The upstream device trees reference the stdout-path via alias. barebox overrides them with a path to the node, but the effect is the same as both barebox and the kernel accept both for the property's value. No functional change: serial0 serial1 upstream stdout-path Rpi1 &uart0 &uart1 serial0 Rpi2 &uart0 &uart1 serial0 Rpi3 &uart0 &uart1 serial1 Tested on a Raspberry Pi 3B. Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx> Signed-off-by: Ahmad Fatoum <ahmad@xxxxxx> --- arch/arm/dts/bcm2835-rpi.dts | 6 ------ arch/arm/dts/bcm2836-rpi-2.dts | 6 ------ arch/arm/dts/bcm2837-rpi-3.dts | 6 ------ 3 files changed, 18 deletions(-) diff --git a/arch/arm/dts/bcm2835-rpi.dts b/arch/arm/dts/bcm2835-rpi.dts index cc5a8a927112..121edebdb3a0 100644 --- a/arch/arm/dts/bcm2835-rpi.dts +++ b/arch/arm/dts/bcm2835-rpi.dts @@ -1,11 +1,5 @@ #include <arm/bcm2835-rpi-a.dts> -/ { - chosen { - stdout-path = &uart0; - }; -}; - &{/memory@0} { reg = <0x0 0x0>; }; diff --git a/arch/arm/dts/bcm2836-rpi-2.dts b/arch/arm/dts/bcm2836-rpi-2.dts index c9c3892d6a21..c9106515ee1f 100644 --- a/arch/arm/dts/bcm2836-rpi-2.dts +++ b/arch/arm/dts/bcm2836-rpi-2.dts @@ -1,11 +1,5 @@ #include <arm/bcm2836-rpi-2-b.dts> -/ { - chosen { - stdout-path = &uart0; - }; -}; - &{/memory@0} { reg = <0x0 0x0>; }; diff --git a/arch/arm/dts/bcm2837-rpi-3.dts b/arch/arm/dts/bcm2837-rpi-3.dts index d66beddb2281..e82d518fa551 100644 --- a/arch/arm/dts/bcm2837-rpi-3.dts +++ b/arch/arm/dts/bcm2837-rpi-3.dts @@ -1,11 +1,5 @@ #include <arm64/broadcom/bcm2837-rpi-3-b.dts> -/ { - chosen { - stdout-path = &uart1; - }; -}; - &{/memory@0} { reg = <0x0 0x0>; }; -- 2.28.0 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox