Re: i.MX6Q ldb after 2019.02

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/13/20 9:51 AM, Alexander Shiyan wrote:
Hello All.

I am having problems updating the barebox from version 2019.02 to version 2020.10.
The barebox i.MX6 CLK driver now uses several patches compared to the previous
version to fix the err009219 bug, and the display no more works as before.
I use a board based on i.MX6Q revision 1.2. With the old bootloader, the LVDS channel
is initialized and I can display the splash screen in the barebox. After loading the kernel,
everything works too.
I added source selection for LVDS channels and the kernel works with these additions.
&clks {
	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
			  <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
};

The splash screen in new version is not displayed in the barebox.
So, the question, what I do incorrect and how to fix this?
Old clk_dump:
     pll5_video (rate 716800008, enabled)
         pll5_post_div (rate 179200002, enabled)
             pll5_video_div (rate 44800001, enabled)
                 ldb_di0_sel (rate 44800001, enabled)
                     ldb_di0_div_3_5 (rate 12800000, enabled)
                         ldb_di0_podf (rate 6400000, enabled)
                             ipu1_di0_sel (rate 6400000, enabled)
                                 ipu1_di0 (rate 6400000, enabled)
                                     2400000.ipu@2400000.of_di0_pixel (rate 6400000, enabled)
                             ldb_di0 (rate 6400000, enabled)
New:
     pll5_video (rate 716800008, enable_count: 1, unknown)
         pll5_post_div (rate 358400004, enable_count: 1, always enabled)

This is a div2. Should be div4

             pll5_video_div (rate 179200002, enable_count: 1, always enabled)
                 ldb_di0_sel (rate 179200002, enable_count: 1, always enabled)
                     ldb_di0_div_3_5 (rate 51200000, enable_count: 1, always enabled)
                         ldb_di0_podf (rate 25600000, enable_count: 1, always enabled)
                             ipu1_di0_sel (rate 25600000, enable_count: 1, always enabled)
                                 ipu1_di0 (rate 25600000, enable_count: 1, enabled)
                                     2400000.ipu@2400000.of_di0_pixel (rate 6400000, enable_count: 1, always enabled)
                             ldb_di0 (rate 25600000, enable_count: 0, enabled)

Can anyone help me to resolve this?

Try to use pll5_post_div as div4 of the original pll5_video. All others should be adapting correctly then.

Thanks!

---
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



--
Eurek s.r.l.                          |
Electronic Engineering                | http://www.eurek.it
via Celletta 8/B, 40026 Imola, Italy  | Phone: +39-(0)542-609120
p.iva 00690621206 - c.f. 04020030377  | Fax:   +39-(0)542-609212

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux