--- Documentation/boards/bcm2835.rst | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/boards/bcm2835.rst b/Documentation/boards/bcm2835.rst index dbdfc2633173..8af6a09c13db 100644 --- a/Documentation/boards/bcm2835.rst +++ b/Documentation/boards/bcm2835.rst @@ -23,12 +23,12 @@ Raspberry Pi kernel=barebox.img enable_uart=1 - If you want to use the mini-uart instead of the PL011, you might need to additionally set:: + If you want to use the mini-uart instead of the PL011, you may need to additionally set:: uart_2ndstage=1 - This is useful on newer boards like the Raspberry Pi Zero W and CM3, which route the - more easily accessible primary UART to the mini-uart. + This is required on boards, like the Raspberry Pi Zero W, that use the mini-uart as the + primary UART. It is needed on boards like the CM3 as well if the mini-uart is to be used. (For more information, refer to the `documentation for config.txt`_.) -- 2.28.0 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox