The current support for the ZII RDU2 Board times out on eth0 and eth1 when booting 'net' from an alternative interface, like a USB Ethernet dongle. eth0 is the DSA master interface and has no use within barebox, as well as the gigabit interface eth1 which is wired to the switch port 0. Disable them to allow Barebox to boot right away from network. Signed-off-by: Vivien Didelot <vivien.didelot@xxxxxxxxx> --- arch/arm/boards/zii-imx6q-rdu2/defaultenv-rdu2/nv/dev.eth0.mode | 1 + arch/arm/boards/zii-imx6q-rdu2/defaultenv-rdu2/nv/dev.eth1.mode | 1 + 2 files changed, 2 insertions(+) create mode 100644 arch/arm/boards/zii-imx6q-rdu2/defaultenv-rdu2/nv/dev.eth0.mode create mode 100644 arch/arm/boards/zii-imx6q-rdu2/defaultenv-rdu2/nv/dev.eth1.mode diff --git a/arch/arm/boards/zii-imx6q-rdu2/defaultenv-rdu2/nv/dev.eth0.mode b/arch/arm/boards/zii-imx6q-rdu2/defaultenv-rdu2/nv/dev.eth0.mode new file mode 100644 index 000000000..87e7bdaae --- /dev/null +++ b/arch/arm/boards/zii-imx6q-rdu2/defaultenv-rdu2/nv/dev.eth0.mode @@ -0,0 +1 @@ +disabled \ No newline at end of file diff --git a/arch/arm/boards/zii-imx6q-rdu2/defaultenv-rdu2/nv/dev.eth1.mode b/arch/arm/boards/zii-imx6q-rdu2/defaultenv-rdu2/nv/dev.eth1.mode new file mode 100644 index 000000000..87e7bdaae --- /dev/null +++ b/arch/arm/boards/zii-imx6q-rdu2/defaultenv-rdu2/nv/dev.eth1.mode @@ -0,0 +1 @@ +disabled \ No newline at end of file -- 2.21.0 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
