Hi, On 23.06.21 09:52, Michael Riesch wrote: > This commit adds support for the Successive Approximation Register (SAR) > ADCs that can be found in Rockchip SoCs, such as the RK3568. > > Signed-off-by: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx> > --- > v2: > - fix timeout loop > - remove spurious debug output > - revise reference voltage handling > - add handling of clocks > > drivers/aiodev/Kconfig | 7 ++ > drivers/aiodev/Makefile | 1 + > drivers/aiodev/rockchip_saradc.c | 206 +++++++++++++++++++++++++++++++ > 3 files changed, 214 insertions(+) > create mode 100644 drivers/aiodev/rockchip_saradc.c > > diff --git a/drivers/aiodev/Kconfig b/drivers/aiodev/Kconfig > index 88d013aad..98223a8f9 100644 > --- a/drivers/aiodev/Kconfig > +++ b/drivers/aiodev/Kconfig > @@ -50,4 +50,11 @@ config STM32_ADC > Support for ADC on STM32. Supports simple one-shot readings > rather than continuous sampling with DMA, etc. ADC channels should be > configured via device tree, using the kernel bindings. > + > +config ROCKCHIP_SARADC > + tristate "Rockchip SARADC driver" > + depends on ARCH_RK3568 Please change to depends on ARCH_RK3568 || COMPILE_TEST depends on OFDEVICE That way, this driver can be built with static analyzers for other architectures as well. > + help > + Support for Successive Approximation Register (SAR) ADC in Rockchip > + SoCs. > endif > diff --git a/drivers/aiodev/Makefile b/drivers/aiodev/Makefile > index 52652f67b..1b480f6fa 100644 > --- a/drivers/aiodev/Makefile > +++ b/drivers/aiodev/Makefile > @@ -6,3 +6,4 @@ obj-$(CONFIG_MC13XXX_ADC) += mc13xxx_adc.o > obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o > obj-$(CONFIG_AM335X_ADC) += am335x_adc.o > obj-$(CONFIG_STM32_ADC) += stm32-adc.o stm32-adc-core.o > +obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o > diff --git a/drivers/aiodev/rockchip_saradc.c b/drivers/aiodev/rockchip_saradc.c > new file mode 100644 > index 000000000..ae842eb1f > --- /dev/null > +++ b/drivers/aiodev/rockchip_saradc.c > @@ -0,0 +1,206 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2021, WolfVision GmbH > + * Author: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx> > + * > + * Originally based on the Linux kernel v5.12 drivers/iio/adc/rockchip-saradc.c. > + */ > + > +#include <common.h> > +#include <aiodev.h> > +#include <linux/clk.h> > +#include <regulator.h> > + > +#define SARADC_DATA 0x00 > + > +#define SARADC_CTRL 0x08 > +#define SARADC_CTRL_IRQ_STATUS (1 << 6) > +#define SARADC_CTRL_IRQ_ENABLE (1 << 5) > +#define SARADC_CTRL_POWER_CTRL (1 << 3) > +#define SARADC_CTRL_CHN_MASK 0x07 > + > +#define SARADC_DLY_PU_SOC 0x0c > + > +#define SARADC_TIMEOUT 100 /* ms */ Nitpick: SARADC_TIMEOUT_NS (100 * MSECOND) Makes it harder to misuse. > + > +struct rockchip_saradc_cfg { > + unsigned int num_bits; > + unsigned int num_channels; > +}; > + > +struct rockchip_saradc_data { > + const struct rockchip_saradc_cfg *config; > + void __iomem *base; > + struct regulator *vref; > + unsigned int ref_voltage_mv; > + struct clk *cclk; > + struct clk *pclk; > + struct aiodevice aiodev; > + struct aiochannel *channels; > +}; > + > +static inline void rockchip_saradc_reg_wr(struct rockchip_saradc_data *data, > + u32 value, u32 reg) > +{ > + writel(value, data->base + reg); > +} > + > +static inline u32 rockchip_saradc_reg_rd(struct rockchip_saradc_data *data, > + u32 reg) > +{ > + return readl(data->base + reg); > +} > + > +static int rockchip_saradc_read(struct aiochannel *chan, int *val) > +{ > + struct rockchip_saradc_data *data; > + u32 value = 0; > + u32 control = 0; > + u32 mask; > + u64 start; > + > + if (!chan || !val) > + return -EINVAL; You don't ever see chan == NULL here, so the check isn't needed. A buggy aiodev user can indeed pass val == NULL, but they could pass (void *)1 as well and you would be none the wiser. It's expected, you are passed valid pointers here, so the checks can be dropped. > + > + data = container_of(chan->aiodev, struct rockchip_saradc_data, aiodev); > + if (!data) > + return -EINVAL; container_of can't fail. It's just pointer arithmetic. > + > + rockchip_saradc_reg_wr(data, 8, SARADC_DLY_PU_SOC); > + rockchip_saradc_reg_wr(data, > + (chan->index & SARADC_CTRL_CHN_MASK) | > + SARADC_CTRL_IRQ_ENABLE | > + SARADC_CTRL_POWER_CTRL, > + SARADC_CTRL); > + > + start = get_time_ns(); > + do { > + control = rockchip_saradc_reg_rd(data, SARADC_CTRL); > + > + if (is_timeout(start, SARADC_TIMEOUT * MSECOND)) > + return -ETIMEDOUT; > + } while (!(control & SARADC_CTRL_IRQ_STATUS)); > + > + mask = (1 << data->config->num_bits) - 1; > + value = rockchip_saradc_reg_rd(data, SARADC_DATA) & mask; > + rockchip_saradc_reg_wr(data, 0, SARADC_CTRL); > + > + *val = (value * data->ref_voltage_mv) / mask; > + > + return 0; > +} > + > +static int rockchip_saradc_probe(struct device_d *dev) > +{ > + struct rockchip_saradc_data *data; > + int i, ret; > + > + data = xzalloc(sizeof(struct rockchip_saradc_data)); > + if (!data) > + return -ENOMEM; Allocator functions starting with x panic barebox, so data is always != NULL if they succeed. For big, frequent allocations calloc can be used instead, which also zeroes, but fails with return NULL. For small one-time allocations xzalloc is ok, but there is no point in checking its return value. > + > + data->config = device_get_match_data(dev); > + if (!data->config) { Nitpick: This can't ever happen. > + ret = -EINVAL; > + goto fail_data; > + } > + data->aiodev.hwdev = dev; > + data->aiodev.read = rockchip_saradc_read; > + > + data->base = dev_request_mem_region(dev, 0); > + if (IS_ERR(data->base)) { > + ret = PTR_ERR(data->base); > + goto fail_data; > + } > + > + data->vref = regulator_get(dev, "vref"); > + if (IS_ERR(data->vref)) { > + dev_err(dev, "can't get vref-supply: %pe\n", data->vref); > + ret = PTR_ERR(data->vref); > + goto fail_data; Nitpick: You don't release the memory region you requested above. So if you fail to get the regulator here and the probe is deferred, you won't be able to reach this point here again as the second request for memory would fail without releasing the first. Quite a few drivers don't care about this failure mode, but given that you take care to free your allocations, you may want to revert the others operations you do as well. > + } > + > + ret = regulator_enable(data->vref); > + if (ret < 0) { > + dev_err(dev, "can't enable vref-supply value: %d\n", ret); > + goto fail_data; > + } > + > + ret = regulator_get_voltage(data->vref); > + if (ret < 0) { > + dev_warn(dev, "can't get vref-supply value: %d\n", ret); > + /* use default value as fallback */ > + ret = 1800000; > + } > + data->ref_voltage_mv = ret / 1000; > + > + data->cclk = clk_get(dev, "saradc"); > + if (IS_ERR(data->cclk)) { > + dev_err(dev, "can't get converter clock: %pe\n", data->cclk); > + ret = PTR_ERR(data->cclk); > + goto fail_data; > + } > + > + ret = clk_enable(data->cclk); > + if (ret < 0) { > + dev_err(dev, "can't enable converter clock: %d\n", ret); > + goto fail_data; > + } > + > + data->pclk = clk_get(dev, "apb_pclk"); > + if (IS_ERR(data->pclk)) { > + dev_err(dev, "can't get peripheral clock: %pe\n", data->pclk); > + ret = PTR_ERR(data->pclk); > + goto fail_data; > + } > + > + ret = clk_enable(data->pclk); > + if (ret < 0) { > + dev_err(dev, "can't enable peripheral clk: %d\n", ret); FYI, you can have ERR_PTR(ret) here with %pe, to get an error string. > + goto fail_data; > + } Nitpick: There is also clk_bulk_get and clk_bulk_enable to handle multiple clocks at once, but for only two clocks, it's ok to do it separately. > + > + data->aiodev.num_channels = data->config->num_channels; > + data->channels = > + xzalloc(sizeof(*data->channels) * data->aiodev.num_channels); > + data->aiodev.channels = xmalloc(sizeof(*data->aiodev.channels) * > + data->aiodev.num_channels); > + for (i = 0; i < data->aiodev.num_channels; i++) { > + data->aiodev.channels[i] = &data->channels[i]; > + data->channels[i].unit = "mV"; > + } > + > + rockchip_saradc_reg_wr(data, 0, SARADC_CTRL); > + > + ret = aiodevice_register(&data->aiodev); > + if (ret) > + goto fail_channels; > + > + dev_info(dev, "registered as %s\n", dev_name(&data->aiodev.dev)); > + return 0; > + > +fail_channels: > + kfree(data->channels); > + kfree(data->aiodev.channels); > + > +fail_data: > + kfree(data); > + return ret; > +} > + > +static const struct rockchip_saradc_cfg rk3568_saradc_cfg = { > + .num_bits = 10, > + .num_channels = 8, > +}; > + > +static const struct of_device_id of_rockchip_saradc_match[] = { > + { .compatible = "rockchip,rk3568-saradc", .data = &rk3568_saradc_cfg }, > + { /* end */ } > +}; > + > +static struct driver_d rockchip_saradc_driver = { > + .name = "rockchip_saradc", > + .probe = rockchip_saradc_probe, > + .of_compatible = DRV_OF_COMPAT(of_rockchip_saradc_match), > +}; > +device_platform_driver(rockchip_saradc_driver); > -- > 2.20.1 > > _______________________________________________ > barebox mailing list > barebox@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/barebox > -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox