On Thu, Sep 26, 2019 at 11:35:24AM +0200, Ahmad Fatoum wrote: > Low level init code may wish the ability to configure pins, e.g. for low > level debug UART. The pinctrl-at91 driver already exports an > at91_mux_pio3_pin function, but that one is only usable after driver > probe. Instead, provide an at91_mux_pio3_pin function, which can be used > at all times. > > Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> > --- > This is yet unused in the barebox tree. > But getting it upstream will decouple the sama5d2 second stage support > from the sama5d3 first stage support, so that both could be sent out > separately. > --- > arch/arm/mach-at91/include/mach/gpio.h | 39 +++++++++++++++++++++++++ > arch/arm/mach-at91/include/mach/iomux.h | 9 +----- > 2 files changed, 40 insertions(+), 8 deletions(-) Applied, thanks Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
