On Tue, Oct 20, 2020 at 01:15:37PM +0200, Uwe Kleine-König wrote: > Instead of just ignoring errors related to regulator getting error out. > In case there is no regulator in the device tree, regulator_get() returns > the dummy regulator and not an error code, so the change is right for > this situation, too. > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> > --- > drivers/usb/imx/chipidea-imx.c | 7 +++++-- > 1 file changed, 5 insertions(+), 2 deletions(-) > > diff --git a/drivers/usb/imx/chipidea-imx.c b/drivers/usb/imx/chipidea-imx.c > index 786beede6d89..dd0e3c1a2a58 100644 > --- a/drivers/usb/imx/chipidea-imx.c > +++ b/drivers/usb/imx/chipidea-imx.c > @@ -267,8 +267,11 @@ static int imx_chipidea_probe(struct device_d *dev) > } > > ci->vbus = regulator_get(dev, "vbus"); > - if (IS_ERR(ci->vbus)) > - ci->vbus = NULL; > + if (IS_ERR(ci->vbus)) { > + ret = ERR_PTR(ci->vbus); > + dev_err(dev, "Cannot get vbus regulator: %s\n", strerror(-ret)); > + return ret; > + } Ok, as Marco noted we had regressions in similar cases where we didn't have a driver for the regulator, but knew that it was default enabled. Therefore I am dropping this patch. Sascha -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox