Many clock source and GPIO controller drivers don't have a prompt, but
are instead default y if their respective platform is enabled. Maintain
this behavior, but add a prompt for when COMPILE_TEST is enabled, so
they can be included in test builds.
Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
---
drivers/clocksource/Kconfig | 16 +++++++++-------
drivers/gpio/Kconfig | 12 ++++++++----
drivers/pinctrl/Kconfig | 8 ++++----
3 files changed, 21 insertions(+), 15 deletions(-)
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 8805cda39e02..bc2aae7ad723 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -75,16 +75,18 @@ config CLOCKSOURCE_ATMEL_PIT
bool
config CLOCKSOURCE_ARM_ARCHITECTED_TIMER
- bool
- default y
- depends on ARM && (CPU_64v8 || CPU_V7)
+ bool "ARM architected timer clock source" if COMPILE_TEST
+ default y if ARM && (CPU_64v8 || CPU_V7)
+ depends on (ARM && (CPU_64v8 || CPU_V7)) || COMPILE_TEST
config CLOCKSOURCE_ARM_GLOBAL_TIMER
- bool
- depends on ARM && CPU_V7
+ bool "ARM global timer clock source" if COMPILE_TEST
+ depends on (ARM && CPU_V7) || COMPILE_TEST
+
config CLOCKSOURCE_IMX_GPT
- def_bool y
- depends on ARCH_HAS_IMX_GPT
+ bool "i.MX GPT clock source" if COMPILE_TEST
+ default y if ARCH_HAS_IMX_GPT
+ depends on ARCH_HAS_IMX_GPT || COMPILE_TEST
config CLOCKSOURCE_DW_APB_TIMER
bool "DW APB timer driver"
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 5f0ba7994ebe..261b6e666257 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -43,13 +43,16 @@ config GPIO_GENERIC_PLATFORM
GPIO controllers
config GPIO_IMX
- def_bool ARCH_IMX
+ bool "i.MX GPIO controller" if COMPILE_TEST
+ default y if ARCH_IMX
config GPIO_VF610
- def_bool ARCH_VF610
+ bool "VF610 GPIO controller" if COMPILE_TEST
+ default y if ARCH_VF610
config GPIO_MXS
- def_bool ARCH_MXS
+ bool "MXS GPIO controller" if COMPILE_TEST
+ default y if ARCH_MXS
config GPIO_JZ4740
bool "GPIO support for Ingenic SoCs"
@@ -76,7 +79,8 @@ config GPIO_MPC8XXX
MPC512x/831x/834x/837x/8572/8610/QorIQ GPIOs.
config GPIO_OMAP
- def_bool ARCH_OMAP
+ bool "OMAP GPIO controller" if COMPILE_TEST
+ default y if ARCH_OMAP
config GPIO_ORION
bool "GPIO support for Marvell Orion/MVEBU SoCs"
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 5553571983d2..6de9d946720c 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -73,20 +73,20 @@ config PINCTRL_SINGLE
bool "pinctrl single"
config PINCTRL_TEGRA20
- bool
+ bool "Tegra20 pinctrl support" if COMPILE_TEST
default y if ARCH_TEGRA_2x_SOC
help
The pinmux controller found on the Tegra 20 line of SoCs.
config PINCTRL_TEGRA30
- bool
+ bool "Tegra30 pinctrl support" if COMPILE_TEST
default y if ARCH_TEGRA_3x_SOC
default y if ARCH_TEGRA_124_SOC
help
The pinmux controller found on the Tegra 30+ line of SoCs.
config PINCTRL_TEGRA_XUSB
- bool
+ bool "Tegra SerDes pinmux support" if COMPILE_TEST
default y if ARCH_TEGRA_124_SOC
select GENERIC_PHY
help
@@ -100,7 +100,7 @@ config PINCTRL_VF610
Pinmux controller found on Vybrid VF610 family of SoCs
config PINCTRL_STM32
- bool
+ bool "STM32 pinctrl support" if COMPILE_TEST
default y if ARCH_STM32MP
help
Pinmux and GPIO controller found on STM32 family
--
2.26.2
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
