Re: [PATCH 1/5] net: drop Calxeda Highbank xgmac driver support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12.08.21 14:19, Ahmad Fatoum wrote:
> Support for MACH_HIGHBANK was removed in f0f96c3322d5
> ("ARM: remove Calxeda Highbank support"). There are no device trees
> either barebox or upstream using this network controller, so remove
> the driver as well.
> 
> Fixes: f0f96c3322d5 ("ARM: remove Calxeda Highbank support")
> Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>

Should've added a cover letter. With the recent virtio/dma and PCI
additions for x86, many network drivers can now be newly enabled
on x86, yielding different warnings/errors.

This series fixes that up.

> ---
>  drivers/net/Kconfig  |   4 -
>  drivers/net/Makefile |   1 -
>  drivers/net/xgmac.c  | 734 -------------------------------------------
>  3 files changed, 739 deletions(-)
>  delete mode 100644 drivers/net/xgmac.c
> 
> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> index 802169a86e8c..4a290bebbd75 100644
> --- a/drivers/net/Kconfig
> +++ b/drivers/net/Kconfig
> @@ -39,10 +39,6 @@ config DRIVER_NET_AT91_ETHER
>  	depends on HAS_AT91_ETHER
>  	select PHYLIB
>  
> -config DRIVER_NET_CALXEDA_XGMAC
> -	bool "Calxeda xgmac"
> -	depends on HAS_DMA
> -
>  config DRIVER_NET_CS8900
>  	bool "cs8900 ethernet driver"
>  	depends on HAS_CS8900 || COMPILE_TEST
> diff --git a/drivers/net/Makefile b/drivers/net/Makefile
> index fb3e3bdee46a..e5eede634e63 100644
> --- a/drivers/net/Makefile
> +++ b/drivers/net/Makefile
> @@ -4,7 +4,6 @@ obj-$(CONFIG_NET_USB)			+= usb/
>  obj-$(CONFIG_DRIVER_NET_AR231X)		+= ar231x.o
>  obj-$(CONFIG_DRIVER_NET_ARC_EMAC)	+= arc_emac.o
>  obj-$(CONFIG_DRIVER_NET_AT91_ETHER)	+= at91_ether.o
> -obj-$(CONFIG_DRIVER_NET_CALXEDA_XGMAC)	+= xgmac.o
>  obj-$(CONFIG_DRIVER_NET_CS8900)		+= cs8900.o
>  obj-$(CONFIG_DRIVER_NET_CPSW)		+= cpsw.o
>  obj-$(CONFIG_DRIVER_NET_DAVINCI_EMAC)	+= davinci_emac.o
> diff --git a/drivers/net/xgmac.c b/drivers/net/xgmac.c
> deleted file mode 100644
> index 136d78804349..000000000000
> --- a/drivers/net/xgmac.c
> +++ /dev/null
> @@ -1,734 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-or-later
> -/*
> - * Copyright 2010-2011 Calxeda, Inc.
> - */
> -
> -#include <common.h>
> -#include <dma.h>
> -#include <net.h>
> -#include <clock.h>
> -#include <malloc.h>
> -#include <xfuncs.h>
> -#include <init.h>
> -#include <errno.h>
> -#include <io.h>
> -#include <linux/err.h>
> -
> -#define TX_NUM_DESC			1
> -#define RX_NUM_DESC			32
> -
> -#define ETH_BUF_SZ			2048
> -#define TX_BUF_SZ			(ETH_BUF_SZ * TX_NUM_DESC)
> -#define RX_BUF_SZ			(ETH_BUF_SZ * RX_NUM_DESC)
> -
> -/* XGMAC Register definitions */
> -#define XGMAC_CONTROL		0x00000000	/* MAC Configuration */
> -#define XGMAC_FRAME_FILTER	0x00000004	/* MAC Frame Filter */
> -#define XGMAC_FLOW_CTRL		0x00000018	/* MAC Flow Control */
> -#define XGMAC_VLAN_TAG		0x0000001C	/* VLAN Tags */
> -#define XGMAC_VERSION		0x00000020	/* Version */
> -#define XGMAC_VLAN_INCL		0x00000024	/* VLAN tag for tx frames */
> -#define XGMAC_LPI_CTRL		0x00000028	/* LPI Control and Status */
> -#define XGMAC_LPI_TIMER		0x0000002C	/* LPI Timers Control */
> -#define XGMAC_TX_PACE		0x00000030	/* Transmit Pace and Stretch */
> -#define XGMAC_VLAN_HASH		0x00000034	/* VLAN Hash Table */
> -#define XGMAC_DEBUG		0x00000038	/* Debug */
> -#define XGMAC_INT_STAT		0x0000003C	/* Interrupt and Control */
> -#define XGMAC_ADDR_HIGH(reg)	(0x00000040 + ((reg) * 8))
> -#define XGMAC_ADDR_LOW(reg)	(0x00000044 + ((reg) * 8))
> -#define XGMAC_HASH(n)		(0x00000300 + (n) * 4) /* HASH table regs */
> -#define XGMAC_NUM_HASH		16
> -#define XGMAC_OMR		0x00000400
> -#define XGMAC_REMOTE_WAKE	0x00000700	/* Remote Wake-Up Frm Filter */
> -#define XGMAC_PMT		0x00000704	/* PMT Control and Status */
> -#define XGMAC_MMC_CTRL		0x00000800	/* XGMAC MMC Control */
> -#define XGMAC_MMC_INTR_RX	0x00000804	/* Recieve Interrupt */
> -#define XGMAC_MMC_INTR_TX	0x00000808	/* Transmit Interrupt */
> -#define XGMAC_MMC_INTR_MASK_RX	0x0000080c	/* Recieve Interrupt Mask */
> -#define XGMAC_MMC_INTR_MASK_TX	0x00000810	/* Transmit Interrupt Mask */
> -
> -
> -/* Hardware TX Statistics Counters */
> -#define XGMAC_MMC_TXOCTET_GB_LO	0x00000814
> -#define XGMAC_MMC_TXOCTET_GB_HI	0x00000818
> -#define XGMAC_MMC_TXFRAME_GB_LO	0x0000081C
> -#define XGMAC_MMC_TXFRAME_GB_HI	0x00000820
> -#define XGMAC_MMC_TXBCFRAME_G	0x00000824
> -#define XGMAC_MMC_TXMCFRAME_G	0x0000082C
> -#define XGMAC_MMC_TXUCFRAME_GB	0x00000864
> -#define XGMAC_MMC_TXMCFRAME_GB	0x0000086C
> -#define XGMAC_MMC_TXBCFRAME_GB	0x00000874
> -#define XGMAC_MMC_TXUNDERFLOW	0x0000087C
> -#define XGMAC_MMC_TXOCTET_G_LO	0x00000884
> -#define XGMAC_MMC_TXOCTET_G_HI	0x00000888
> -#define XGMAC_MMC_TXFRAME_G_LO	0x0000088C
> -#define XGMAC_MMC_TXFRAME_G_HI	0x00000890
> -#define XGMAC_MMC_TXPAUSEFRAME	0x00000894
> -#define XGMAC_MMC_TXVLANFRAME	0x0000089C
> -
> -/* Hardware RX Statistics Counters */
> -#define XGMAC_MMC_RXFRAME_GB_LO	0x00000900
> -#define XGMAC_MMC_RXFRAME_GB_HI	0x00000904
> -#define XGMAC_MMC_RXOCTET_GB_LO	0x00000908
> -#define XGMAC_MMC_RXOCTET_GB_HI	0x0000090C
> -#define XGMAC_MMC_RXOCTET_G_LO	0x00000910
> -#define XGMAC_MMC_RXOCTET_G_HI	0x00000914
> -#define XGMAC_MMC_RXBCFRAME_G	0x00000918
> -#define XGMAC_MMC_RXMCFRAME_G	0x00000920
> -#define XGMAC_MMC_RXCRCERR	0x00000928
> -#define XGMAC_MMC_RXRUNT	0x00000930
> -#define XGMAC_MMC_RXJABBER	0x00000934
> -#define XGMAC_MMC_RXUCFRAME_G	0x00000970
> -#define XGMAC_MMC_RXLENGTHERR	0x00000978
> -#define XGMAC_MMC_RXPAUSEFRAME	0x00000988
> -#define XGMAC_MMC_RXOVERFLOW	0x00000990
> -#define XGMAC_MMC_RXVLANFRAME	0x00000998
> -#define XGMAC_MMC_RXWATCHDOG	0x000009a0
> -
> -/* DMA Control and Status Registers */
> -#define XGMAC_DMA_BUS_MODE	0x00000f00	/* Bus Mode */
> -#define XGMAC_DMA_TX_POLL	0x00000f04	/* Transmit Poll Demand */
> -#define XGMAC_DMA_RX_POLL	0x00000f08	/* Received Poll Demand */
> -#define XGMAC_DMA_RX_BASE_ADDR	0x00000f0c	/* Receive List Base */
> -#define XGMAC_DMA_TX_BASE_ADDR	0x00000f10	/* Transmit List Base */
> -#define XGMAC_DMA_STATUS	0x00000f14	/* Status Register */
> -#define XGMAC_DMA_CONTROL	0x00000f18	/* Ctrl (Operational Mode) */
> -#define XGMAC_DMA_INTR_ENA	0x00000f1c	/* Interrupt Enable */
> -#define XGMAC_DMA_MISS_FRAME_CTR 0x00000f20	/* Missed Frame Counter */
> -#define XGMAC_DMA_RI_WDOG_TIMER	0x00000f24	/* RX Intr Watchdog Timer */
> -#define XGMAC_DMA_AXI_BUS	0x00000f28	/* AXI Bus Mode */
> -#define XGMAC_DMA_AXI_STATUS	0x00000f2C	/* AXI Status */
> -#define XGMAC_DMA_HW_FEATURE	0x00000f58	/* Enabled Hardware Features */
> -
> -#define XGMAC_ADDR_AE		0x80000000
> -#define XGMAC_MAX_FILTER_ADDR	31
> -
> -/* PMT Control and Status */
> -#define XGMAC_PMT_POINTER_RESET	0x80000000
> -#define XGMAC_PMT_GLBL_UNICAST	0x00000200
> -#define XGMAC_PMT_WAKEUP_RX_FRM	0x00000040
> -#define XGMAC_PMT_MAGIC_PKT	0x00000020
> -#define XGMAC_PMT_WAKEUP_FRM_EN	0x00000004
> -#define XGMAC_PMT_MAGIC_PKT_EN	0x00000002
> -#define XGMAC_PMT_POWERDOWN	0x00000001
> -
> -#define XGMAC_CONTROL_SPD	0x40000000	/* Speed control */
> -#define XGMAC_CONTROL_SPD_MASK	0x60000000
> -#define XGMAC_CONTROL_SPD_1G	0x60000000
> -#define XGMAC_CONTROL_SPD_2_5G	0x40000000
> -#define XGMAC_CONTROL_SPD_10G	0x00000000
> -#define XGMAC_CONTROL_SARC	0x10000000	/* Source Addr Insert/Replace */
> -#define XGMAC_CONTROL_SARK_MASK	0x18000000
> -#define XGMAC_CONTROL_CAR	0x04000000	/* CRC Addition/Replacement */
> -#define XGMAC_CONTROL_CAR_MASK	0x06000000
> -#define XGMAC_CONTROL_DP	0x01000000	/* Disable Padding */
> -#define XGMAC_CONTROL_WD	0x00800000	/* Disable Watchdog on rx */
> -#define XGMAC_CONTROL_JD	0x00400000	/* Jabber disable */
> -#define XGMAC_CONTROL_JE	0x00100000	/* Jumbo frame */
> -#define XGMAC_CONTROL_LM	0x00001000	/* Loop-back mode */
> -#define XGMAC_CONTROL_IPC	0x00000400	/* Checksum Offload */
> -#define XGMAC_CONTROL_ACS	0x00000080	/* Automatic Pad/FCS Strip */
> -#define XGMAC_CONTROL_DDIC	0x00000010	/* Disable Deficit Idle Count */
> -#define XGMAC_CONTROL_TE	0x00000008	/* Transmitter Enable */
> -#define XGMAC_CONTROL_RE	0x00000004	/* Receiver Enable */
> -
> -/* XGMAC Frame Filter defines */
> -#define XGMAC_FRAME_FILTER_PR	0x00000001	/* Promiscuous Mode */
> -#define XGMAC_FRAME_FILTER_HUC	0x00000002	/* Hash Unicast */
> -#define XGMAC_FRAME_FILTER_HMC	0x00000004	/* Hash Multicast */
> -#define XGMAC_FRAME_FILTER_DAIF	0x00000008	/* DA Inverse Filtering */
> -#define XGMAC_FRAME_FILTER_PM	0x00000010	/* Pass all multicast */
> -#define XGMAC_FRAME_FILTER_DBF	0x00000020	/* Disable Broadcast frames */
> -#define XGMAC_FRAME_FILTER_SAIF	0x00000100	/* Inverse Filtering */
> -#define XGMAC_FRAME_FILTER_SAF	0x00000200	/* Source Address Filter */
> -#define XGMAC_FRAME_FILTER_HPF	0x00000400	/* Hash or perfect Filter */
> -#define XGMAC_FRAME_FILTER_VHF	0x00000800	/* VLAN Hash Filter */
> -#define XGMAC_FRAME_FILTER_VPF	0x00001000	/* VLAN Perfect Filter */
> -#define XGMAC_FRAME_FILTER_RA	0x80000000	/* Receive all mode */
> -
> -#define FIFO_MINUS_1K			0x0
> -#define FIFO_MINUS_2K			0x1
> -#define FIFO_MINUS_3K			0x2
> -#define FIFO_MINUS_4K			0x3
> -#define FIFO_MINUS_6K			0x4
> -#define FIFO_MINUS_8K			0x5
> -#define FIFO_MINUS_12K			0x6
> -#define FIFO_MINUS_16K			0x7
> -
> -/* XGMAC FLOW CTRL defines */
> -#define XGMAC_FLOW_CTRL_PT_MASK	0xffff0000	/* Pause Time Mask */
> -#define XGMAC_FLOW_CTRL_PT_SHIFT	16
> -#define XGMAC_FLOW_CTRL_DZQP	0x00000080	/* Disable Zero-Quanta Phase */
> -#define XGMAC_FLOW_CTRL_PLT	0x00000020	/* Pause Low Threshhold */
> -#define XGMAC_FLOW_CTRL_PLT_SHIFT	4
> -#define XGMAC_FLOW_CTRL_PLT_MASK 0x00000030	/* PLT MASK */
> -#define XGMAC_FLOW_CTRL_UP	0x00000008	/* Unicast Pause Frame Detect */
> -#define XGMAC_FLOW_CTRL_RFE	0x00000004	/* Rx Flow Control Enable */
> -#define XGMAC_FLOW_CTRL_TFE	0x00000002	/* Tx Flow Control Enable */
> -#define XGMAC_FLOW_CTRL_FCB_BPA	0x00000001	/* Flow Control Busy ... */
> -
> -/* XGMAC_INT_STAT reg */
> -#define XGMAC_INT_STAT_PMT	0x0080		/* PMT Interrupt Status */
> -#define XGMAC_INT_STAT_LPI	0x0040		/* LPI Interrupt Status */
> -
> -/* DMA Bus Mode register defines */
> -#define DMA_BUS_MODE_SFT_RESET	0x00000001	/* Software Reset */
> -#define DMA_BUS_MODE_DSL_MASK	0x0000007c	/* Descriptor Skip Length */
> -#define DMA_BUS_MODE_DSL_SHIFT	2		/* (in DWORDS) */
> -#define DMA_BUS_MODE_ATDS	0x00000080	/* Alternate Descriptor Size */
> -
> -/* Programmable burst length */
> -#define DMA_BUS_MODE_PBL_MASK	0x00003f00	/* Programmable Burst Len */
> -#define DMA_BUS_MODE_PBL_SHIFT	8
> -#define DMA_BUS_MODE_FB		0x00010000	/* Fixed burst */
> -#define DMA_BUS_MODE_RPBL_MASK	0x003e0000	/* Rx-Programmable Burst Len */
> -#define DMA_BUS_MODE_RPBL_SHIFT	17
> -#define DMA_BUS_MODE_USP	0x00800000
> -#define DMA_BUS_MODE_8PBL	0x01000000
> -#define DMA_BUS_MODE_AAL	0x02000000
> -
> -#define DMA_AXIMODE_ENLPI	0x80000000
> -#define DMA_AXIMODE_MGK		0x40000000
> -#define DMA_AXIMODE_WROSR	0x00100000
> -#define DMA_AXIMODE_WROSR_MASK	0x00F00000
> -#define DMA_AXIMODE_WROSR_SHIFT	20
> -#define DMA_AXIMODE_RDOSR	0x00010000
> -#define DMA_AXIMODE_RDOSR_MASK	0x000F0000
> -#define DMA_AXIMODE_RDOSR_SHIFT	16
> -#define DMA_AXIMODE_AAL		0x00001000
> -#define DMA_AXIMODE_BLEN256	0x00000080
> -#define DMA_AXIMODE_BLEN128	0x00000040
> -#define DMA_AXIMODE_BLEN64	0x00000020
> -#define DMA_AXIMODE_BLEN32	0x00000010
> -#define DMA_AXIMODE_BLEN16	0x00000008
> -#define DMA_AXIMODE_BLEN8	0x00000004
> -#define DMA_AXIMODE_BLEN4	0x00000002
> -#define DMA_AXIMODE_UNDEF	0x00000001
> -
> -/* DMA Bus Mode register defines */
> -#define DMA_BUS_PR_RATIO_MASK	0x0000c000	/* Rx/Tx priority ratio */
> -#define DMA_BUS_PR_RATIO_SHIFT	14
> -#define DMA_BUS_FB		0x00010000	/* Fixed Burst */
> -
> -/* DMA Control register defines */
> -#define DMA_CONTROL_ST		0x00002000	/* Start/Stop Transmission */
> -#define DMA_CONTROL_SR		0x00000002	/* Start/Stop Receive */
> -#define DMA_CONTROL_DFF		0x01000000	/* Disable flush of rx frames */
> -
> -/* DMA Normal interrupt */
> -#define DMA_INTR_ENA_NIE	0x00010000	/* Normal Summary */
> -#define DMA_INTR_ENA_AIE	0x00008000	/* Abnormal Summary */
> -#define DMA_INTR_ENA_ERE	0x00004000	/* Early Receive */
> -#define DMA_INTR_ENA_FBE	0x00002000	/* Fatal Bus Error */
> -#define DMA_INTR_ENA_ETE	0x00000400	/* Early Transmit */
> -#define DMA_INTR_ENA_RWE	0x00000200	/* Receive Watchdog */
> -#define DMA_INTR_ENA_RSE	0x00000100	/* Receive Stopped */
> -#define DMA_INTR_ENA_RUE	0x00000080	/* Receive Buffer Unavailable */
> -#define DMA_INTR_ENA_RIE	0x00000040	/* Receive Interrupt */
> -#define DMA_INTR_ENA_UNE	0x00000020	/* Tx Underflow */
> -#define DMA_INTR_ENA_OVE	0x00000010	/* Receive Overflow */
> -#define DMA_INTR_ENA_TJE	0x00000008	/* Transmit Jabber */
> -#define DMA_INTR_ENA_TUE	0x00000004	/* Transmit Buffer Unavail */
> -#define DMA_INTR_ENA_TSE	0x00000002	/* Transmit Stopped */
> -#define DMA_INTR_ENA_TIE	0x00000001	/* Transmit Interrupt */
> -
> -#define DMA_INTR_NORMAL		(DMA_INTR_ENA_NIE | DMA_INTR_ENA_RIE | \
> -				 DMA_INTR_ENA_TUE)
> -
> -#define DMA_INTR_ABNORMAL	(DMA_INTR_ENA_AIE | DMA_INTR_ENA_FBE | \
> -				 DMA_INTR_ENA_RWE | DMA_INTR_ENA_RSE | \
> -				 DMA_INTR_ENA_RUE | DMA_INTR_ENA_UNE | \
> -				 DMA_INTR_ENA_OVE | DMA_INTR_ENA_TJE | \
> -				 DMA_INTR_ENA_TSE)
> -
> -/* DMA default interrupt mask */
> -#define DMA_INTR_DEFAULT_MASK	(DMA_INTR_NORMAL | DMA_INTR_ABNORMAL)
> -
> -/* DMA Status register defines */
> -#define DMA_STATUS_GMI		0x08000000	/* MMC interrupt */
> -#define DMA_STATUS_GLI		0x04000000	/* GMAC Line interface int */
> -#define DMA_STATUS_EB_MASK	0x00380000	/* Error Bits Mask */
> -#define DMA_STATUS_EB_TX_ABORT	0x00080000	/* Error Bits - TX Abort */
> -#define DMA_STATUS_EB_RX_ABORT	0x00100000	/* Error Bits - RX Abort */
> -#define DMA_STATUS_TS_MASK	0x00700000	/* Transmit Process State */
> -#define DMA_STATUS_TS_SHIFT	20
> -#define DMA_STATUS_RS_MASK	0x000e0000	/* Receive Process State */
> -#define DMA_STATUS_RS_SHIFT	17
> -#define DMA_STATUS_NIS		0x00010000	/* Normal Interrupt Summary */
> -#define DMA_STATUS_AIS		0x00008000	/* Abnormal Interrupt Summary */
> -#define DMA_STATUS_ERI		0x00004000	/* Early Receive Interrupt */
> -#define DMA_STATUS_FBI		0x00002000	/* Fatal Bus Error Interrupt */
> -#define DMA_STATUS_ETI		0x00000400	/* Early Transmit Interrupt */
> -#define DMA_STATUS_RWT		0x00000200	/* Receive Watchdog Timeout */
> -#define DMA_STATUS_RPS		0x00000100	/* Receive Process Stopped */
> -#define DMA_STATUS_RU		0x00000080	/* Receive Buffer Unavailable */
> -#define DMA_STATUS_RI		0x00000040	/* Receive Interrupt */
> -#define DMA_STATUS_UNF		0x00000020	/* Transmit Underflow */
> -#define DMA_STATUS_OVF		0x00000010	/* Receive Overflow */
> -#define DMA_STATUS_TJT		0x00000008	/* Transmit Jabber Timeout */
> -#define DMA_STATUS_TU		0x00000004	/* Transmit Buffer Unavail */
> -#define DMA_STATUS_TPS		0x00000002	/* Transmit Process Stopped */
> -#define DMA_STATUS_TI		0x00000001	/* Transmit Interrupt */
> -
> -/* Common MAC defines */
> -#define MAC_ENABLE_TX		0x00000008	/* Transmitter Enable */
> -#define MAC_ENABLE_RX		0x00000004	/* Receiver Enable */
> -
> -/* XGMAC Operation Mode Register */
> -#define XGMAC_OMR_TSF		0x00200000	/* TX FIFO Store and Forward */
> -#define XGMAC_OMR_FTF		0x00100000	/* Flush Transmit FIFO */
> -#define XGMAC_OMR_TTC		0x00020000	/* Transmit Threshhold Ctrl */
> -#define XGMAC_OMR_TTC_SHIFT	16
> -#define XGMAC_OMR_TTC_MASK	0x00030000
> -#define XGMAC_OMR_RFD		0x00006000	/* FC Deactivation Threshhold */
> -#define XGMAC_OMR_RFD_SHIFT	12
> -#define XGMAC_OMR_RFD_MASK	0x00007000	/* FC Deact Threshhold MASK */
> -#define XGMAC_OMR_RFA		0x00000600	/* FC Activation Threshhold */
> -#define XGMAC_OMR_RFA_SHIFT	9
> -#define XGMAC_OMR_RFA_MASK	0x00000E00	/* FC Act Threshhold MASK */
> -#define XGMAC_OMR_EFC		0x00000100	/* Enable Hardware FC */
> -#define XGMAC_OMR_FEF		0x00000080	/* Forward Error Frames */
> -#define XGMAC_OMR_DT		0x00000040	/* Drop TCP/IP csum Errors */
> -#define XGMAC_OMR_RSF		0x00000020	/* RX FIFO Store and Forward */
> -#define XGMAC_OMR_RTC_256	0x00000018	/* RX Threshhold Ctrl */
> -#define XGMAC_OMR_RTC_MASK	0x00000018	/* RX Threshhold Ctrl MASK */
> -
> -/* XGMAC HW Features Register */
> -#define DMA_HW_FEAT_TXCOESEL	0x00010000	/* TX Checksum offload */
> -
> -#define XGMAC_MMC_CTRL_CNT_FRZ	0x00000008
> -
> -/* XGMAC Descriptor Defines */
> -#define MAX_DESC_BUF_SZ		(0x2000 - 8)
> -
> -#define RXDESC_EXT_STATUS	0x00000001
> -#define RXDESC_CRC_ERR		0x00000002
> -#define RXDESC_RX_ERR		0x00000008
> -#define RXDESC_RX_WDOG		0x00000010
> -#define RXDESC_FRAME_TYPE	0x00000020
> -#define RXDESC_GIANT_FRAME	0x00000080
> -#define RXDESC_LAST_SEG		0x00000100
> -#define RXDESC_FIRST_SEG	0x00000200
> -#define RXDESC_VLAN_FRAME	0x00000400
> -#define RXDESC_OVERFLOW_ERR	0x00000800
> -#define RXDESC_LENGTH_ERR	0x00001000
> -#define RXDESC_SA_FILTER_FAIL	0x00002000
> -#define RXDESC_DESCRIPTOR_ERR	0x00004000
> -#define RXDESC_ERROR_SUMMARY	0x00008000
> -#define RXDESC_FRAME_LEN_OFFSET	16
> -#define RXDESC_FRAME_LEN_MASK	0x3fff0000
> -#define RXDESC_DA_FILTER_FAIL	0x40000000
> -
> -#define RXDESC1_END_RING	0x00008000
> -
> -#define RXDESC_IP_PAYLOAD_MASK	0x00000003
> -#define RXDESC_IP_PAYLOAD_UDP	0x00000001
> -#define RXDESC_IP_PAYLOAD_TCP	0x00000002
> -#define RXDESC_IP_PAYLOAD_ICMP	0x00000003
> -#define RXDESC_IP_HEADER_ERR	0x00000008
> -#define RXDESC_IP_PAYLOAD_ERR	0x00000010
> -#define RXDESC_IPV4_PACKET	0x00000040
> -#define RXDESC_IPV6_PACKET	0x00000080
> -#define TXDESC_UNDERFLOW_ERR	0x00000001
> -#define TXDESC_JABBER_TIMEOUT	0x00000002
> -#define TXDESC_LOCAL_FAULT	0x00000004
> -#define TXDESC_REMOTE_FAULT	0x00000008
> -#define TXDESC_VLAN_FRAME	0x00000010
> -#define TXDESC_FRAME_FLUSHED	0x00000020
> -#define TXDESC_IP_HEADER_ERR	0x00000040
> -#define TXDESC_PAYLOAD_CSUM_ERR	0x00000080
> -#define TXDESC_ERROR_SUMMARY	0x00008000
> -#define TXDESC_SA_CTRL_INSERT	0x00040000
> -#define TXDESC_SA_CTRL_REPLACE	0x00080000
> -#define TXDESC_2ND_ADDR_CHAINED	0x00100000
> -#define TXDESC_END_RING		0x00200000
> -#define TXDESC_CSUM_IP		0x00400000
> -#define TXDESC_CSUM_IP_PAYLD	0x00800000
> -#define TXDESC_CSUM_ALL		0x00C00000
> -#define TXDESC_CRC_EN_REPLACE	0x01000000
> -#define TXDESC_CRC_EN_APPEND	0x02000000
> -#define TXDESC_DISABLE_PAD	0x04000000
> -#define TXDESC_FIRST_SEG	0x10000000
> -#define TXDESC_LAST_SEG		0x20000000
> -#define TXDESC_INTERRUPT	0x40000000
> -
> -#define DESC_OWN		0x80000000
> -#define DESC_BUFFER1_SZ_MASK	0x00001fff
> -#define DESC_BUFFER2_SZ_MASK	0x1fff0000
> -#define DESC_BUFFER2_SZ_OFFSET	16
> -
> -struct xgmac_dma_desc {
> -	__le32 flags;
> -	__le32 buf_size;
> -	__le32 buf1_addr;		/* Buffer 1 Address Pointer */
> -	__le32 buf2_addr;		/* Buffer 2 Address Pointer */
> -	__le32 ext_status;
> -	__le32 res[3];
> -};
> -
> -struct xgmac_priv {
> -	struct xgmac_dma_desc *rx_chain;
> -	struct xgmac_dma_desc *tx_chain;
> -	char *rxbuffer;
> -
> -	u32 tx_currdesc;
> -	u32 rx_currdesc;
> -
> -	void __iomem *base;
> -
> -	struct eth_device edev;
> -	struct device_d *dev;
> -};
> -
> -/* XGMAC Descriptor Access Helpers */
> -static inline void desc_set_buf_len(struct xgmac_dma_desc *p, u32 buf_sz)
> -{
> -	if (buf_sz > MAX_DESC_BUF_SZ)
> -		p->buf_size = cpu_to_le32(MAX_DESC_BUF_SZ |
> -			(buf_sz - MAX_DESC_BUF_SZ) << DESC_BUFFER2_SZ_OFFSET);
> -	else
> -		p->buf_size = cpu_to_le32(buf_sz);
> -}
> -
> -static inline int desc_get_buf_len(struct xgmac_dma_desc *p)
> -{
> -	u32 len = le32_to_cpu(p->buf_size);
> -	return (len & DESC_BUFFER1_SZ_MASK) +
> -		((len & DESC_BUFFER2_SZ_MASK) >> DESC_BUFFER2_SZ_OFFSET);
> -}
> -
> -static inline void desc_init_rx_desc(struct xgmac_dma_desc *p, int ring_size,
> -				     int buf_sz)
> -{
> -	struct xgmac_dma_desc *end = p + ring_size - 1;
> -
> -	memset(p, 0, sizeof(*p) * ring_size);
> -
> -	for (; p <= end; p++)
> -		desc_set_buf_len(p, buf_sz);
> -
> -	end->buf_size |= cpu_to_le32(RXDESC1_END_RING);
> -}
> -
> -static inline void desc_init_tx_desc(struct xgmac_dma_desc *p, u32 ring_size)
> -{
> -	memset(p, 0, sizeof(*p) * ring_size);
> -	p[ring_size - 1].flags = cpu_to_le32(TXDESC_END_RING);
> -}
> -
> -static inline int desc_get_owner(struct xgmac_dma_desc *p)
> -{
> -	return le32_to_cpu(p->flags) & DESC_OWN;
> -}
> -
> -static inline void desc_set_rx_owner(struct xgmac_dma_desc *p)
> -{
> -	/* Clear all fields and set the owner */
> -	p->flags = cpu_to_le32(DESC_OWN);
> -}
> -
> -static inline void desc_set_tx_owner(struct xgmac_dma_desc *p, u32 flags)
> -{
> -	u32 tmpflags = le32_to_cpu(p->flags);
> -	tmpflags &= TXDESC_END_RING;
> -	tmpflags |= flags | DESC_OWN;
> -	p->flags = cpu_to_le32(tmpflags);
> -}
> -
> -static inline void *desc_get_buf_addr(struct xgmac_dma_desc *p)
> -{
> -	return (void *)le32_to_cpu(p->buf1_addr);
> -}
> -
> -static inline void desc_set_buf_addr(struct xgmac_dma_desc *p,
> -				     void *paddr, int len)
> -{
> -	p->buf1_addr = cpu_to_le32(paddr);
> -	if (len > MAX_DESC_BUF_SZ)
> -		p->buf2_addr = cpu_to_le32(paddr + MAX_DESC_BUF_SZ);
> -}
> -
> -static inline void desc_set_buf_addr_and_size(struct xgmac_dma_desc *p,
> -					      void *paddr, int len)
> -{
> -	desc_set_buf_len(p, len);
> -	desc_set_buf_addr(p, paddr, len);
> -}
> -
> -static inline int desc_get_rx_frame_len(struct xgmac_dma_desc *p)
> -{
> -	u32 data = le32_to_cpu(p->flags);
> -	u32 len = (data & RXDESC_FRAME_LEN_MASK) >> RXDESC_FRAME_LEN_OFFSET;
> -	if (data & RXDESC_FRAME_TYPE)
> -		len -= 4;
> -
> -	return len;
> -}
> -
> -/*
> - * Initialize a descriptor ring.  Calxeda XGMAC is configured to use
> - * advanced descriptors.
> - */
> -
> -static void init_rx_desc(struct xgmac_priv *priv)
> -{
> -	struct xgmac_dma_desc *rxdesc = priv->rx_chain;
> -	void *rxbuffer = priv->rxbuffer;
> -	int i;
> -
> -	desc_init_rx_desc(rxdesc, RX_NUM_DESC, ETH_BUF_SZ);
> -	writel((ulong)rxdesc, priv->base + XGMAC_DMA_RX_BASE_ADDR);
> -
> -	for (i = 0; i < RX_NUM_DESC; i++) {
> -		desc_set_buf_addr(rxdesc + i, rxbuffer + (i * ETH_BUF_SZ),
> -				  ETH_BUF_SZ);
> -		desc_set_rx_owner(rxdesc + i);
> -	}
> -}
> -
> -static void init_tx_desc(struct xgmac_priv *priv)
> -{
> -	desc_init_tx_desc(priv->tx_chain, TX_NUM_DESC);
> -	writel((ulong)priv->tx_chain, priv->base + XGMAC_DMA_TX_BASE_ADDR);
> -}
> -
> -static int xgmac_reset(struct eth_device *dev)
> -{
> -	struct xgmac_priv *priv = dev->priv;
> -	int ret;
> -	u32 value;
> -
> -	value = readl(priv->base + XGMAC_CONTROL) & XGMAC_CONTROL_SPD_MASK;
> -
> -	writel(DMA_BUS_MODE_SFT_RESET, priv->base + XGMAC_DMA_BUS_MODE);
> -
> -	ret = wait_on_timeout(100 * MSECOND,
> -		!(readl(priv->base + XGMAC_DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET));
> -
> -	writel(value, priv->base + XGMAC_CONTROL);
> -
> -	return ret;
> -}
> -
> -static int xgmac_open(struct eth_device *edev)
> -{
> -	struct xgmac_priv *priv = edev->priv;
> -	int value;
> -	int ret;
> -
> -	ret = xgmac_reset(edev);
> -	if (ret)
> -		return ret;
> -
> -	/* set the AXI bus modes */
> -	value = DMA_BUS_MODE_ATDS |
> -		(16 << DMA_BUS_MODE_PBL_SHIFT) |
> -		DMA_BUS_MODE_FB | DMA_BUS_MODE_AAL;
> -	writel(value, priv->base + XGMAC_DMA_BUS_MODE);
> -
> -	value = DMA_AXIMODE_AAL | DMA_AXIMODE_BLEN16 |
> -		DMA_AXIMODE_BLEN8 | DMA_AXIMODE_BLEN4;
> -	writel(value, priv->base + XGMAC_DMA_AXI_BUS);
> -
> -	/* set flow control parameters and store and forward mode */
> -	value = (FIFO_MINUS_12K << XGMAC_OMR_RFD_SHIFT) |
> -		(FIFO_MINUS_4K << XGMAC_OMR_RFA_SHIFT) |
> -		XGMAC_OMR_EFC | XGMAC_OMR_TSF | XGMAC_OMR_RSF;
> -	writel(value, priv->base + XGMAC_OMR);
> -
> -	/* enable pause frames */
> -	value = (1024 << XGMAC_FLOW_CTRL_PT_SHIFT) |
> -		(1 << XGMAC_FLOW_CTRL_PLT_SHIFT) |
> -		XGMAC_FLOW_CTRL_UP | XGMAC_FLOW_CTRL_RFE | XGMAC_FLOW_CTRL_TFE;
> -	writel(value, priv->base + XGMAC_FLOW_CTRL);
> -
> -	/* Initialize the descriptor chains */
> -	init_rx_desc(priv);
> -	init_tx_desc(priv);
> -
> -	/* must set to 0, or when started up will cause issues */
> -	priv->tx_currdesc = 0;
> -	priv->rx_currdesc = 0;
> -
> -	/* set default core values */
> -	value = readl(priv->base + XGMAC_CONTROL);
> -	value &= XGMAC_CONTROL_SPD_MASK;
> -	value |= XGMAC_CONTROL_DDIC | XGMAC_CONTROL_ACS |
> -		XGMAC_CONTROL_IPC | XGMAC_CONTROL_CAR;
> -
> -	/* Everything is ready enable both mac and DMA */
> -	value |= XGMAC_CONTROL_RE | XGMAC_CONTROL_TE;
> -	writel(value, priv->base + XGMAC_CONTROL);
> -
> -	value = readl(priv->base + XGMAC_DMA_CONTROL);
> -	value |= DMA_CONTROL_SR | DMA_CONTROL_ST;
> -	writel(value, priv->base + XGMAC_DMA_CONTROL);
> -
> -	return 0;
> -}
> -
> -static int xgmac_send(struct eth_device *edev, void *packet, int length)
> -{
> -	struct xgmac_priv *priv = edev->priv;
> -	u32 currdesc = priv->tx_currdesc;
> -	struct xgmac_dma_desc *txdesc = &priv->tx_chain[currdesc];
> -	int ret;
> -
> -	dma_sync_single_for_device((unsigned long)packet, length, DMA_TO_DEVICE);
> -	desc_set_buf_addr_and_size(txdesc, packet, length);
> -	desc_set_tx_owner(txdesc, TXDESC_FIRST_SEG |
> -		TXDESC_LAST_SEG | TXDESC_CRC_EN_APPEND);
> -
> -	/* write poll demand */
> -	writel(1, priv->base + XGMAC_DMA_TX_POLL);
> -
> -	ret = wait_on_timeout(1 * SECOND, !desc_get_owner(txdesc));
> -	dma_sync_single_for_cpu((unsigned long)packet, length, DMA_TO_DEVICE);
> -	if (ret) {
> -		dev_err(priv->dev, "TX timeout\n");
> -		return ret;
> -	}
> -
> -	priv->tx_currdesc = (currdesc + 1) & (TX_NUM_DESC - 1);
> -	return 0;
> -}
> -
> -static int xgmac_recv(struct eth_device *edev)
> -{
> -	struct xgmac_priv *priv = edev->priv;
> -	u32 currdesc = priv->rx_currdesc;
> -	struct xgmac_dma_desc *rxdesc = &priv->rx_chain[currdesc];
> -	int length = 0;
> -	void *buf_addr;
> -
> -	/* check if the host has the desc */
> -	if (desc_get_owner(rxdesc))
> -		return -1; /* something bad happened */
> -
> -	length = desc_get_rx_frame_len(rxdesc);
> -	buf_addr = desc_get_buf_addr(rxdesc);
> -
> -	dma_sync_single_for_cpu((unsigned long)buf_addr, length, DMA_FROM_DEVICE);
> -	net_receive(edev, buf_addr, length);
> -	dma_sync_single_for_device((unsigned long)buf_addr, length,
> -				   DMA_FROM_DEVICE);
> -
> -	/* set descriptor back to owned by XGMAC */
> -	desc_set_rx_owner(rxdesc);
> -	writel(1, priv->base + XGMAC_DMA_RX_POLL);
> -
> -	priv->rx_currdesc = (currdesc + 1) & (RX_NUM_DESC - 1);
> -
> -	return length;
> -}
> -
> -static void xgmac_halt(struct eth_device *edev)
> -{
> -	struct xgmac_priv *priv = edev->priv;
> -	int value;
> -
> -	/* Disable TX/RX */
> -	value = readl(priv->base + XGMAC_CONTROL);
> -	value &= ~(XGMAC_CONTROL_RE | XGMAC_CONTROL_TE);
> -	writel(value, priv->base + XGMAC_CONTROL);
> -
> -	/* Disable DMA */
> -	value = readl(priv->base + XGMAC_DMA_CONTROL);
> -	value &= ~(DMA_CONTROL_SR | DMA_CONTROL_ST);
> -	writel(value, priv->base + XGMAC_DMA_CONTROL);
> -
> -	/* must set to 0, or when started up will cause issues */
> -	priv->tx_currdesc = 0;
> -	priv->rx_currdesc = 0;
> -}
> -
> -static int xgmac_get_ethaddr(struct eth_device *edev, unsigned char *addr)
> -{
> -	struct xgmac_priv *priv = edev->priv;
> -	u32 hi_addr, lo_addr;
> -
> -	/* Read the MAC address from the hardware */
> -	hi_addr = readl(priv->base + XGMAC_ADDR_HIGH(0));
> -	lo_addr = readl(priv->base + XGMAC_ADDR_LOW(0));
> -
> -	/* Extract the MAC address from the high and low words */
> -	addr[0] = lo_addr & 0xff;
> -	addr[1] = (lo_addr >> 8) & 0xff;
> -	addr[2] = (lo_addr >> 16) & 0xff;
> -	addr[3] = (lo_addr >> 24) & 0xff;
> -	addr[4] = hi_addr & 0xff;
> -	addr[5] = (hi_addr >> 8) & 0xff;
> -
> -	return 0;
> -}
> -
> -static int xgmac_set_ethaddr(struct eth_device *dev, const unsigned char *addr)
> -{
> -	struct xgmac_priv *priv = dev->priv;
> -	u32 data;
> -
> -	data = (addr[5] << 8) | addr[4];
> -	writel(data, priv->base + XGMAC_ADDR_HIGH(0));
> -	data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0];
> -	writel(data, priv->base + XGMAC_ADDR_LOW(0));
> -
> -	return 0;
> -}
> -
> -static int hb_xgmac_probe(struct device_d *dev)
> -{
> -	struct resource *iores;
> -	struct eth_device *edev;
> -	struct xgmac_priv *priv;
> -	void __iomem *base;
> -
> -	iores = dev_request_mem_resource(dev, 0);
> -	if (IS_ERR(iores))
> -		return PTR_ERR(iores);
> -	base = IOMEM(iores->start);
> -
> -	/* check hardware version */
> -	if (readl(base + XGMAC_VERSION) != 0x1012)
> -		return -EINVAL;
> -
> -	priv = xzalloc(sizeof(*priv));
> -
> -	priv->dev = dev;
> -	priv->base = base;
> -
> -	priv->rxbuffer = dma_alloc_coherent(RX_BUF_SZ, DMA_ADDRESS_BROKEN);
> -	priv->rx_chain = dma_alloc_coherent(RX_NUM_DESC * sizeof(struct xgmac_dma_desc),
> -					    DMA_ADDRESS_BROKEN);
> -	priv->tx_chain = dma_alloc_coherent(TX_NUM_DESC * sizeof(struct xgmac_dma_desc),
> -					    DMA_ADDRESS_BROKEN);
> -
> -	edev = &priv->edev;
> -	edev->priv = priv;
> -
> -	edev->open = xgmac_open;
> -	edev->send = xgmac_send;
> -	edev->recv = xgmac_recv;
> -	edev->halt = xgmac_halt;
> -	edev->get_ethaddr = xgmac_get_ethaddr;
> -	edev->set_ethaddr = xgmac_set_ethaddr;
> -	edev->parent = dev;
> -
> -	eth_register(edev);
> -
> -	return 0;
> -}
> -
> -static __maybe_unused struct of_device_id xgmac_dt_ids[] = {
> -	{
> -		.compatible = "calxeda,hb-xgmac",
> -	}, {
> -		/* sentinel */
> -	}
> -};
> -
> -static struct driver_d hb_xgmac_driver = {
> -	.name  = "hb-xgmac",
> -	.probe = hb_xgmac_probe,
> -	.of_compatible = DRV_OF_COMPAT(xgmac_dt_ids),
> -};
> -device_platform_driver(hb_xgmac_driver);
> 


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux