On 21-08-11 20:30, Ahmad Fatoum wrote: > On 11.08.21 19:36, Marco Felsch wrote: > > The problem with the BootROM is that the SCR registers are not set > > s/SCR/SRC/ ? of course :) > > accordingly in case of a failed primary boot. E.g. if the device is > > configured to boot from an eMMC and the eMMC is empty or image is > > corrupt, the BootROM goes into 'recovery boot mode' (reference manual > > Figure 8-1) and the last possible recovery option is the serial > > downloader. In such case the SRC registers still indicate that the > > device was booted from an eMMC instead of serial-download. > > > > This commit ports the U-Boot commit [1] with slightly adaptions suggested > > by Ahmad to Barebox. Also we need to reorder the imx6_init() else we > > reset the otg-controller to early. > > > > [1] https://source.denx.de/u-boot/u-boot/-/commit/e203dcf23e9eabc2e4f3d0b079457cd1516f2081 > > > > Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx> > > --- > > arch/arm/mach-imx/boot.c | 27 +++++++++++++++++++++++++++ > > arch/arm/mach-imx/imx6.c | 4 ++-- > > include/soc/fsl/fsl_udc.h | 11 +++++++++++ > > 3 files changed, 40 insertions(+), 2 deletions(-) > > > > diff --git a/arch/arm/mach-imx/boot.c b/arch/arm/mach-imx/boot.c > > index 2b66bbf71e..fcb3c10064 100644 > > --- a/arch/arm/mach-imx/boot.c > > +++ b/arch/arm/mach-imx/boot.c > > @@ -8,6 +8,7 @@ > > #include <magicvar.h> > > > > #include <io.h> > > +#include <mach/clock-imx6.h> > > #include <mach/generic.h> > > #include <mach/imx25-regs.h> > > #include <mach/imx27-regs.h> > > @@ -23,6 +24,7 @@ > > #include <mach/imx8mq.h> > > #include <mach/imx6.h> > > > > +#include <soc/fsl/fsl_udc.h> > > > > static void > > imx_boot_save_loc(void (*get_boot_source)(enum bootsource *, int *)) > > @@ -397,6 +399,11 @@ static u32 imx6_get_src_boot_mode(void __iomem *src_base) > > return readl(src_base + IMX6_SRC_SBMR1); > > } > > > > +static inline bool imx6_usboh3_clk_active(void) > > +{ > > + return (readl(MXC_CCM_CCGR6) & 0x3) == 0x3; > > +} > > + > > void imx6_get_boot_source(enum bootsource *src, int *instance) > > { > > void __iomem *src_base = IOMEM(MX6_SRC_BASE_ADDR); > > @@ -410,6 +417,26 @@ void imx6_get_boot_source(enum bootsource *src, int *instance) > > > > bootsrc = imx53_bootsource_internal(bootmode); > > > > + /* > > + * imx6_bootsource_serial() can't detect cases where the boot ROM > > + * decided to use the serial downloader as a fall back (primary > > + * boot source failed). > > + * > > + * Infer that the boot ROM used the USB serial downloader by > > + * checking whether both the UDC and the clock enabling access > > + * to its MMIO region are currently active... > > + * This assumes: > > + * - On fresh boots, PBL doesn't itself start a stopped UDC > > + * - In barebox proper, boot source is saved before the UDC driver > > + * may enable the UDC > > + */ > > + > > + if (imx6_usboh3_clk_active() && > > + is_chipidea_udc_running(IOMEM(MX6_OTG_BASE_ADDR))) { > > + *src = BOOTSOURCE_SERIAL; > > + return; > > + } > > + > > if (imx6_bootsource_serial(sbmr2) || > > imx6_bootsource_serial_forced(bootsrc)) { > > *src = BOOTSOURCE_SERIAL; > > diff --git a/arch/arm/mach-imx/imx6.c b/arch/arm/mach-imx/imx6.c > > index 9ccb391384..fa4cb093c3 100644 > > --- a/arch/arm/mach-imx/imx6.c > > +++ b/arch/arm/mach-imx/imx6.c > > @@ -205,10 +205,10 @@ int imx6_init(void) > > void __iomem *src = IOMEM(MX6_SRC_BASE_ADDR); > > u64 mx6_uid; > > > > - imx6_init_lowlevel(); > > - > > imx6_boot_save_loc(); > > > > + imx6_init_lowlevel(); > > A comment inside imx6_init_lowlevel hinting at the dependency w.r.t > imx6_boot_save_loc would be nice. Make sense. Regards, Marco > Apart from these nitpicks: > > Reviewed-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> > > > + > > mx6_silicon_revision = imx6_cpu_revision(); > > mx6_uid = imx6_uid(); > > > > diff --git a/include/soc/fsl/fsl_udc.h b/include/soc/fsl/fsl_udc.h > > index b983f714c5..0b409a9f6b 100644 > > --- a/include/soc/fsl/fsl_udc.h > > +++ b/include/soc/fsl/fsl_udc.h > > @@ -1,6 +1,9 @@ > > #ifndef __FSL_UDC_H > > #define __FSL_UDC_H > > > > +#include <linux/types.h> > > +#include <io.h> > > + > > /* USB DR device mode registers (Little Endian) */ > > struct usb_dr_device { > > /* Capability register */ > > @@ -380,4 +383,12 @@ int imx_barebox_start_usb(void __iomem *dr, void *dest); > > int imx8mm_barebox_load_usb(void *dest); > > int imx8mm_barebox_start_usb(void *dest); > > > > +static inline bool is_chipidea_udc_running(void __iomem *dr) > > +{ > > + struct usb_dr_device __iomem *dr_regs = dr; > > + > > + return (readl(&dr_regs->usbmode) & USB_MODE_CTRL_MODE_DEVICE) > > + && (readl(&dr_regs->usbcmd) & USB_CMD_RUN_STOP); > > +} > > + > > #endif /* __FSL_UDC_H */ > > > > > -- > Pengutronix e.K. | | > Steuerwalder Str. 21 | http://www.pengutronix.de/ | > 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox