On Thu, Jun 18, 2020 at 11:10:50AM +0200, Ahmad Fatoum wrote:
> The spec[1] says that top level memory nodes `shall have device_type =
> "memory"'. Since 8226f7f9 ("of: base: parse all available memory nodes"),
> we parse only nodes with device_type = "memory", so we should add the
> device_type property where ever it's missing. When the nodes were first
> added, this wasn't an issue because the skeleton.dtsi defined a memory
> skeleton with correct device_type, but this was removed upstream and
> imported into barebox along with 1dc748b3 ("dts: update to v5.1-rc1").
>
> Upstream device trees with a memory node were adapted to have
> device_type = "memory" in-line. This wasn't the case for nodes defined
> only within barebox. Rectify this now and rename the nodes to feature a
> unit name as well to be aligned with the upstream trend.
>
> [1]: https://github.com/devicetree-org/devicetree-specification/releases/download/v0.3/devicetree-specification-v0.3.pdf
>
> Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
> ---
> arch/arm/dts/am335x-afi-gf.dts | 2 +-
> arch/arm/dts/am35xx-pfc-750_820x.dts | 2 +-
> arch/arm/dts/imx51-genesi-efika-sb.dts | 3 ++-
> arch/arm/dts/imx6dl-eltec-hipercam.dts | 3 ++-
> arch/arm/dts/imx6dl-mba6x.dts | 3 ++-
> arch/arm/dts/imx6q-guf-santaro.dts | 3 ++-
> arch/arm/dts/imx6q-mba6x.dts | 3 ++-
> arch/arm/dts/imx6q-var-som.dtsi | 3 ++-
> arch/arm/dts/imx6qdl-udoo.dtsi | 3 ++-
> arch/arm/dts/imx7d-phyboard-zeta.dts | 4 ++--
> arch/arm/dts/imx7d-phycore-som.dtsi | 5 +++--
> arch/arm/dts/imx7d-sdb.dts | 2 +-
> arch/arm/dts/module-mb7707.dts | 3 ++-
> arch/arm/dts/rk3288-phycore-som.dts | 3 ++-
> arch/arm/dts/virt2real.dts | 2 +-
> 15 files changed, 27 insertions(+), 17 deletions(-)
>
> diff --git a/arch/arm/dts/am335x-afi-gf.dts b/arch/arm/dts/am335x-afi-gf.dts
> index 961fe2e241bc..cba8cbc8d6b7 100644
> --- a/arch/arm/dts/am335x-afi-gf.dts
> +++ b/arch/arm/dts/am335x-afi-gf.dts
> @@ -29,7 +29,7 @@
> };
> };
>
> - memory {
> + memory@80000000 {
> device_type = "memory";
> reg = <0x80000000 0x10000000>; /* 128 MB */
> };
The am335x devices register their memory banks with values read back
from the memory controller in arch/arm/mach-omap/am33xx_scrm.c
> diff --git a/arch/arm/dts/imx51-genesi-efika-sb.dts b/arch/arm/dts/imx51-genesi-efika-sb.dts
> index 23e6ea416534..fb62fe2c7295 100644
> --- a/arch/arm/dts/imx51-genesi-efika-sb.dts
> +++ b/arch/arm/dts/imx51-genesi-efika-sb.dts
> @@ -35,7 +35,8 @@
> };
> };
>
> - memory {
> + memory@90000000 {
> + device_type = "memory";
> reg = <0x90000000 0x20000000>;
> };
The i.MX devices register their memory banks with values read back from
the memory controller in arch/arm/mach-imx/esdctl.c
For these boards it's probably better to remove the memory nodes
entirely.
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
