[PATCH v2 0/4] Rockchip eqos support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This adds Rockchip support to the designware eqos driver.

Changes since v1:
- Honour GPIO flags in snps,reset-gpio properties
- Add support for putting phy reset gpio properties into the phy node

Sascha Hauer (4):
  gpio: allow -gpio suffix for gpio property names
  net: designware: eqos: reset phy
  net: designware: eqos: set mdio bus device node
  net: eqos: Rockchip support

 drivers/gpio/gpiolib.c            |  30 ++-
 drivers/net/Kconfig               |   6 +
 drivers/net/Makefile              |   1 +
 drivers/net/designware_eqos.c     |  29 +++
 drivers/net/designware_rockchip.c | 311 ++++++++++++++++++++++++++++++
 drivers/of/of_gpio.c              |   7 +
 6 files changed, 375 insertions(+), 9 deletions(-)
 create mode 100644 drivers/net/designware_rockchip.c

-- 
2.29.2


_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux