Marco, On Wed, Oct 02, 2019 at 09:20:43AM +0200, Sascha Hauer wrote: > +Cc Christian Hemp who is the author of b6bebb7aca > > On Wed, Sep 11, 2019 at 04:53:28PM +0200, Marco Felsch wrote: > > The PMIC is connected to i2c3 and not i2c1. > > > > Fixes: b6bebb7aca ("ARM: i.MX: phytec-som-imx6: phycore: Set BUCK mode to SYNC") > > Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx> > > --- > > arch/arm/boards/phytec-som-imx6/board.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/arch/arm/boards/phytec-som-imx6/board.c b/arch/arm/boards/phytec-som-imx6/board.c > > index 730115702b..38e5ede91a 100644 > > --- a/arch/arm/boards/phytec-som-imx6/board.c > > +++ b/arch/arm/boards/phytec-som-imx6/board.c > > @@ -117,7 +117,7 @@ static int phycore_da9062_setup_buck_mode(void) > > struct i2c_adapter *adapter = NULL; > > struct i2c_client client; > > unsigned char value; > > - int bus = 0; > > + int bus = 2; > > int ret; > > > > adapter = i2c_get_adapter(bus); You could test it directly on b6bebb7aca instead of master. Is this change necessary there aswell or has the bus numbering changed in between? Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox