing list > barebox@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/barebox > -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox