Re: Heartbeat LED during init script

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Feb 18, 2021 at 09:00:42AM +0100, Marcel Hellwig wrote:
> Hey Sasha,
> 
> I have a slight problem here:
> This is what I think:
> 
> Because the memtest gets called in the init routine, the `ctrl` is
> completly ignored, at least I can't interrupt it nor the LED blinks.

Yes, ctrlc() is allowed only after startup. We could move calling
poller_call() up, before we test if ctrlc is allowed.

> But if I insert `poller_call`, the led blinks, but the memtest is
> painfully slow (like 10x slower at least).

poller_call() takes some time. A solution might be to call poller_call()
just every thousand times or so in memtest loop.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux