[PATCH] dts: zcu104: remove unnecessary ZynqMP clock dtsi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The clock definitions are now available from the Linux device tree as
dts/src/arm64/xilinx/zynqmp-clk-ccf.dtsi and the clock-controller is
defined in dts/src/arm64/xilinx/zynqmp.dtsi. Defining the clocks in a
Barebox-specific file is not necessary anymore.

Remove zynqmp-clk.dtsi and the include from the board device tree.

The files are already correctly included by the imported board device
trees (dts/src/arm64/xilinx/zynqmp-zcu104-revA.dts).

Signed-off-by: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
---
 arch/arm/dts/zynqmp-clk.dtsi        | 155 ----------------------------
 arch/arm/dts/zynqmp-zcu104-revA.dts |   1 -
 2 files changed, 156 deletions(-)
 delete mode 100644 arch/arm/dts/zynqmp-clk.dtsi

diff --git a/arch/arm/dts/zynqmp-clk.dtsi b/arch/arm/dts/zynqmp-clk.dtsi
deleted file mode 100644
index 68ece9aa6732..000000000000
--- a/arch/arm/dts/zynqmp-clk.dtsi
+++ /dev/null
@@ -1,155 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Clock specification for Xilinx ZynqMP
- *
- * (C) Copyright 2017, Xilinx, Inc.
- *
- * Michal Simek <michal.simek@xxxxxxxxxx>
- */
-
-#include <dt-bindings/clock/xlnx-zynqmp-clk.h>
-
-&zynqmp_firmware {
-       zynqmp_clk: clock-controller {
-               #clock-cells = <1>;
-               compatible = "xlnx,zynqmp-clk";
-               clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <&gt_crx_ref_clk>;
-               clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk", "aux_ref_clk", "gt_crx_ref_clk";
-       };
-};
-
-/ {
-	pss_ref_clk: pss_ref_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <33333333>;
-	};
-
-	video_clk: video_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <27000000>;
-	};
-
-	pss_alt_ref_clk: pss_alt_ref_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-
-	gt_crx_ref_clk: gt_crx_ref_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <108000000>;
-	};
-
-	aux_ref_clk: aux_ref_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <27000000>;
-	};
-};
-
-&can0 {
-	clocks = <&zynqmp_clk CAN0_REF>, <&zynqmp_clk LPD_LSBUS>;
-};
-
-&can1 {
-	clocks = <&zynqmp_clk CAN1_REF>, <&zynqmp_clk LPD_LSBUS>;
-};
-
-&cpu0 {
-	clocks = <&zynqmp_clk ACPU>;
-};
-
-&gem0 {
-	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_TX>, <&zynqmp_clk GEM0_REF>, <&zynqmp_clk GEM_TSU>;
-	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-};
-
-&gem1 {
-	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_REF>, <&zynqmp_clk GEM_TSU>;
-	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-};
-
-&gem2 {
-	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM2_TX>, <&zynqmp_clk GEM2_REF>, <&zynqmp_clk GEM_TSU>;
-	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-};
-
-&gem3 {
-	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM3_TX>, <&zynqmp_clk GEM3_REF>, <&zynqmp_clk GEM_TSU>;
-	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-};
-
-&gpio {
-	clocks = <&zynqmp_clk LPD_LSBUS>;
-};
-
-&i2c0 {
-	clocks = <&zynqmp_clk I2C0_REF>;
-};
-
-&i2c1 {
-	clocks = <&zynqmp_clk I2C1_REF>;
-};
-
-&pcie {
-	clocks = <&zynqmp_clk PCIE_REF>;
-};
-
-&sata {
-	clocks = <&zynqmp_clk SATA_REF>;
-};
-
-&sdhci0 {
-	clocks = <&zynqmp_clk SDIO0_REF>, <&zynqmp_clk LPD_LSBUS>;
-};
-
-&sdhci1 {
-	clocks = <&zynqmp_clk SDIO1_REF>, <&zynqmp_clk LPD_LSBUS>;
-};
-
-&spi0 {
-	clocks = <&zynqmp_clk SPI0_REF>, <&zynqmp_clk LPD_LSBUS>;
-};
-
-&spi1 {
-	clocks = <&zynqmp_clk SPI0_REF>, <&zynqmp_clk LPD_LSBUS>;
-};
-
-&ttc0 {
-	clocks = <&zynqmp_clk LPD_LSBUS>;
-};
-
-&ttc1 {
-	clocks = <&zynqmp_clk LPD_LSBUS>;
-};
-
-&ttc2 {
-	clocks = <&zynqmp_clk LPD_LSBUS>;
-};
-
-&ttc3 {
-	clocks = <&zynqmp_clk LPD_LSBUS>;
-};
-
-&uart0 {
-	clocks = <&zynqmp_clk UART0_REF>, <&zynqmp_clk LPD_LSBUS>;
-};
-
-&uart1 {
-	clocks = <&zynqmp_clk UART1_REF>, <&zynqmp_clk LPD_LSBUS>;
-};
-
-&usb0 {
-	clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
-};
-
-&usb1 {
-	clocks = <&zynqmp_clk USB1_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
-};
-
-&watchdog0 {
-	clocks = <&zynqmp_clk WDT>;
-};
diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts
index 8b8dd84c1dc3..8c467ee97045 100644
--- a/arch/arm/dts/zynqmp-zcu104-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revA.dts
@@ -8,4 +8,3 @@
  */
 
 #include <arm64/xilinx/zynqmp-zcu104-revA.dts>
-#include "zynqmp-clk.dtsi"
-- 
2.29.2


_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux