On Tue, 17 Aug 2021 13:04:27 +0300 Antony Pavlov <antonynpavlov@xxxxxxxxx> wrote: I have used git format-patch in a inproper way. Sorry! I'll resend the patchseries. > Changes since v3: > > * rebased on top of next branch; > * the "console: support set baudrate for fixed baudrate drivers" patch > is introduced so the "litex serial: add setbrg callback" patch is dropped; > * update mac0 IP-block base addresses in litex dts according to latest > SoC configuration. > > Changes since v2: > > * rebase on top of master branch (f873c7ff2497) + > "RISC-V: extend multi-image to support both S- and M-Mode" > (http://lists.infradead.org/pipermail/barebox/2021-May/036086.html). > * "litex serial: add setbrg callback" patch by Marek Czerski is added > for review; > * fix "clocksource: timer-riscv: select CSR from device tree" patch; > * change gpio IP-block base addresses in litex dts; > * gpio-74xx-mmio uses device_get_match_data() now. > > Changes since v1: > > * rebased on top of next branch; > * new patches are introduced: > * clocksource: timer-riscv: select CSR from device tree > * RISC-V: make RISCV_SBI and RISCV_M_MODE explicitly mutually exclusive > * RISC-V: make it possible to build RV32I multi-image with DEBUG_LL=n > * almost all of Ahmad's notes are fixed (e.g. unused header files inclusions are dropped); > * NOT FIXED: gpio-74xx-mmio still uses dev_get_drvdata(), not device_get_match_data() > > > Antony Pavlov (8): > clocksource: timer-riscv: select CSR from device tree > serial: add litex UART driver > console: support set baudrate for fixed baudrate drivers > gpio: add driver for 74xx-ICs with MMIO access > spi: add litex spiflash driver > net: add LiteEth driver > RISC-V: add LiteX SoC and linux-on-litex-vexriscv support > RISC-V: add litex_linux_defconfig > > arch/riscv/Kconfig.socs | 14 + > arch/riscv/boards/Makefile | 1 + > arch/riscv/boards/litex-linux/Makefile | 3 + > arch/riscv/boards/litex-linux/lowlevel.c | 22 ++ > arch/riscv/configs/litex_linux_defconfig | 75 +++++ > arch/riscv/dts/Makefile | 1 + > arch/riscv/dts/erizo.dtsi | 2 + > arch/riscv/dts/litex-linux.dts | 92 ++++++ > arch/riscv/dts/litex_soc_linux.dtsi | 49 +++ > arch/riscv/include/asm/debug_ll.h | 3 + > arch/riscv/include/asm/debug_ll_litex.h | 123 ++++++++ > common/Kconfig | 4 + > common/console.c | 10 +- > drivers/clocksource/timer-riscv.c | 24 +- > drivers/gpio/Kconfig | 14 + > drivers/gpio/Makefile | 1 + > drivers/gpio/gpio-74xx-mmio.c | 165 ++++++++++ > drivers/net/Kconfig | 8 + > drivers/net/Makefile | 1 + > drivers/net/liteeth.c | 376 +++++++++++++++++++++++ > drivers/serial/Makefile | 1 + > drivers/serial/serial_litex.c | 96 ++++++ > drivers/spi/Kconfig | 3 + > drivers/spi/Makefile | 1 + > drivers/spi/litex_spiflash.c | 241 +++++++++++++++ > images/Makefile.riscv | 4 + > 26 files changed, 1318 insertions(+), 16 deletions(-) > create mode 100644 arch/riscv/boards/litex-linux/Makefile > create mode 100644 arch/riscv/boards/litex-linux/lowlevel.c > create mode 100644 arch/riscv/configs/litex_linux_defconfig > create mode 100644 arch/riscv/dts/litex-linux.dts > create mode 100644 arch/riscv/dts/litex_soc_linux.dtsi > create mode 100644 arch/riscv/include/asm/debug_ll_litex.h > create mode 100644 drivers/gpio/gpio-74xx-mmio.c > create mode 100644 drivers/net/liteeth.c > create mode 100644 drivers/serial/serial_litex.c > create mode 100644 drivers/spi/litex_spiflash.c > > -- > 2.32.0 > -- Best regards, Antony Pavlov _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
