Re: [PATCH] scripts: imx: add support for additional hab Blocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Denis,

On Thu, Mar 11, 2021 at 05:07:20PM +0000, Denis Osterland-Heim wrote:
> From: Denis Osterland-Heim <Denis.Osterland@xxxxxxxxx>
> 
> This allows to specifiy additional singed blocks
> in the format `offset+size@address` within the imximg.
> 
> It is needed by the uuu tool, which loads the image different to
> the imx-usb-loader. It loads the DCD always to 0x910000 in the OCRAM.
> So this area have to be signed as well.
> 
> In my case this needs `hab_blocks 0x42c+0x1f0@0x910000`.
> 
> It supports to remove quotes to support Kconfig variable here.
> 
> Signed-off-by: Denis Osterland-Heim <Denis.Osterland@xxxxxxxxx>
> ---
>  scripts/imx/imx.c | 62 +++++++++++++++++++++++++++++++++++++++++++++--
>  1 file changed, 60 insertions(+), 2 deletions(-)
> 
> diff --git a/scripts/imx/imx.c b/scripts/imx/imx.c
> index 6b8dabd04..d37e200ca 100644
> --- a/scripts/imx/imx.c
> +++ b/scripts/imx/imx.c
> @@ -328,6 +328,7 @@ static int do_hab_blocks(struct config_data *data, int argc, char *argv[])
>  {
>  char *str;
>  int ret;
> +int i;
>  uint32_t signed_size = data->load_size;
>  uint32_t offset = data->image_ivt_offset;
> 
> @@ -352,7 +353,7 @@ static int do_hab_blocks(struct config_data *data, int argc, char *argv[])
>  }
> 
>  if (signed_size > 0) {
> -ret = asprintf(&str, "Blocks = 0x%08x 0x%08x 0x%08x \"%s\"\n",
> +ret = asprintf(&str, "Blocks = 0x%08x 0x%08x 0x%08x \"%s\"",
>  data->image_load_addr + data->image_ivt_offset, offset,
>  signed_size - data->image_ivt_offset, data->outfile);
>  } else {
> @@ -365,10 +366,67 @@ static int do_hab_blocks(struct config_data *data, int argc, char *argv[])
>  return -ENOMEM;
> 
>  ret = hab_add_str(data, str);
> +free(str);
>  if (ret)
>  return ret;
> 
> -return 0;
> +for (i = 1; i < argc; i++)
> +{

Ciding style: The open brace should be on previous line.

> +uint32_t addr;
> +uint32_t off;
> +uint32_t size;
> +char *b;
> +char *e;
> +
> +b = argv[i];
> +if (b[0] == '"') // remove qoutes
> +{
> +b++;
> +for (e = b; *e; e++)
> +/* find end of string */;
> +e--;
> +if (*e == '"')
> +*e = '\0';

To make this less efficient but better readable, how about:

e = b + strlen(b) - 1?

Note this fails when 'b' is an empty string, but your version fails
there as well. It needs an additional check.

> +else
> +fprintf(stderr, "warning: no '\"' at the end of '%s' [b=%p'%s', e=%p'%s']\n", argv[i], b, b, e, e);
> +}
> +if (!*b)
> +continue; // skip if empty
> +
> +e = strchr(b, '+');
> +if (!e)
> +{
> +fprintf(stderr, "failed to find '+' in '%s'\n", b);
> +fprintf(stderr, "format off+size@addr expected, but given: %s\n", argv[i]);
> +return -EINVAL;
> +}
> +*e = '\0';
> +off = strtoul(b, NULL, 0);

No need to set the place where the '+' is to zero. You can do it like
this:

	char *plus;

	off = strtoul(b, &plus, 0);

	if (*plus != '+')
		/* complain */


> +
> +b = e + 1;
> +e = strchr(b, '@');
> +if (!e)
> +{
> +fprintf(stderr, "failed to find '@' in '%s'\n", b);
> +fprintf(stderr, "format off+size@addr expected, but given: %s", argv[i]);
> +return -EINVAL;
> +}
> +*e = '\0';
> +size = strtoul(b, NULL, 0);

Same here.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux