Hi
I tried this series on R.Pi 3B (make rpi_defconfig +
DEBUG_RPI3_MINI_UART) and Compute Module 3 (make rpi_defconfig +
DEBUG_RPI2_UART) and after the two small fixes I mention in my other
replies they both work as expected. Thanks!
Best regards
Tomaž
On 6. 03. 19 10:42, Sascha Hauer wrote:
This picks up the series from Tomaž and also adds mini UART early
debugging support useful for the rpi3 which comes up with this
UART by default.
The ns16550 early debugging support is done in a generic way which
I tested on Layerscape. I don't have any raspberry pies here, so
totally untested on these boards.
Sascha
Sascha Hauer (5):
ARM: rpi: Move UART base address definitions to header file
debug_ll: Move pl011 header file to architecture independent place
debug_ll: Add ns16550 early debugging functions
ARM: rpi: move debug UART Kconfig settings
ARM: rpi: Add mini UART debug_ll support
arch/arm/boards/raspberry-pi/rpi-common.c | 5 +-
arch/arm/mach-bcm283x/Kconfig | 20 -------
arch/arm/mach-bcm283x/include/mach/debug_ll.h | 51 +++++++++++++++--
arch/arm/mach-bcm283x/include/mach/platform.h | 4 ++
.../arm/mach-highbank/include/mach/debug_ll.h | 2 +-
arch/arm/mach-qemu/include/mach/debug_ll.h | 2 +-
.../mach-versatile/include/mach/debug_ll.h | 2 +-
.../arm/mach-vexpress/include/mach/debug_ll.h | 2 +-
common/Kconfig | 19 +++++++
include/debug_ll/ns16550.h | 56 +++++++++++++++++++
.../debug_ll/pl011.h | 0
11 files changed, 130 insertions(+), 33 deletions(-)
create mode 100644 include/debug_ll/ns16550.h
rename arch/arm/include/asm/debug_ll_pl011.h => include/debug_ll/pl011.h (100%)
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
